| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Performance event support for s390x - CPU-measurement Counter Facility |
| * |
| * Copyright IBM Corp. 2012, 2017 |
| * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> |
| */ |
| #define KMSG_COMPONENT "cpum_cf" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/perf_event.h> |
| #include <linux/percpu.h> |
| #include <linux/notifier.h> |
| #include <linux/init.h> |
| #include <linux/export.h> |
| #include <asm/ctl_reg.h> |
| #include <asm/irq.h> |
| #include <asm/cpu_mf.h> |
| |
| enum cpumf_ctr_set { |
| CPUMF_CTR_SET_BASIC = 0, /* Basic Counter Set */ |
| CPUMF_CTR_SET_USER = 1, /* Problem-State Counter Set */ |
| CPUMF_CTR_SET_CRYPTO = 2, /* Crypto-Activity Counter Set */ |
| CPUMF_CTR_SET_EXT = 3, /* Extended Counter Set */ |
| CPUMF_CTR_SET_MT_DIAG = 4, /* MT-diagnostic Counter Set */ |
| |
| /* Maximum number of counter sets */ |
| CPUMF_CTR_SET_MAX, |
| }; |
| |
| #define CPUMF_LCCTL_ENABLE_SHIFT 16 |
| #define CPUMF_LCCTL_ACTCTL_SHIFT 0 |
| static const u64 cpumf_state_ctl[CPUMF_CTR_SET_MAX] = { |
| [CPUMF_CTR_SET_BASIC] = 0x02, |
| [CPUMF_CTR_SET_USER] = 0x04, |
| [CPUMF_CTR_SET_CRYPTO] = 0x08, |
| [CPUMF_CTR_SET_EXT] = 0x01, |
| [CPUMF_CTR_SET_MT_DIAG] = 0x20, |
| }; |
| |
| static void ctr_set_enable(u64 *state, int ctr_set) |
| { |
| *state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT; |
| } |
| static void ctr_set_disable(u64 *state, int ctr_set) |
| { |
| *state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT); |
| } |
| static void ctr_set_start(u64 *state, int ctr_set) |
| { |
| *state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT; |
| } |
| static void ctr_set_stop(u64 *state, int ctr_set) |
| { |
| *state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT); |
| } |
| |
| /* Local CPUMF event structure */ |
| struct cpu_hw_events { |
| struct cpumf_ctr_info info; |
| atomic_t ctr_set[CPUMF_CTR_SET_MAX]; |
| u64 state, tx_state; |
| unsigned int flags; |
| unsigned int txn_flags; |
| }; |
| static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { |
| .ctr_set = { |
| [CPUMF_CTR_SET_BASIC] = ATOMIC_INIT(0), |
| [CPUMF_CTR_SET_USER] = ATOMIC_INIT(0), |
| [CPUMF_CTR_SET_CRYPTO] = ATOMIC_INIT(0), |
| [CPUMF_CTR_SET_EXT] = ATOMIC_INIT(0), |
| [CPUMF_CTR_SET_MT_DIAG] = ATOMIC_INIT(0), |
| }, |
| .state = 0, |
| .flags = 0, |
| .txn_flags = 0, |
| }; |
| |
| static enum cpumf_ctr_set get_counter_set(u64 event) |
| { |
| int set = CPUMF_CTR_SET_MAX; |
| |
| if (event < 32) |
| set = CPUMF_CTR_SET_BASIC; |
| else if (event < 64) |
| set = CPUMF_CTR_SET_USER; |
| else if (event < 128) |
| set = CPUMF_CTR_SET_CRYPTO; |
| else if (event < 256) |
| set = CPUMF_CTR_SET_EXT; |
| else if (event >= 448 && event < 496) |
| set = CPUMF_CTR_SET_MT_DIAG; |
| |
| return set; |
| } |
| |
| static int validate_ctr_version(const struct hw_perf_event *hwc) |
| { |
| struct cpu_hw_events *cpuhw; |
| int err = 0; |
| u16 mtdiag_ctl; |
| |
| cpuhw = &get_cpu_var(cpu_hw_events); |
| |
| /* check required version for counter sets */ |
| switch (hwc->config_base) { |
| case CPUMF_CTR_SET_BASIC: |
| case CPUMF_CTR_SET_USER: |
| if (cpuhw->info.cfvn < 1) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_CRYPTO: |
| case CPUMF_CTR_SET_EXT: |
| if (cpuhw->info.csvn < 1) |
| err = -EOPNOTSUPP; |
| if ((cpuhw->info.csvn == 1 && hwc->config > 159) || |
| (cpuhw->info.csvn == 2 && hwc->config > 175) || |
