| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * From Coreboot file of same name |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * Copyright (C) 2011 The Chromium Authors |
| */ |
| |
| #include <common.h> |
| #include <cpu.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <malloc.h> |
| #include <asm/cpu.h> |
| #include <asm/cpu_x86.h> |
| #include <asm/msr.h> |
| #include <asm/msr-index.h> |
| #include <asm/mtrr.h> |
| #include <asm/processor.h> |
| #include <asm/speedstep.h> |
| #include <asm/turbo.h> |
| #include <asm/arch/model_206ax.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void enable_vmx(void) |
| { |
| struct cpuid_result regs; |
| #ifdef CONFIG_ENABLE_VMX |
| int enable = true; |
| #else |
| int enable = false; |
| #endif |
| msr_t msr; |
| |
| regs = cpuid(1); |
| /* Check that the VMX is supported before reading or writing the MSR. */ |
| if (!((regs.ecx & CPUID_VMX) || (regs.ecx & CPUID_SMX))) |
| return; |
| |
| msr = msr_read(MSR_IA32_FEATURE_CONTROL); |
| |
| if (msr.lo & (1 << 0)) { |
| debug("VMX is locked, so %s will do nothing\n", __func__); |
| /* VMX locked. If we set it again we get an illegal |
| * instruction |
| */ |
| return; |
| } |
| |
| /* The IA32_FEATURE_CONTROL MSR may initialize with random values. |
| * It must be cleared regardless of VMX config setting. |
| */ |
| msr.hi = 0; |
| msr.lo = 0; |
| |
| debug("%s VMX\n", enable ? "Enabling" : "Disabling"); |
| |
| /* |
| * Even though the Intel manual says you must set the lock bit in |
| * addition to the VMX bit in order for VMX to work, it is incorrect. |
| * Thus we leave it unlocked for the OS to manage things itself. |
| * This is good for a few reasons: |
| * - No need to reflash the bios just to toggle the lock bit. |
| * - The VMX bits really really should match each other across cores, |
| * so hard locking it on one while another has the opposite setting |
| * can easily lead to crashes as code using VMX migrates between |
| * them. |
| * - Vendors that want to "upsell" from a bios that disables+locks to |
| * one that doesn't is sleazy. |
| * By leaving this to the OS (e.g. Linux), people can do exactly what |
| * they want on the fly, and do it correctly (e.g. across multiple |
| * cores). |
| */ |
| if (enable) { |
| msr.lo |= (1 << 2); |
| if (regs.ecx & CPUID_SMX) |
| msr.lo |= (1 << 1); |
| } |
| |
| msr_write(MSR_IA32_FEATURE_CONTROL, msr); |
| } |
| |
| /* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ |
| static const u8 power_limit_time_sec_to_msr[] = { |
| [0] = 0x00, |
| [1] = 0x0a, |
| [2] = 0x0b, |
| [3] = 0x4b, |
| [4] = 0x0c, |
| [5] = 0x2c, |
| [6] = 0x4c, |
| [7] = 0x6c, |
| [8] = 0x0d, |
| [10] = 0x2d, |
| [12] = 0x4d, |
| [14] = 0x6d, |
| [16] = 0x0e, |
| [20] = 0x2e, |
| [24] = 0x4e, |
| [28] = 0x6e, |
| [32] = 0x0f, |
| [40] = 0x2f, |
| [48] = 0x4f, |
| [56] = 0x6f, |
| [64] = 0x10, |
| [80] = 0x30, |
| [96] = 0x50, |
| [112] = 0x70, |
| [128] = 0x11, |
| }; |
| |
| /* Convert POWER_LIMIT_1_TIME MSR value to seconds */ |
| static const u8 power_limit_time_msr_to_sec[] = { |
| [0x00] = 0, |
| [0x0a] = 1, |
| [0x0b] = 2, |
| [0x4b] = 3, |
| [0x0c] = 4, |
| [0x2c] = 5, |
| [0x4c] = 6, |
| [0x6c] = 7, |
| [0x0d] = 8, |
