| /* | |
| * platinumfb.c -- frame buffer device for the PowerMac 'platinum' display | |
| * | |
| * Copyright (C) 1998 Franz Sirl | |
| * | |
| * Frame buffer structure from: | |
| * drivers/video/controlfb.c -- frame buffer device for | |
| * Apple 'control' display chip. | |
| * Copyright (C) 1998 Dan Jacobowitz | |
| * | |
| * Hardware information from: | |
| * platinum.c: Console support for PowerMac "platinum" display adaptor. | |
| * Copyright (C) 1996 Paul Mackerras and Mark Abene | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| */ | |
| #undef DEBUG | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/mm.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/fb.h> | |
| #include <linux/init.h> | |
| #include <linux/nvram.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_platform.h> | |
| #include <asm/io.h> | |
| #include <asm/prom.h> | |
| #include <asm/pgtable.h> | |
| #include "macmodes.h" | |
| #include "platinumfb.h" | |
| static int default_vmode = VMODE_NVRAM; | |
| static int default_cmode = CMODE_NVRAM; | |
| struct fb_info_platinum { | |
| struct fb_info *info; | |
| int vmode, cmode; | |
| int xres, yres; | |
| int vxres, vyres; | |
| int xoffset, yoffset; | |
| struct { | |
| __u8 red, green, blue; | |
| } palette[256]; | |
| u32 pseudo_palette[16]; | |
| volatile struct cmap_regs __iomem *cmap_regs; | |
| unsigned long cmap_regs_phys; | |
| volatile struct platinum_regs __iomem *platinum_regs; | |
| unsigned long platinum_regs_phys; | |
| __u8 __iomem *frame_buffer; | |
| volatile __u8 __iomem *base_frame_buffer; | |
| unsigned long frame_buffer_phys; | |
| unsigned long total_vram; | |
| int clktype; | |
| int dactype; | |
| struct resource rsrc_fb, rsrc_reg; | |
| }; | |
| /* | |
| * Frame buffer device API | |
| */ | |
| static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info); | |
| static int platinumfb_blank(int blank_mode, struct fb_info *info); | |
| static int platinumfb_set_par (struct fb_info *info); | |
| static int platinumfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info); | |
| /* | |
| * internal functions | |
| */ | |
| static inline int platinum_vram_reqd(int video_mode, int color_mode); | |
| static int read_platinum_sense(struct fb_info_platinum *pinfo); | |
| static void set_platinum_clock(struct fb_info_platinum *pinfo); | |
| static void platinum_set_hardware(struct fb_info_platinum *pinfo); | |
| static int platinum_var_to_par(struct fb_var_screeninfo *var, | |
| struct fb_info_platinum *pinfo, | |
| int check_only); | |
| /* | |
| * Interface used by the world | |
| */ | |
| static struct fb_ops platinumfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = platinumfb_check_var, | |
| .fb_set_par = platinumfb_set_par, | |
| .fb_setcolreg = platinumfb_setcolreg, | |
| .fb_blank = platinumfb_blank, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| }; | |
| /* | |
| * Checks a var structure | |
| */ | |
| static int platinumfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| return platinum_var_to_par(var, info->par, 1); | |
| } | |
| /* | |
| * Applies current var to display | |
| */ | |
| static int platinumfb_set_par (struct fb_info *info) | |
| { | |
| struct fb_info_platinum *pinfo = info->par; | |