| (cpuhw->info.csvn > 2 && hwc->config > 255)) |
| err = -EOPNOTSUPP; |
| break; |
| case CPUMF_CTR_SET_MT_DIAG: |
| if (cpuhw->info.csvn <= 3) |
| err = -EOPNOTSUPP; |
| /* |
| * MT-diagnostic counters are read-only. The counter set |
| * is automatically enabled and activated on all CPUs with |
| * multithreading (SMT). Deactivation of multithreading |
| * also disables the counter set. State changes are ignored |
| * by lcctl(). Because Linux controls SMT enablement through |
| * a kernel parameter only, the counter set is either disabled |
| * or enabled and active. |
| * |
| * Thus, the counters can only be used if SMT is on and the |
| * counter set is enabled and active. |
| */ |
| mtdiag_ctl = cpumf_state_ctl[CPUMF_CTR_SET_MT_DIAG]; |
| if (!((cpuhw->info.auth_ctl & mtdiag_ctl) && |
| (cpuhw->info.enable_ctl & mtdiag_ctl) && |
| (cpuhw->info.act_ctl & mtdiag_ctl))) |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| put_cpu_var(cpu_hw_events); |
| return err; |
| } |
| |
| static int validate_ctr_auth(const struct hw_perf_event *hwc) |
| { |
| struct cpu_hw_events *cpuhw; |
| u64 ctrs_state; |
| int err = 0; |
| |
| cpuhw = &get_cpu_var(cpu_hw_events); |
| |
| /* Check authorization for cpu counter sets. |
| * If the particular CPU counter set is not authorized, |
| * return with -ENOENT in order to fall back to other |
| * PMUs that might suffice the event request. |
| */ |
| ctrs_state = cpumf_state_ctl[hwc->config_base]; |
| if (!(ctrs_state & cpuhw->info.auth_ctl)) |
| err = -ENOENT; |
| |
| put_cpu_var(cpu_hw_events); |
| return err; |
| } |
| |
| /* |
| * Change the CPUMF state to active. |
| * Enable and activate the CPU-counter sets according |
| * to the per-cpu control state. |
| */ |
| static void cpumf_pmu_enable(struct pmu *pmu) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| int err; |
| |
| if (cpuhw->flags & PMU_F_ENABLED) |
| return; |
| |
| err = lcctl(cpuhw->state); |
| if (err) { |
| pr_err("Enabling the performance measuring unit " |
| "failed with rc=%x\n", err); |
| return; |
| } |
| |
| cpuhw->flags |= PMU_F_ENABLED; |
| } |
| |
| /* |
| * Change the CPUMF state to inactive. |
| * Disable and enable (inactive) the CPU-counter sets according |
| * to the per-cpu control state. |
| */ |
| static void cpumf_pmu_disable(struct pmu *pmu) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| int err; |
| u64 inactive; |
| |
| if (!(cpuhw->flags & PMU_F_ENABLED)) |
| return; |
| |
| inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1); |
| err = lcctl(inactive); |
| if (err) { |
| pr_err("Disabling the performance measuring unit " |
| "failed with rc=%x\n", err); |
| return; |
| } |
| |
| cpuhw->flags &= ~PMU_F_ENABLED; |
| } |
| |
| |
| /* Number of perf events counting hardware events */ |
| static atomic_t num_events = ATOMIC_INIT(0); |
| /* Used to avoid races in calling reserve/release_cpumf_hardware */ |
| static DEFINE_MUTEX(pmc_reserve_mutex); |
| |
| /* CPU-measurement alerts for the counter facility */ |
| static void cpumf_measurement_alert(struct ext_code ext_code, |
| unsigned int alert, unsigned long unused) |
| { |
| struct cpu_hw_events *cpuhw; |
| |
| if (!(alert & CPU_MF_INT_CF_MASK)) |
| return; |
| |
| inc_irq_stat(IRQEXT_CMC); |
| cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| /* Measurement alerts are shared and might happen when the PMU |
| * is not reserved. Ignore these alerts in this case. */ |