| [0x2d] = 10, |
| [0x4d] = 12, |
| [0x6d] = 14, |
| [0x0e] = 16, |
| [0x2e] = 20, |
| [0x4e] = 24, |
| [0x6e] = 28, |
| [0x0f] = 32, |
| [0x2f] = 40, |
| [0x4f] = 48, |
| [0x6f] = 56, |
| [0x10] = 64, |
| [0x30] = 80, |
| [0x50] = 96, |
| [0x70] = 112, |
| [0x11] = 128, |
| }; |
| |
| int cpu_config_tdp_levels(void) |
| { |
| struct cpuid_result result; |
| msr_t platform_info; |
| |
| /* Minimum CPU revision */ |
| result = cpuid(1); |
| if (result.eax < IVB_CONFIG_TDP_MIN_CPUID) |
| return 0; |
| |
| /* Bits 34:33 indicate how many levels supported */ |
| platform_info = msr_read(MSR_PLATFORM_INFO); |
| return (platform_info.hi >> 1) & 3; |
| } |
| |
| /* |
| * Configure processor power limits if possible |
| * This must be done AFTER set of BIOS_RESET_CPL |
| */ |
| void set_power_limits(u8 power_limit_1_time) |
| { |
| msr_t msr = msr_read(MSR_PLATFORM_INFO); |
| msr_t limit; |
| unsigned power_unit; |
| unsigned tdp, min_power, max_power, max_time; |
| u8 power_limit_1_val; |
| |
| if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr)) |
| return; |
| |
| if (!(msr.lo & PLATFORM_INFO_SET_TDP)) |
| return; |
| |
| /* Get units */ |
| msr = msr_read(MSR_PKG_POWER_SKU_UNIT); |
| power_unit = 2 << ((msr.lo & 0xf) - 1); |
| |
| /* Get power defaults for this SKU */ |
| msr = msr_read(MSR_PKG_POWER_SKU); |
| tdp = msr.lo & 0x7fff; |
| min_power = (msr.lo >> 16) & 0x7fff; |
| max_power = msr.hi & 0x7fff; |
| max_time = (msr.hi >> 16) & 0x7f; |
| |
| debug("CPU TDP: %u Watts\n", tdp / power_unit); |
| |
| if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) |
| power_limit_1_time = power_limit_time_msr_to_sec[max_time]; |
| |
| if (min_power > 0 && tdp < min_power) |
| tdp = min_power; |
| |
| if (max_power > 0 && tdp > max_power) |
| tdp = max_power; |
| |
| power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; |
| |
| /* Set long term power limit to TDP */ |
| limit.lo = 0; |
| limit.lo |= tdp & PKG_POWER_LIMIT_MASK; |
| limit.lo |= PKG_POWER_LIMIT_EN; |
| limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << |
| PKG_POWER_LIMIT_TIME_SHIFT; |
| |
| /* Set short term power limit to 1.25 * TDP */ |
| limit.hi = 0; |
| limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; |
| limit.hi |= PKG_POWER_LIMIT_EN; |
| /* Power limit 2 time is only programmable on SNB EP/EX */ |
| |
| msr_write(MSR_PKG_POWER_LIMIT, limit); |
| |
| /* Use nominal TDP values for CPUs with configurable TDP */ |
| if (cpu_config_tdp_levels()) { |
| msr = msr_read(MSR_CONFIG_TDP_NOMINAL); |
| limit.hi = 0; |
| limit.lo = msr.lo & 0xff; |
| msr_write(MSR_TURBO_ACTIVATION_RATIO, limit); |
| } |
| } |
| |
| static void configure_c_states(void) |
| { |
| struct cpuid_result result; |
| msr_t msr; |
| |
| msr = msr_read(MSR_PMG_CST_CONFIG_CTL); |
| msr.lo |= (1 << 28); /* C1 Auto Undemotion Enable */ |
| msr.lo |= (1 << 27); /* C3 Auto Undemotion Enable */ |
| msr.lo |= (1 << 26); /* C1 Auto Demotion Enable */ |
| msr.lo |= (1 << 25); /* C3 Auto Demotion Enable */ |
| msr.lo &= ~(1 << 10); /* Disable IO MWAIT redirection */ |
| msr.lo |= 7; /* No package C-state limit */ |
| msr_write(MSR_PMG_CST_CONFIG_CTL, msr); |
| |
| msr = msr_read(MSR_PMG_IO_CAPTURE_ADR); |