| struct platinum_regvals *init; | |
| int err, offset = 0x20; | |
| if((err = platinum_var_to_par(&info->var, pinfo, 0))) { | |
| printk (KERN_ERR "platinumfb_set_par: error calling" | |
| " platinum_var_to_par: %d.\n", err); | |
| return err; | |
| } | |
| platinum_set_hardware(pinfo); | |
| init = platinum_reg_init[pinfo->vmode-1]; | |
| if ((pinfo->vmode == VMODE_832_624_75) && (pinfo->cmode > CMODE_8)) | |
| offset = 0x10; | |
| info->screen_base = pinfo->frame_buffer + init->fb_offset + offset; | |
| mutex_lock(&info->mm_lock); | |
| info->fix.smem_start = (pinfo->frame_buffer_phys) + init->fb_offset + offset; | |
| mutex_unlock(&info->mm_lock); | |
| info->fix.visual = (pinfo->cmode == CMODE_8) ? | |
| FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; | |
| info->fix.line_length = vmode_attrs[pinfo->vmode-1].hres * (1<<pinfo->cmode) | |
| + offset; | |
| printk("line_length: %x\n", info->fix.line_length); | |
| return 0; | |
| } | |
| static int platinumfb_blank(int blank, struct fb_info *fb) | |
| { | |
| /* | |
| * Blank the screen if blank_mode != 0, else unblank. If blank == NULL | |
| * then the caller blanks by setting the CLUT (Color Look Up Table) to all | |
| * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due | |
| * to e.g. a video mode which doesn't support it. Implements VESA suspend | |
| * and powerdown modes on hardware that supports disabling hsync/vsync: | |
| * blank_mode == 2: suspend vsync | |
| * blank_mode == 3: suspend hsync | |
| * blank_mode == 4: powerdown | |
| */ | |
| /* [danj] I think there's something fishy about those constants... */ | |
| /* | |
| struct fb_info_platinum *info = (struct fb_info_platinum *) fb; | |
| int ctrl; | |
| ctrl = le32_to_cpup(&info->platinum_regs->ctrl.r) | 0x33; | |
| if (blank) | |
| --blank_mode; | |
| if (blank & VESA_VSYNC_SUSPEND) | |
| ctrl &= ~3; | |
| if (blank & VESA_HSYNC_SUSPEND) | |
| ctrl &= ~0x30; | |
| out_le32(&info->platinum_regs->ctrl.r, ctrl); | |
| */ | |
| /* TODO: Figure out how the heck to powerdown this thing! */ | |
| return 0; | |
| } | |
| static int platinumfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int transp, struct fb_info *info) | |
| { | |
| struct fb_info_platinum *pinfo = info->par; | |
| volatile struct cmap_regs __iomem *cmap_regs = pinfo->cmap_regs; | |
| if (regno > 255) | |
| return 1; | |
| red >>= 8; | |
| green >>= 8; | |
| blue >>= 8; | |
| pinfo->palette[regno].red = red; | |
| pinfo->palette[regno].green = green; | |
| pinfo->palette[regno].blue = blue; | |
| out_8(&cmap_regs->addr, regno); /* tell clut what addr to fill */ | |
| out_8(&cmap_regs->lut, red); /* send one color channel at */ | |
| out_8(&cmap_regs->lut, green); /* a time... */ | |
| out_8(&cmap_regs->lut, blue); | |
| if (regno < 16) { | |
| int i; | |
| u32 *pal = info->pseudo_palette; | |
| switch (pinfo->cmode) { | |
| case CMODE_16: | |
| pal[regno] = (regno << 10) | (regno << 5) | regno; | |
| break; | |
| case CMODE_32: | |
| i = (regno << 8) | regno; | |
| pal[regno] = (i << 16) | i; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static inline int platinum_vram_reqd(int video_mode, int color_mode) | |
| { | |