| if (!(cpuhw->flags & PMU_F_RESERVED)) |
| return; |
| |
| /* counter authorization change alert */ |
| if (alert & CPU_MF_INT_CF_CACA) |
| qctri(&cpuhw->info); |
| |
| /* loss of counter data alert */ |
| if (alert & CPU_MF_INT_CF_LCDA) |
| pr_err("CPU[%i] Counter data was lost\n", smp_processor_id()); |
| |
| /* loss of MT counter data alert */ |
| if (alert & CPU_MF_INT_CF_MTDA) |
| pr_warn("CPU[%i] MT counter data was lost\n", |
| smp_processor_id()); |
| } |
| |
| #define PMC_INIT 0 |
| #define PMC_RELEASE 1 |
| static void setup_pmc_cpu(void *flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| switch (*((int *) flags)) { |
| case PMC_INIT: |
| memset(&cpuhw->info, 0, sizeof(cpuhw->info)); |
| qctri(&cpuhw->info); |
| cpuhw->flags |= PMU_F_RESERVED; |
| break; |
| |
| case PMC_RELEASE: |
| cpuhw->flags &= ~PMU_F_RESERVED; |
| break; |
| } |
| |
| /* Disable CPU counter sets */ |
| lcctl(0); |
| } |
| |
| /* Initialize the CPU-measurement facility */ |
| static int reserve_pmc_hardware(void) |
| { |
| int flags = PMC_INIT; |
| |
| on_each_cpu(setup_pmc_cpu, &flags, 1); |
| irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT); |
| |
| return 0; |
| } |
| |
| /* Release the CPU-measurement facility */ |
| static void release_pmc_hardware(void) |
| { |
| int flags = PMC_RELEASE; |
| |
| on_each_cpu(setup_pmc_cpu, &flags, 1); |
| irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT); |
| } |
| |
| /* Release the PMU if event is the last perf event */ |
| static void hw_perf_event_destroy(struct perf_event *event) |
| { |
| if (!atomic_add_unless(&num_events, -1, 1)) { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_dec_return(&num_events) == 0) |
| release_pmc_hardware(); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| } |
| |
| /* CPUMF <-> perf event mappings for kernel+userspace (basic set) */ |
| static const int cpumf_generic_events_basic[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = 0, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 1, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = -1, |
| [PERF_COUNT_HW_CACHE_MISSES] = -1, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1, |
| [PERF_COUNT_HW_BRANCH_MISSES] = -1, |
| [PERF_COUNT_HW_BUS_CYCLES] = -1, |
| }; |
| /* CPUMF <-> perf event mappings for userspace (problem-state set) */ |
| static const int cpumf_generic_events_user[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = 32, |
| [PERF_COUNT_HW_INSTRUCTIONS] = 33, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = -1, |
| [PERF_COUNT_HW_CACHE_MISSES] = -1, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1, |
| [PERF_COUNT_HW_BRANCH_MISSES] = -1, |
| [PERF_COUNT_HW_BUS_CYCLES] = -1, |
| }; |
| |
| static int __hw_perf_event_init(struct perf_event *event) |
| { |
| struct perf_event_attr *attr = &event->attr; |
| struct hw_perf_event *hwc = &event->hw; |
| enum cpumf_ctr_set set; |
| int err; |
| u64 ev; |
| |
| switch (attr->type) { |
| case PERF_TYPE_RAW: |
| /* Raw events are used to access counters directly, |
| * hence do not permit excludes */ |
| if (attr->exclude_kernel || attr->exclude_user || |
| attr->exclude_hv) |
| return -EOPNOTSUPP; |
| ev = attr->config; |
| break; |
| |
| case PERF_TYPE_HARDWARE: |
| if (is_sampling_event(event)) /* No sampling support */ |
| return -ENOENT; |
| ev = attr->config; |
| /* Count user space (problem-state) only */ |
| if (!attr->exclude_user && attr->exclude_kernel) { |
| if (ev >= ARRAY_SIZE(cpumf_generic_events_user)) |
| return -EOPNOTSUPP; |
| ev = cpumf_generic_events_user[ev]; |
| |
| /* No support for kernel space counters only */ |
| } else if (!attr->exclude_kernel && attr->exclude_user) { |
| return -EOPNOTSUPP; |
| |
| /* Count user and kernel space */ |
| } else { |
| if (ev >= ARRAY_SIZE(cpumf_generic_events_basic)) |
| return -EOPNOTSUPP; |
| ev = cpumf_generic_events_basic[ev]; |
| } |
| break; |
| |
| default: |
| return -ENOENT; |
| } |
| |
| if (ev == -1) |
| return -ENOENT; |
| |
| if (ev > PERF_CPUM_CF_MAX_CTR) |
| return -ENOENT; |
| |
| /* Obtain the counter set to which the specified counter belongs */ |
| set = get_counter_set(ev); |
| switch (set) { |
| case CPUMF_CTR_SET_BASIC: |
| case CPUMF_CTR_SET_USER: |
| case CPUMF_CTR_SET_CRYPTO: |
| case CPUMF_CTR_SET_EXT: |
| case CPUMF_CTR_SET_MT_DIAG: |
| /* |
| * Use the hardware perf event structure to store the |
| * counter number in the 'config' member and the counter |
| * set number in the 'config_base'. The counter set number |
| * is then later used to enable/disable the counter(s). |
| */ |
| hwc->config = ev; |
| hwc->config_base = set; |
| break; |
| case CPUMF_CTR_SET_MAX: |
| /* The counter could not be associated to a counter set */ |
| return -EINVAL; |
| }; |
| |
| /* Initialize for using the CPU-measurement counter facility */ |
| if (!atomic_inc_not_zero(&num_events)) { |
| mutex_lock(&pmc_reserve_mutex); |
| if (atomic_read(&num_events) == 0 && reserve_pmc_hardware()) |
| err = -EBUSY; |
| else |
| atomic_inc(&num_events); |
| mutex_unlock(&pmc_reserve_mutex); |
| } |
| event->destroy = hw_perf_event_destroy; |
| |
| /* Finally, validate version and authorization of the counter set */ |
| err = validate_ctr_auth(hwc); |
| if (!err) |
| err = validate_ctr_version(hwc); |
| |
| return err; |
| } |
| |
| static int cpumf_pmu_event_init(struct perf_event *event) |
| { |
| int err; |
| |
| switch (event->attr.type) { |
| case PERF_TYPE_HARDWARE: |
| case PERF_TYPE_HW_CACHE: |
| case PERF_TYPE_RAW: |
| err = __hw_perf_event_init(event); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| if (unlikely(err) && event->destroy) |
| event->destroy(event); |
| |
| return err; |
| } |
| |
| static int hw_perf_event_reset(struct perf_event *event) |
| { |
| u64 prev, new; |
| int err; |
| |
| do { |
| prev = local64_read(&event->hw.prev_count); |
| err = ecctr(event->hw.config, &new); |
| if (err) { |
| if (err != 3) |
| break; |
| /* The counter is not (yet) available. This |
| * might happen if the counter set to which |
| * this counter belongs is in the disabled |
| * state. |
| */ |
| new = 0; |
| } |
| } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev); |
| |
| return err; |
| } |
| |
| static void hw_perf_event_update(struct perf_event *event) |
| { |
| u64 prev, new, delta; |
| int err; |
| |
| do { |
| prev = local64_read(&event->hw.prev_count); |
| err = ecctr(event->hw.config, &new); |
| if (err) |
| return; |
| } while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev); |
| |
| delta = (prev <= new) ? new - prev |
| : (-1ULL - prev) + new + 1; /* overflow */ |
| local64_add(delta, &event->count); |
| } |
| |
| static void cpumf_pmu_read(struct perf_event *event) |
| { |
| if (event->hw.state & PERF_HES_STOPPED) |
| return; |
| |
| hw_perf_event_update(event); |
| } |
| |
| static void cpumf_pmu_start(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| |