| msr.lo &= ~0x7ffff; |
| msr.lo |= (PMB0_BASE + 4); /* LVL_2 base address */ |
| msr.lo |= (2 << 16); /* CST Range: C7 is max C-state */ |
| msr_write(MSR_PMG_IO_CAPTURE_ADR, msr); |
| |
| msr = msr_read(MSR_MISC_PWR_MGMT); |
| msr.lo &= ~(1 << 0); /* Enable P-state HW_ALL coordination */ |
| msr_write(MSR_MISC_PWR_MGMT, msr); |
| |
| msr = msr_read(MSR_POWER_CTL); |
| msr.lo |= (1 << 18); /* Enable Energy Perf Bias MSR 0x1b0 */ |
| msr.lo |= (1 << 1); /* C1E Enable */ |
| msr.lo |= (1 << 0); /* Bi-directional PROCHOT# */ |
| msr_write(MSR_POWER_CTL, msr); |
| |
| /* C3 Interrupt Response Time Limit */ |
| msr.hi = 0; |
| msr.lo = IRTL_VALID | IRTL_1024_NS | 0x50; |
| msr_write(MSR_PKGC3_IRTL, msr); |
| |
| /* C6 Interrupt Response Time Limit */ |
| msr.hi = 0; |
| msr.lo = IRTL_VALID | IRTL_1024_NS | 0x68; |
| msr_write(MSR_PKGC6_IRTL, msr); |
| |
| /* C7 Interrupt Response Time Limit */ |
| msr.hi = 0; |
| msr.lo = IRTL_VALID | IRTL_1024_NS | 0x6D; |
| msr_write(MSR_PKGC7_IRTL, msr); |
| |
| /* Primary Plane Current Limit */ |
| msr = msr_read(MSR_PP0_CURRENT_CONFIG); |
| msr.lo &= ~0x1fff; |
| msr.lo |= PP0_CURRENT_LIMIT; |
| msr_write(MSR_PP0_CURRENT_CONFIG, msr); |
| |
| /* Secondary Plane Current Limit */ |
| msr = msr_read(MSR_PP1_CURRENT_CONFIG); |
| msr.lo &= ~0x1fff; |
| result = cpuid(1); |
| if (result.eax >= 0x30600) |
| msr.lo |= PP1_CURRENT_LIMIT_IVB; |
| else |
| msr.lo |= PP1_CURRENT_LIMIT_SNB; |
| msr_write(MSR_PP1_CURRENT_CONFIG, msr); |
| } |
| |
| static int configure_thermal_target(struct udevice *dev) |
| { |
| int tcc_offset; |
| msr_t msr; |
| |
| tcc_offset = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), |
| "tcc-offset", 0); |
| |
| /* Set TCC activaiton offset if supported */ |
| msr = msr_read(MSR_PLATFORM_INFO); |
| if ((msr.lo & (1 << 30)) && tcc_offset) { |
| msr = msr_read(MSR_TEMPERATURE_TARGET); |
| msr.lo &= ~(0xf << 24); /* Bits 27:24 */ |
| msr.lo |= (tcc_offset & 0xf) << 24; |
| msr_write(MSR_TEMPERATURE_TARGET, msr); |
| } |
| |
| return 0; |
| } |
| |
| static void configure_misc(void) |
| { |
| msr_t msr; |
| |
| msr = msr_read(IA32_MISC_ENABLE); |
| msr.lo |= (1 << 0); /* Fast String enable */ |
| msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ |
| msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ |
| msr_write(IA32_MISC_ENABLE, msr); |
| |
| /* Disable Thermal interrupts */ |
| msr.lo = 0; |
| msr.hi = 0; |
| msr_write(IA32_THERM_INTERRUPT, msr); |
| |
| /* Enable package critical interrupt only */ |
| msr.lo = 1 << 4; |
| msr.hi = 0; |
| msr_write(IA32_PACKAGE_THERM_INTERRUPT, msr); |
| } |
| |
| static void enable_lapic_tpr(void) |
| { |
| msr_t msr; |
| |
| msr = msr_read(MSR_PIC_MSG_CONTROL); |
| msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ |
| msr_write(MSR_PIC_MSG_CONTROL, msr); |
| } |
| |
| static void configure_dca_cap(void) |
| { |
| struct cpuid_result cpuid_regs; |
| msr_t msr; |
| |
| /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ |
| cpuid_regs = cpuid(1); |
| if (cpuid_regs.ecx & (1 << 18)) { |
| msr = msr_read(IA32_PLATFORM_DCA_CAP); |
| msr.lo |= 1; |
| msr_write(IA32_PLATFORM_DCA_CAP, msr); |
| } |
| } |
| |
| static void set_max_ratio(void) |
| { |
| msr_t msr, perf_ctl; |