| int baseval = vmode_attrs[video_mode-1].hres * (1<<color_mode); | |
| if ((video_mode == VMODE_832_624_75) && (color_mode > CMODE_8)) | |
| baseval += 0x10; | |
| else | |
| baseval += 0x20; | |
| return vmode_attrs[video_mode-1].vres * baseval + 0x1000; | |
| } | |
| #define STORE_D2(a, d) { \ | |
| out_8(&cmap_regs->addr, (a+32)); \ | |
| out_8(&cmap_regs->d2, (d)); \ | |
| } | |
| static void set_platinum_clock(struct fb_info_platinum *pinfo) | |
| { | |
| volatile struct cmap_regs __iomem *cmap_regs = pinfo->cmap_regs; | |
| struct platinum_regvals *init; | |
| init = platinum_reg_init[pinfo->vmode-1]; | |
| STORE_D2(6, 0xc6); | |
| out_8(&cmap_regs->addr,3+32); | |
| if (in_8(&cmap_regs->d2) == 2) { | |
| STORE_D2(7, init->clock_params[pinfo->clktype][0]); | |
| STORE_D2(8, init->clock_params[pinfo->clktype][1]); | |
| STORE_D2(3, 3); | |
| } else { | |
| STORE_D2(4, init->clock_params[pinfo->clktype][0]); | |
| STORE_D2(5, init->clock_params[pinfo->clktype][1]); | |
| STORE_D2(3, 2); | |
| } | |
| __delay(5000); | |
| STORE_D2(9, 0xa6); | |
| } | |
| /* Now how about actually saying, Make it so! */ | |
| /* Some things in here probably don't need to be done each time. */ | |
| static void platinum_set_hardware(struct fb_info_platinum *pinfo) | |
| { | |
| volatile struct platinum_regs __iomem *platinum_regs = pinfo->platinum_regs; | |
| volatile struct cmap_regs __iomem *cmap_regs = pinfo->cmap_regs; | |
| struct platinum_regvals *init; | |
| int i; | |
| int vmode, cmode; | |
| vmode = pinfo->vmode; | |
| cmode = pinfo->cmode; | |
| init = platinum_reg_init[vmode - 1]; | |
| /* Initialize display timing registers */ | |
| out_be32(&platinum_regs->reg[24].r, 7); /* turn display off */ | |
| for (i = 0; i < 26; ++i) | |
| out_be32(&platinum_regs->reg[i+32].r, init->regs[i]); | |
| out_be32(&platinum_regs->reg[26+32].r, (pinfo->total_vram == 0x100000 ? | |
| init->offset[cmode] + 4 - cmode : | |
| init->offset[cmode])); | |
| out_be32(&platinum_regs->reg[16].r, (unsigned) pinfo->frame_buffer_phys+init->fb_offset+0x10); | |
| out_be32(&platinum_regs->reg[18].r, init->pitch[cmode]); | |
| out_be32(&platinum_regs->reg[19].r, (pinfo->total_vram == 0x100000 ? | |
| init->mode[cmode+1] : | |
| init->mode[cmode])); | |
| out_be32(&platinum_regs->reg[20].r, (pinfo->total_vram == 0x100000 ? 0x11 : 0x1011)); | |
| out_be32(&platinum_regs->reg[21].r, 0x100); | |
| out_be32(&platinum_regs->reg[22].r, 1); | |
| out_be32(&platinum_regs->reg[23].r, 1); | |
| out_be32(&platinum_regs->reg[26].r, 0xc00); | |
| out_be32(&platinum_regs->reg[27].r, 0x235); | |
| /* out_be32(&platinum_regs->reg[27].r, 0x2aa); */ | |
| STORE_D2(0, (pinfo->total_vram == 0x100000 ? | |
| init->dacula_ctrl[cmode] & 0xf : | |
| init->dacula_ctrl[cmode])); | |
| STORE_D2(1, 4); | |
| STORE_D2(2, 0); | |
| set_platinum_clock(pinfo); | |
| out_be32(&platinum_regs->reg[24].r, 0); /* turn display on */ | |
| } | |
| /* | |
| * Set misc info vars for this driver | |
| */ | |
| static void platinum_init_info(struct fb_info *info, | |
| struct fb_info_platinum *pinfo) | |
| { | |
| /* Fill fb_info */ | |
| info->fbops = &platinumfb_ops; | |
| info->pseudo_palette = pinfo->pseudo_palette; | |
| info->flags = FBINFO_DEFAULT; | |
| info->screen_base = pinfo->frame_buffer + 0x20; | |
| fb_alloc_cmap(&info->cmap, 256, 0); | |
| /* Fill fix common fields */ | |
| strcpy(info->fix.id, "platinum"); | |
| info->fix.mmio_start = pinfo->platinum_regs_phys; | |
| info->fix.mmio_len = 0x1000; | |
| info->fix.type = FB_TYPE_PACKED_PIXELS; | |
| info->fix.smem_start = pinfo->frame_buffer_phys + 0x20; /* will be updated later */ | |
| info->fix.smem_len = pinfo->total_vram - 0x20; | |
| info->fix.ywrapstep = 0; | |
| info->fix.xpanstep = 0; | |
| info->fix.ypanstep = 0; | |
| info->fix.type_aux = 0; | |
| info->fix.accel = FB_ACCEL_NONE; | |
| } | |
| static int platinum_init_fb(struct fb_info *info) | |
| { | |
| struct fb_info_platinum *pinfo = info->par; | |
| struct fb_var_screeninfo var; | |
| int sense, rc; | |
| sense = read_platinum_sense(pinfo); | |
| printk(KERN_INFO "platinumfb: Monitor sense value = 0x%x, ", sense); | |
| if (default_vmode == VMODE_NVRAM) { | |
| #ifdef CONFIG_NVRAM | |
| default_vmode = nvram_read_byte(NV_VMODE); | |
| if (default_vmode <= 0 || default_vmode > VMODE_MAX || | |
| !platinum_reg_init[default_vmode-1]) | |
| #endif | |
| default_vmode = VMODE_CHOOSE; | |
| } | |
| if (default_vmode == VMODE_CHOOSE) { | |
| default_vmode = mac_map_monitor_sense(sense); | |
| } | |
| if (default_vmode <= 0 || default_vmode > VMODE_MAX) | |
| default_vmode = VMODE_640_480_60; | |
| #ifdef CONFIG_NVRAM | |
| if (default_cmode == CMODE_NVRAM) | |
| default_cmode = nvram_read_byte(NV_CMODE); | |
| #endif | |
| if (default_cmode < CMODE_8 || default_cmode > CMODE_32) | |
| default_cmode = CMODE_8; | |
| /* | |
| * Reduce the pixel size if we don't have enough VRAM. | |
| */ | |
| while(default_cmode > CMODE_8 && | |
| platinum_vram_reqd(default_vmode, default_cmode) > pinfo->total_vram) | |
| default_cmode--; | |
| printk("platinumfb: Using video mode %d and color mode %d.\n", default_vmode, default_cmode); | |
| /* Setup default var */ | |
| if (mac_vmode_to_var(default_vmode, default_cmode, &var) < 0) { | |
| /* This shouldn't happen! */ | |
| printk("mac_vmode_to_var(%d, %d,) failed\n", default_vmode, default_cmode); | |
| try_again: | |
| default_vmode = VMODE_640_480_60; | |
| default_cmode = CMODE_8; | |
| if (mac_vmode_to_var(default_vmode, default_cmode, &var) < 0) { | |
| printk(KERN_ERR "platinumfb: mac_vmode_to_var() failed\n"); | |
| return -ENXIO; | |
| } | |
| } | |
| /* Initialize info structure */ | |
| platinum_init_info(info, pinfo); | |
| /* Apply default var */ | |
| info->var = var; | |
| var.activate = FB_ACTIVATE_NOW; | |
| rc = fb_set_var(info, &var); | |
| if (rc && (default_vmode != VMODE_640_480_60 || default_cmode != CMODE_8)) | |
| goto try_again; | |
| /* Register with fbdev layer */ | |
| rc = register_framebuffer(info); | |
| if (rc < 0) | |
| return rc; | |
| fb_info(info, "Apple Platinum frame buffer device\n"); | |
| return 0; | |
| } | |
| /* | |
| * Get the monitor sense value. | |
| * Note that this can be called before calibrate_delay, | |
| * so we can't use udelay. | |
| */ | |
| static int read_platinum_sense(struct fb_info_platinum *info) | |
| { | |
| volatile struct platinum_regs __iomem *platinum_regs = info->platinum_regs; | |
| int sense; | |