| if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED))) |
| return; |
| |
| if (WARN_ON_ONCE(hwc->config == -1)) |
| return; |
| |
| if (flags & PERF_EF_RELOAD) |
| WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); |
| |
| hwc->state = 0; |
| |
| /* (Re-)enable and activate the counter set */ |
| ctr_set_enable(&cpuhw->state, hwc->config_base); |
| ctr_set_start(&cpuhw->state, hwc->config_base); |
| |
| /* The counter set to which this counter belongs can be already active. |
| * Because all counters in a set are active, the event->hw.prev_count |
| * needs to be synchronized. At this point, the counter set can be in |
| * the inactive or disabled state. |
| */ |
| hw_perf_event_reset(event); |
| |
| /* increment refcount for this counter set */ |
| atomic_inc(&cpuhw->ctr_set[hwc->config_base]); |
| } |
| |
| static void cpumf_pmu_stop(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| |
| if (!(hwc->state & PERF_HES_STOPPED)) { |
| /* Decrement reference count for this counter set and if this |
| * is the last used counter in the set, clear activation |
| * control and set the counter set state to inactive. |
| */ |
| if (!atomic_dec_return(&cpuhw->ctr_set[hwc->config_base])) |
| ctr_set_stop(&cpuhw->state, hwc->config_base); |
| event->hw.state |= PERF_HES_STOPPED; |
| } |
| |
| if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) { |
| hw_perf_event_update(event); |
| event->hw.state |= PERF_HES_UPTODATE; |
| } |
| } |
| |
| static int cpumf_pmu_add(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| /* Check authorization for the counter set to which this |
| * counter belongs. |
| * For group events transaction, the authorization check is |
| * done in cpumf_pmu_commit_txn(). |
| */ |
| if (!(cpuhw->txn_flags & PERF_PMU_TXN_ADD)) |
| if (validate_ctr_auth(&event->hw)) |
| return -ENOENT; |
| |
| ctr_set_enable(&cpuhw->state, event->hw.config_base); |
| event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; |
| |
| if (flags & PERF_EF_START) |
| cpumf_pmu_start(event, PERF_EF_RELOAD); |
| |
| perf_event_update_userpage(event); |
| |
| return 0; |
| } |
| |
| static void cpumf_pmu_del(struct perf_event *event, int flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| cpumf_pmu_stop(event, PERF_EF_UPDATE); |
| |
| /* Check if any counter in the counter set is still used. If not used, |
| * change the counter set to the disabled state. This also clears the |
| * content of all counters in the set. |
| * |
| * When a new perf event has been added but not yet started, this can |
| * clear enable control and resets all counters in a set. Therefore, |
| * cpumf_pmu_start() always has to reenable a counter set. |
| */ |
| if (!atomic_read(&cpuhw->ctr_set[event->hw.config_base])) |
| ctr_set_disable(&cpuhw->state, event->hw.config_base); |
| |
| perf_event_update_userpage(event); |
| } |
| |
| /* |
| * Start group events scheduling transaction. |
| * Set flags to perform a single test at commit time. |
| * |
| * We only support PERF_PMU_TXN_ADD transactions. Save the |
| * transaction flags but otherwise ignore non-PERF_PMU_TXN_ADD |
| * transactions. |
| */ |
| static void cpumf_pmu_start_txn(struct pmu *pmu, unsigned int txn_flags) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| WARN_ON_ONCE(cpuhw->txn_flags); /* txn already in flight */ |
| |
| cpuhw->txn_flags = txn_flags; |
| if (txn_flags & ~PERF_PMU_TXN_ADD) |