| |
| perf_ctl.hi = 0; |
| |
| /* Check for configurable TDP option */ |
| if (cpu_config_tdp_levels()) { |
| /* Set to nominal TDP ratio */ |
| msr = msr_read(MSR_CONFIG_TDP_NOMINAL); |
| perf_ctl.lo = (msr.lo & 0xff) << 8; |
| } else { |
| /* Platform Info bits 15:8 give max ratio */ |
| msr = msr_read(MSR_PLATFORM_INFO); |
| perf_ctl.lo = msr.lo & 0xff00; |
| } |
| msr_write(MSR_IA32_PERF_CTL, perf_ctl); |
| |
| debug("model_x06ax: frequency set to %d\n", |
| ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK); |
| } |
| |
| static void set_energy_perf_bias(u8 policy) |
| { |
| msr_t msr; |
| |
| /* Energy Policy is bits 3:0 */ |
| msr = msr_read(IA32_ENERGY_PERFORMANCE_BIAS); |
| msr.lo &= ~0xf; |
| msr.lo |= policy & 0xf; |
| msr_write(IA32_ENERGY_PERFORMANCE_BIAS, msr); |
| |
| debug("model_x06ax: energy policy set to %u\n", policy); |
| } |
| |
| static void configure_mca(void) |
| { |
| msr_t msr; |
| int i; |
| |
| msr.lo = 0; |
| msr.hi = 0; |
| /* This should only be done on a cold boot */ |
| for (i = 0; i < 7; i++) |
| msr_write(IA32_MC0_STATUS + (i * 4), msr); |
| } |
| |
| static int model_206ax_init(struct udevice *dev) |
| { |
| int ret; |
| |
| /* Clear out pending MCEs */ |
| configure_mca(); |
| |
| /* Enable the local cpu apics */ |
| enable_lapic_tpr(); |
| |
| /* Enable virtualization if enabled in CMOS */ |
| enable_vmx(); |
| |
| /* Configure C States */ |
| configure_c_states(); |
| |
| /* Configure Enhanced SpeedStep and Thermal Sensors */ |
| configure_misc(); |
| |
| /* Thermal throttle activation offset */ |
| ret = configure_thermal_target(dev); |
| if (ret) { |
| debug("Cannot set thermal target\n"); |
| return ret; |
| } |
| |
| /* Enable Direct Cache Access */ |
| configure_dca_cap(); |
| |
| /* Set energy policy */ |
| set_energy_perf_bias(ENERGY_POLICY_NORMAL); |
| |
| /* Set Max Ratio */ |
| set_max_ratio(); |
| |
| /* Enable Turbo */ |
| turbo_enable(); |
| |
| return 0; |
| } |
| |
| static int model_206ax_get_info(struct udevice *dev, struct cpu_info *info) |
| { |
| msr_t msr; |
| |
| msr = msr_read(MSR_IA32_PERF_CTL); |
| info->cpu_freq = ((msr.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK * 1000000; |
| info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU | |
| 1 << CPU_FEAT_UCODE; |
| |
| return 0; |
| } |
| |
| static int model_206ax_get_count(struct udevice *dev) |
| { |
| return 4; |
| } |
| |
| static int cpu_x86_model_206ax_probe(struct udevice *dev) |
| { |
| if (dev->seq == 0) |
| model_206ax_init(dev); |
| |
| return 0; |
| } |
| |
| static const struct cpu_ops cpu_x86_model_206ax_ops = { |
| .get_desc = cpu_x86_get_desc, |
| .get_info = model_206ax_get_info, |
| .get_count = model_206ax_get_count, |
| .get_vendor = cpu_x86_get_vendor, |
| }; |
| |
| static const struct udevice_id cpu_x86_model_206ax_ids[] = { |
| { .compatible = "intel,core-gen3" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(cpu_x86_model_206ax_drv) = { |
| .name = "cpu_x86_model_206ax", |
| .id = UCLASS_CPU, |
| .of_match = cpu_x86_model_206ax_ids, |
| .bind = cpu_x86_bind, |
| .probe = cpu_x86_model_206ax_probe, |
| .ops = &cpu_x86_model_206ax_ops, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |