| Update from original Marvell U-Boot to mainline U-Boot: | |
| ------------------------------------------------------- | |
| Generate the U-Boot image with these commands: | |
| $ make clearfog_defconfig | |
| $ make | |
| The resulting image including the SPL binary with the | |
| full DDR setup is "u-boot-spl.kwb". | |
| Now all you need to do is copy this image on a SD card. | |
| For example with this command: | |
| $ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 | |
| Please use the correct device node for your setup instead | |
| of "/dev/sdX" here! |