include/linux/mfd/max8997.h - linux-mtk - Git at Google

 /*
  * max8997.h - Driver for the Maxim 8997/8966
  *
  *  Copyright (C) 2009-2010 Samsung Electrnoics
  *  MyungJoo Ham <myungjoo.ham@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  * This driver is based on max8998.h
  *
  * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
  * Except Fuel Gauge, every device shares the same I2C bus and included in
  * this mfd driver. Although the fuel gauge is included in the chip, it is
  * excluded from the driver because a) it has a different I2C bus from
  * others and b) it can be enabled simply by using MAX17042 driver.
  */

 #ifndef __LINUX_MFD_MAX8998_H
 #define __LINUX_MFD_MAX8998_H

 #include <linux/regulator/consumer.h>

 /* MAX8997/8966 regulator IDs */
 enum max8998_regulators {
 	MAX8997_LDO1 = 0,
 	MAX8997_LDO2,
 	MAX8997_LDO3,
 	MAX8997_LDO4,
 	MAX8997_LDO5,
 	MAX8997_LDO6,
 	MAX8997_LDO7,
 	MAX8997_LDO8,
 	MAX8997_LDO9,
 	MAX8997_LDO10,
 	MAX8997_LDO11,
 	MAX8997_LDO12,
 	MAX8997_LDO13,
 	MAX8997_LDO14,
 	MAX8997_LDO15,
 	MAX8997_LDO16,
 	MAX8997_LDO17,
 	MAX8997_LDO18,
 	MAX8997_LDO21,
 	MAX8997_BUCK1,
 	MAX8997_BUCK2,
 	MAX8997_BUCK3,
 	MAX8997_BUCK4,
 	MAX8997_BUCK5,
 	MAX8997_BUCK6,
 	MAX8997_BUCK7,
 	MAX8997_EN32KHZ_AP,
 	MAX8997_EN32KHZ_CP,
 	MAX8997_ENVICHG,
 	MAX8997_ESAFEOUT1,
 	MAX8997_ESAFEOUT2,
 	MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
 	MAX8997_CHARGER, /* charger current, MBCCTRL4 */
 	MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */

 	MAX8997_REG_MAX,
 };

 struct max8997_regulator_data {
 	int id;
 	struct regulator_init_data *initdata;
 	struct device_node *reg_node;
 };

 struct max8997_muic_reg_data {
 	u8 addr;
 	u8 data;
 };

 /**
  * struct max8997_muic_platform_data
  * @init_data: array of max8997_muic_reg_data
  *	       used for initializing registers of MAX8997 MUIC device
  * @num_init_data: array size of init_data
  */
 struct max8997_muic_platform_data {
 	struct max8997_muic_reg_data *init_data;
 	int num_init_data;

 	/* Check cable state after certain delay */
 	int detcable_delay_ms;

 	/*
 	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
 	 * h/w path of COMP2/COMN1 on CONTROL1 register.
 	 */
 	int path_usb;
 	int path_uart;
 };

 enum max8997_haptic_motor_type {
 	MAX8997_HAPTIC_ERM,
 	MAX8997_HAPTIC_LRA,
 };

 enum max8997_haptic_pulse_mode {
 	MAX8997_EXTERNAL_MODE,
 	MAX8997_INTERNAL_MODE,
 };

 enum max8997_haptic_pwm_divisor {
 	MAX8997_PWM_DIVISOR_32,
 	MAX8997_PWM_DIVISOR_64,
 	MAX8997_PWM_DIVISOR_128,
 	MAX8997_PWM_DIVISOR_256,
 };

 /**
  * max8997_haptic_platform_data
  * @pwm_channel_id: channel number of PWM device
  *		    valid for MAX8997_EXTERNAL_MODE
  * @pwm_period: period in nano second for PWM device
  *		valid for MAX8997_EXTERNAL_MODE
  * @type: motor type
  * @mode: pulse mode
  *     MAX8997_EXTERNAL_MODE: external PWM device is used to control motor
  *     MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor
  * @pwm_divisor: divisor for external PWM device
  * @internal_mode_pattern: internal mode pattern for internal mode
  *     [0 - 3]: valid pattern number
  * @pattern_cycle: the number of cycles of the waveform
  *		   for the internal mode pattern
  *     [0 - 15]: available cycles
  * @pattern_signal_period: period of the waveform for the internal mode pattern
  *     [0 - 255]: available period
  */
 struct max8997_haptic_platform_data {
 	unsigned int pwm_channel_id;
 	unsigned int pwm_period;

 	enum max8997_haptic_motor_type type;
 	enum max8997_haptic_pulse_mode mode;
 	enum max8997_haptic_pwm_divisor pwm_divisor;

 	unsigned int internal_mode_pattern;
 	unsigned int pattern_cycle;
 	unsigned int pattern_signal_period;
 };

 enum max8997_led_mode {
 	MAX8997_NONE,
 	MAX8997_FLASH_MODE,
 	MAX8997_MOVIE_MODE,
 	MAX8997_FLASH_PIN_CONTROL_MODE,
 	MAX8997_MOVIE_PIN_CONTROL_MODE,
 };

 /**
  *  struct max8997_led_platform_data
  *  The number of LED devices for MAX8997 is two
  *  @mode: LED mode for each LED device
  *  @brightness: initial brightness for each LED device
  *	range:
  *	[0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE
  *	[0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE
  */
 struct max8997_led_platform_data {
 	enum max8997_led_mode mode[2];
 	u8 brightness[2];
 };

 struct max8997_platform_data {
 	/* IRQ */
 	int ono;

 	/* ---- PMIC ---- */
 	struct max8997_regulator_data *regulators;
 	int num_regulators;

 	/*
 	 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
 	 * With buckx_gpiodvs enabled, the buckx cannot be controlled
 	 * independently. To control buckx (of 1, 2, and 5) independently,
 	 * disable buckx_gpiodvs and control with BUCKxDVS1 register.
 	 *
 	 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
 	 * on buckx will change the voltage of bucky at the same time.
 	 *
 	 */
 	bool ignore_gpiodvs_side_effect;
 	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
 	int buck125_default_idx; /* Default value of SET1, 2, 3 */
 	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
 	bool buck1_gpiodvs;
 	unsigned int buck2_voltage[8];
 	bool buck2_gpiodvs;
 	unsigned int buck5_voltage[8];
 	bool buck5_gpiodvs;

 	/* ---- Charger control ---- */
 	/* eoc stands for 'end of charge' */
 	int eoc_mA; /* 50 ~ 200mA by 10mA step */
 	/* charge Full Timeout */
 	int timeout; /* 0 (no timeout), 5, 6, 7 hours */

 	/* ---- MUIC ---- */
 	struct max8997_muic_platform_data *muic_pdata;

 	/* ---- HAPTIC ---- */
 	struct max8997_haptic_platform_data *haptic_pdata;

 	/* RTC: Not implemented */
 	/* ---- LED ---- */
 	struct max8997_led_platform_data *led_pdata;
 };

 #endif /* __LINUX_MFD_MAX8998_H */
	/*
	* max8997.h - Driver for the Maxim 8997/8966
	*
	* Copyright (C) 2009-2010 Samsung Electrnoics
	* MyungJoo Ham <myungjoo.ham@samsung.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	* This driver is based on max8998.h
	*
	* MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
	* Except Fuel Gauge, every device shares the same I2C bus and included in
	* this mfd driver. Although the fuel gauge is included in the chip, it is
	* excluded from the driver because a) it has a different I2C bus from
	* others and b) it can be enabled simply by using MAX17042 driver.
	*/

	#ifndef __LINUX_MFD_MAX8998_H
	#define __LINUX_MFD_MAX8998_H

	#include <linux/regulator/consumer.h>

	/* MAX8997/8966 regulator IDs */
	enum max8998_regulators {
	MAX8997_LDO1 = 0,
	MAX8997_LDO2,
	MAX8997_LDO3,
	MAX8997_LDO4,
	MAX8997_LDO5,
	MAX8997_LDO6,
	MAX8997_LDO7,
	MAX8997_LDO8,
	MAX8997_LDO9,
	MAX8997_LDO10,
	MAX8997_LDO11,
	MAX8997_LDO12,
	MAX8997_LDO13,
	MAX8997_LDO14,
	MAX8997_LDO15,
	MAX8997_LDO16,
	MAX8997_LDO17,
	MAX8997_LDO18,
	MAX8997_LDO21,
	MAX8997_BUCK1,
	MAX8997_BUCK2,
	MAX8997_BUCK3,
	MAX8997_BUCK4,
	MAX8997_BUCK5,
	MAX8997_BUCK6,
	MAX8997_BUCK7,
	MAX8997_EN32KHZ_AP,
	MAX8997_EN32KHZ_CP,
	MAX8997_ENVICHG,
	MAX8997_ESAFEOUT1,
	MAX8997_ESAFEOUT2,
	MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
	MAX8997_CHARGER, /* charger current, MBCCTRL4 */
	MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */

	MAX8997_REG_MAX,
	};

	struct max8997_regulator_data {
	int id;
	struct regulator_init_data *initdata;
	struct device_node *reg_node;
	};

	struct max8997_muic_reg_data {
	u8 addr;
	u8 data;
	};

