| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #ifndef _ENVIRONMENT_H_ |
| #define _ENVIRONMENT_H_ |
| |
| #include <linux/kconfig.h> |
| |
| /************************************************************************** |
| * |
| * The "environment" is stored as a list of '\0' terminated |
| * "name=value" strings. The end of the list is marked by a double |
| * '\0'. New entries are always added at the end. Deleting an entry |
| * shifts the remaining entries to the front. Replacing an entry is a |
| * combination of deleting the old value and adding the new one. |
| * |
| * The environment is preceded by a 32 bit CRC over the data part. |
| * |
| *************************************************************************/ |
| |
| #if defined(CONFIG_ENV_IS_IN_FLASH) |
| # ifndef CONFIG_ENV_ADDR |
| # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) |
| # endif |
| # ifndef CONFIG_ENV_OFFSET |
| # define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) |
| # endif |
| # if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND) |
| # define CONFIG_ENV_ADDR_REDUND \ |
| (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND) |
| # endif |
| # if defined(CONFIG_ENV_SECT_SIZE) || defined(CONFIG_ENV_SIZE) |
| # ifndef CONFIG_ENV_SECT_SIZE |
| # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE |
| # endif |
| # ifndef CONFIG_ENV_SIZE |
| # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE |
| # endif |
| # else |
| # error "Both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE undefined" |
| # endif |
| # if defined(CONFIG_ENV_ADDR_REDUND) && !defined(CONFIG_ENV_SIZE_REDUND) |
| # define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE |
| # endif |
| # if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \ |
| (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) <= \ |
| (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) |
| # define ENV_IS_EMBEDDED |
| # endif |
| # if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND) |
| # define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # endif |
| # ifdef CONFIG_ENV_IS_EMBEDDED |
| # error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" |
| # error "it is calculated automatically for you" |
| # endif |
| #endif /* CONFIG_ENV_IS_IN_FLASH */ |
| |
| #if defined(CONFIG_ENV_IS_IN_MMC) |
| # ifdef CONFIG_ENV_OFFSET_REDUND |
| # define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # endif |
| #endif |
| |
| #if defined(CONFIG_ENV_IS_IN_NAND) |
| # if defined(CONFIG_ENV_OFFSET_OOB) |
| # ifdef CONFIG_ENV_OFFSET_REDUND |
| # error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB" |
| # error "is set" |
| # endif |
| extern unsigned long nand_env_oob_offset; |
| # define CONFIG_ENV_OFFSET nand_env_oob_offset |
| # else |
| # ifndef CONFIG_ENV_OFFSET |
| # error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" |
| # endif |
| # ifdef CONFIG_ENV_OFFSET_REDUND |
| # define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # endif |
| # endif /* CONFIG_ENV_OFFSET_OOB */ |
| # ifndef CONFIG_ENV_SIZE |
| # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND" |
| # endif |
| #endif /* CONFIG_ENV_IS_IN_NAND */ |
| |
| #if defined(CONFIG_ENV_IS_IN_UBI) |
| # ifndef CONFIG_ENV_UBI_PART |
| # error "Need to define CONFIG_ENV_UBI_PART when using CONFIG_ENV_IS_IN_UBI" |
| # endif |
| # ifndef CONFIG_ENV_UBI_VOLUME |
| # error "Need to define CONFIG_ENV_UBI_VOLUME when using CONFIG_ENV_IS_IN_UBI" |
| # endif |
| # if defined(CONFIG_ENV_UBI_VOLUME_REDUND) |
| # define CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # endif |
| # ifndef CONFIG_ENV_SIZE |
| # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_UBI" |
| # endif |
| # ifndef CONFIG_CMD_UBI |
| # error "Need to define CONFIG_CMD_UBI when using CONFIG_ENV_IS_IN_UBI" |
| # endif |
| #endif /* CONFIG_ENV_IS_IN_UBI */ |
| |
| /* Embedded env is only supported for some flash types */ |
| #ifdef CONFIG_ENV_IS_EMBEDDED |
| # if !defined(CONFIG_ENV_IS_IN_FLASH) && \ |
| !defined(CONFIG_ENV_IS_IN_NAND) && \ |
| !defined(CONFIG_ENV_IS_IN_ONENAND) && \ |
| !defined(CONFIG_ENV_IS_IN_SPI_FLASH) |
| # error "CONFIG_ENV_IS_EMBEDDED not supported for your flash type" |
| # endif |
| #endif |
| |
| /* |
| * For the flash types where embedded env is supported, but it cannot be |
| * calculated automatically (i.e. NAND), take the board opt-in. |
| */ |
| #if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) |
| # define ENV_IS_EMBEDDED |
| #endif |
| |
| /* The build system likes to know if the env is embedded */ |
| #ifdef DO_DEPS_ONLY |
| # ifdef ENV_IS_EMBEDDED |
| # ifndef CONFIG_ENV_IS_EMBEDDED |
| # define CONFIG_ENV_IS_EMBEDDED |
| # endif |
| # endif |
| #endif |
| |
| #include "compiler.h" |
| |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| # define ENV_HEADER_SIZE (sizeof(uint32_t) + 1) |
| |
| # define ACTIVE_FLAG 1 |
| # define OBSOLETE_FLAG 0 |
| #else |
| # define ENV_HEADER_SIZE (sizeof(uint32_t)) |
| #endif |
| |
| #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) |
| |
| typedef struct environment_s { |
| uint32_t crc; /* CRC32 over data bytes */ |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| unsigned char flags; /* active/obsolete flags */ |
| #endif |
| unsigned char data[ENV_SIZE]; /* Environment data */ |
| } env_t; |
| |
| #ifdef ENV_IS_EMBEDDED |
| extern env_t environment; |
| #endif /* ENV_IS_EMBEDDED */ |
| |
| extern const unsigned char default_environment[]; |
| |
| #if defined(CONFIG_NEEDS_MANUAL_RELOC) |
| extern void env_reloc(void); |
| #endif |
| |
| #ifndef DO_DEPS_ONLY |
| |
| #include <env_attr.h> |
| #include <env_callback.h> |
| #include <env_flags.h> |
| #include <search.h> |
| |
| /* Value for environment validity */ |
| enum env_valid { |
| ENV_INVALID, /* No valid environment */ |
| ENV_VALID, /* First or only environment is valid */ |
| ENV_REDUND, /* Redundant environment is valid */ |
| }; |
| |
| enum env_location { |
| ENVL_UNKNOWN, |
| ENVL_EEPROM, |
| ENVL_ESATA, |
| ENVL_EXT4, |
| ENVL_FAT, |
| ENVL_FLASH, |
| ENVL_MMC, |
| ENVL_NAND, |
| ENVL_NVRAM, |
| ENVL_ONENAND, |
| ENVL_REMOTE, |
| ENVL_SPI_FLASH, |
| ENVL_UBI, |
| ENVL_NOWHERE, |
| |
| ENVL_COUNT, |
| }; |
| |
| /* value for the various operations we want to perform on the env */ |
| enum env_operation { |
| ENVOP_GET_CHAR, /* we want to call the get_char function */ |
| ENVOP_INIT, /* we want to call the init function */ |
| ENVOP_LOAD, /* we want to call the load function */ |
| ENVOP_SAVE, /* we want to call the save function */ |
| }; |
| |
| struct env_driver { |
| const char *name; |
| enum env_location location; |
| |
| /** |
| * load() - Load the environment from storage |
| * |
| * This method is optional. If not provided, no environment will be |
| * loaded. |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int (*load)(void); |
| |
| /** |
| * save() - Save the environment to storage |
| * |
| * This method is required for 'saveenv' to work. |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int (*save)(void); |
| |
| /** |
| * init() - Set up the initial pre-relocation environment |
| * |
| * This method is optional. |
| * |
| * @return 0 if OK, -ENOENT if no initial environment could be found, |
| * other -ve on error |
| */ |
| int (*init)(void); |
| }; |
| |
| /* Declare a new environment location driver */ |
| #define U_BOOT_ENV_LOCATION(__name) \ |
| ll_entry_declare(struct env_driver, __name, env_driver) |
| |
| /* Declare the name of a location */ |
| #ifdef CONFIG_CMD_SAVEENV |
| #define ENV_NAME(_name) .name = _name, |
| #else |
| #define ENV_NAME(_name) |
| #endif |
| |
| #ifdef CONFIG_CMD_SAVEENV |
| #define env_save_ptr(x) x |
| #else |
| #define env_save_ptr(x) NULL |
| #endif |
| |
| extern struct hsearch_data env_htab; |
| |
| /* Function that updates CRC of the enironment */ |
| void env_crc_update(void); |
| |
| /* Look up the variable from the default environment */ |
| char *env_get_default(const char *name); |
| |
| /* [re]set to the default environment */ |
| void set_default_env(const char *s, int flags); |
| |
| /* [re]set individual variables to their value in the default environment */ |
| int set_default_vars(int nvars, char * const vars[], int flags); |
| |
| /* Import from binary representation into hash table */ |
| int env_import(const char *buf, int check); |
| |
| /* Export from hash table into binary representation */ |
| int env_export(env_t *env_out); |
| |
| #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT |
| /* Select and import one of two redundant environments */ |
| int env_import_redund(const char *buf1, int buf1_status, |
| const char *buf2, int buf2_status); |
| #endif |
| |
| /** |
| * env_get_char() - Get a character from the early environment |
| * |
| * This reads from the pre-relocation environment |
| * |
| * @index: Index of character to read (0 = first) |
| * @return character read, or -ve on error |
| */ |
| int env_get_char(int index); |
| |
| /** |
| * env_load() - Load the environment from storage |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int env_load(void); |
| |
| /** |
| * env_save() - Save the environment to storage |
| * |
| * @return 0 if OK, -ve on error |
| */ |
| int env_save(void); |
| |
| /** |
| * env_fix_drivers() - Updates envdriver as per relocation |
| */ |
| void env_fix_drivers(void); |
| |
| void eth_parse_enetaddr(const char *addr, uint8_t *enetaddr); |
| int eth_env_get_enetaddr(const char *name, uint8_t *enetaddr); |
| int eth_env_set_enetaddr(const char *name, const uint8_t *enetaddr); |
| |
| #endif /* DO_DEPS_ONLY */ |
| |
| #endif /* _ENVIRONMENT_H_ */ |