| return; |
| |
| perf_pmu_disable(pmu); |
| cpuhw->tx_state = cpuhw->state; |
| } |
| |
| /* |
| * Stop and cancel a group events scheduling tranctions. |
| * Assumes cpumf_pmu_del() is called for each successful added |
| * cpumf_pmu_add() during the transaction. |
| */ |
| static void cpumf_pmu_cancel_txn(struct pmu *pmu) |
| { |
| unsigned int txn_flags; |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| |
| WARN_ON_ONCE(!cpuhw->txn_flags); /* no txn in flight */ |
| |
| txn_flags = cpuhw->txn_flags; |
| cpuhw->txn_flags = 0; |
| if (txn_flags & ~PERF_PMU_TXN_ADD) |
| return; |
| |
| WARN_ON(cpuhw->tx_state != cpuhw->state); |
| |
| perf_pmu_enable(pmu); |
| } |
| |
| /* |
| * Commit the group events scheduling transaction. On success, the |
| * transaction is closed. On error, the transaction is kept open |
| * until cpumf_pmu_cancel_txn() is called. |
| */ |
| static int cpumf_pmu_commit_txn(struct pmu *pmu) |
| { |
| struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events); |
| u64 state; |
| |
| WARN_ON_ONCE(!cpuhw->txn_flags); /* no txn in flight */ |
| |
| if (cpuhw->txn_flags & ~PERF_PMU_TXN_ADD) { |
| cpuhw->txn_flags = 0; |
| return 0; |
| } |
| |
| /* check if the updated state can be scheduled */ |
| state = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1); |
| state >>= CPUMF_LCCTL_ENABLE_SHIFT; |
| if ((state & cpuhw->info.auth_ctl) != state) |
| return -ENOENT; |
| |
| cpuhw->txn_flags = 0; |
| perf_pmu_enable(pmu); |
| return 0; |
| } |
| |
| /* Performance monitoring unit for s390x */ |
| static struct pmu cpumf_pmu = { |
| .task_ctx_nr = perf_sw_context, |
| .capabilities = PERF_PMU_CAP_NO_INTERRUPT, |
| .pmu_enable = cpumf_pmu_enable, |
| .pmu_disable = cpumf_pmu_disable, |
| .event_init = cpumf_pmu_event_init, |
| .add = cpumf_pmu_add, |
| .del = cpumf_pmu_del, |
| .start = cpumf_pmu_start, |
| .stop = cpumf_pmu_stop, |
| .read = cpumf_pmu_read, |
| .start_txn = cpumf_pmu_start_txn, |
| .commit_txn = cpumf_pmu_commit_txn, |
| .cancel_txn = cpumf_pmu_cancel_txn, |
| }; |
| |
| static int cpumf_pmf_setup(unsigned int cpu, int flags) |
| { |
| local_irq_disable(); |
| setup_pmc_cpu(&flags); |
| local_irq_enable(); |
| return 0; |
| } |
| |
| static int s390_pmu_online_cpu(unsigned int cpu) |
| { |
| return cpumf_pmf_setup(cpu, PMC_INIT); |
| } |
| |
| static int s390_pmu_offline_cpu(unsigned int cpu) |
| { |
| return cpumf_pmf_setup(cpu, PMC_RELEASE); |
| } |
| |
| static int __init cpumf_pmu_init(void) |
| { |
| int rc; |
| |
| if (!cpum_cf_avail()) |
| return -ENODEV; |
| |
| /* clear bit 15 of cr0 to unauthorize problem-state to |
| * extract measurement counters */ |
| ctl_clear_bit(0, 48); |
| |
| /* register handler for measurement-alert interruptions */ |
| rc = register_external_irq(EXT_IRQ_MEASURE_ALERT, |
| cpumf_measurement_alert); |
| if (rc) { |
| pr_err("Registering for CPU-measurement alerts " |
| "failed with rc=%i\n", rc); |
| return rc; |
| } |
| |
| cpumf_pmu.attr_groups = cpumf_cf_event_group(); |
| rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", PERF_TYPE_RAW); |
| if (rc) { |
| pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc); |
| unregister_external_irq(EXT_IRQ_MEASURE_ALERT, |
| cpumf_measurement_alert); |
| return rc; |
| } |
| return cpuhp_setup_state(CPUHP_AP_PERF_S390_CF_ONLINE, |
| "perf/s390/cf:online", |
| s390_pmu_online_cpu, s390_pmu_offline_cpu); |
| } |
| early_initcall(cpumf_pmu_init); |