	/**
	* struct max8997_muic_platform_data
	* @init_data: array of max8997_muic_reg_data
	* used for initializing registers of MAX8997 MUIC device
	* @num_init_data: array size of init_data
	*/
	struct max8997_muic_platform_data {
	struct max8997_muic_reg_data *init_data;
	int num_init_data;

	/* Check cable state after certain delay */
	int detcable_delay_ms;

	/*
	* Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
	* h/w path of COMP2/COMN1 on CONTROL1 register.
	*/
	int path_usb;
	int path_uart;
	};

	enum max8997_haptic_motor_type {
	MAX8997_HAPTIC_ERM,
	MAX8997_HAPTIC_LRA,
	};

	enum max8997_haptic_pulse_mode {
	MAX8997_EXTERNAL_MODE,
	MAX8997_INTERNAL_MODE,
	};

	enum max8997_haptic_pwm_divisor {
	MAX8997_PWM_DIVISOR_32,
	MAX8997_PWM_DIVISOR_64,
	MAX8997_PWM_DIVISOR_128,
	MAX8997_PWM_DIVISOR_256,
	};

	/**
	* max8997_haptic_platform_data
	* @pwm_channel_id: channel number of PWM device
	* valid for MAX8997_EXTERNAL_MODE
	* @pwm_period: period in nano second for PWM device
	* valid for MAX8997_EXTERNAL_MODE
	* @type: motor type
	* @mode: pulse mode
	* MAX8997_EXTERNAL_MODE: external PWM device is used to control motor
	* MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor
	* @pwm_divisor: divisor for external PWM device
	* @internal_mode_pattern: internal mode pattern for internal mode
	* [0 - 3]: valid pattern number
	* @pattern_cycle: the number of cycles of the waveform
	* for the internal mode pattern
	* [0 - 15]: available cycles
	* @pattern_signal_period: period of the waveform for the internal mode pattern
	* [0 - 255]: available period
	*/
	struct max8997_haptic_platform_data {
	unsigned int pwm_channel_id;
	unsigned int pwm_period;

	enum max8997_haptic_motor_type type;
	enum max8997_haptic_pulse_mode mode;
	enum max8997_haptic_pwm_divisor pwm_divisor;

	unsigned int internal_mode_pattern;
	unsigned int pattern_cycle;
	unsigned int pattern_signal_period;
	};

	enum max8997_led_mode {
	MAX8997_NONE,
	MAX8997_FLASH_MODE,
	MAX8997_MOVIE_MODE,
	MAX8997_FLASH_PIN_CONTROL_MODE,
	MAX8997_MOVIE_PIN_CONTROL_MODE,
	};

	/**
	* struct max8997_led_platform_data
	* The number of LED devices for MAX8997 is two
	* @mode: LED mode for each LED device
	* @brightness: initial brightness for each LED device
	* range:
	* [0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE
	* [0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE
	*/
	struct max8997_led_platform_data {
	enum max8997_led_mode mode[2];
	u8 brightness[2];
	};

	struct max8997_platform_data {
	/* IRQ */
	int ono;

	/* ---- PMIC ---- */
	struct max8997_regulator_data *regulators;
	int num_regulators;

	/*
	* SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
	* With buckx_gpiodvs enabled, the buckx cannot be controlled
	* independently. To control buckx (of 1, 2, and 5) independently,
	* disable buckx_gpiodvs and control with BUCKxDVS1 register.
	*
	* When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
	* on buckx will change the voltage of bucky at the same time.
	*
	*/
	bool ignore_gpiodvs_side_effect;
	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
	int buck125_default_idx; /* Default value of SET1, 2, 3 */
	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
	bool buck1_gpiodvs;
	unsigned int buck2_voltage[8];
	bool buck2_gpiodvs;
	unsigned int buck5_voltage[8];
	bool buck5_gpiodvs;

	/* ---- Charger control ---- */
	/* eoc stands for 'end of charge' */
	int eoc_mA; /* 50 ~ 200mA by 10mA step */
	/* charge Full Timeout */
	int timeout; /* 0 (no timeout), 5, 6, 7 hours */

	/* ---- MUIC ---- */
	struct max8997_muic_platform_data *muic_pdata;

	/* ---- HAPTIC ---- */
	struct max8997_haptic_platform_data *haptic_pdata;

	/* RTC: Not implemented */
	/* ---- LED ---- */
	struct max8997_led_platform_data *led_pdata;
	};

	#endif /* __LINUX_MFD_MAX8998_H */