| out_be32(&platinum_regs->reg[23].r, 7); /* turn off drivers */ | |
| __delay(2000); | |
| sense = (~in_be32(&platinum_regs->reg[23].r) & 7) << 8; | |
| /* drive each sense line low in turn and collect the other 2 */ | |
| out_be32(&platinum_regs->reg[23].r, 3); /* drive A low */ | |
| __delay(2000); | |
| sense |= (~in_be32(&platinum_regs->reg[23].r) & 3) << 4; | |
| out_be32(&platinum_regs->reg[23].r, 5); /* drive B low */ | |
| __delay(2000); | |
| sense |= (~in_be32(&platinum_regs->reg[23].r) & 4) << 1; | |
| sense |= (~in_be32(&platinum_regs->reg[23].r) & 1) << 2; | |
| out_be32(&platinum_regs->reg[23].r, 6); /* drive C low */ | |
| __delay(2000); | |
| sense |= (~in_be32(&platinum_regs->reg[23].r) & 6) >> 1; | |
| out_be32(&platinum_regs->reg[23].r, 7); /* turn off drivers */ | |
| return sense; | |
| } | |
| /* | |
| * This routine takes a user-supplied var, and picks the best vmode/cmode from it. | |
| * It also updates the var structure to the actual mode data obtained | |
| */ | |
| static int platinum_var_to_par(struct fb_var_screeninfo *var, | |
| struct fb_info_platinum *pinfo, | |
| int check_only) | |
| { | |
| int vmode, cmode; | |
| if (mac_var_to_vmode(var, &vmode, &cmode) != 0) { | |
| printk(KERN_ERR "platinum_var_to_par: mac_var_to_vmode unsuccessful.\n"); | |
| printk(KERN_ERR "platinum_var_to_par: var->xres = %d\n", var->xres); | |
| printk(KERN_ERR "platinum_var_to_par: var->yres = %d\n", var->yres); | |
| printk(KERN_ERR "platinum_var_to_par: var->xres_virtual = %d\n", var->xres_virtual); | |
| printk(KERN_ERR "platinum_var_to_par: var->yres_virtual = %d\n", var->yres_virtual); | |
| printk(KERN_ERR "platinum_var_to_par: var->bits_per_pixel = %d\n", var->bits_per_pixel); | |
| printk(KERN_ERR "platinum_var_to_par: var->pixclock = %d\n", var->pixclock); | |
| printk(KERN_ERR "platinum_var_to_par: var->vmode = %d\n", var->vmode); | |
| return -EINVAL; | |
| } | |
| if (!platinum_reg_init[vmode-1]) { | |
| printk(KERN_ERR "platinum_var_to_par, vmode %d not valid.\n", vmode); | |
| return -EINVAL; | |
| } | |
| if (platinum_vram_reqd(vmode, cmode) > pinfo->total_vram) { | |
| printk(KERN_ERR "platinum_var_to_par, not enough ram for vmode %d, cmode %d.\n", vmode, cmode); | |
| return -EINVAL; | |
| } | |
| if (mac_vmode_to_var(vmode, cmode, var)) | |
| return -EINVAL; | |
| if (check_only) | |
| return 0; | |
| pinfo->vmode = vmode; | |
| pinfo->cmode = cmode; | |
| pinfo->xres = vmode_attrs[vmode-1].hres; | |
| pinfo->yres = vmode_attrs[vmode-1].vres; | |
| pinfo->xoffset = 0; | |
| pinfo->yoffset = 0; | |
| pinfo->vxres = pinfo->xres; | |
| pinfo->vyres = pinfo->yres; | |
| return 0; | |
| } | |
| /* | |
| * Parse user specified options (`video=platinumfb:') | |
| */ | |
| static int __init platinumfb_setup(char *options) | |
| { | |
| char *this_opt; | |
| if (!options || !*options) | |
| return 0; | |
| while ((this_opt = strsep(&options, ",")) != NULL) { | |
| if (!strncmp(this_opt, "vmode:", 6)) { | |
| int vmode = simple_strtoul(this_opt+6, NULL, 0); | |
| if (vmode > 0 && vmode <= VMODE_MAX) | |
| default_vmode = vmode; | |
| } else if (!strncmp(this_opt, "cmode:", 6)) { | |
| int depth = simple_strtoul(this_opt+6, NULL, 0); | |
| switch (depth) { | |
| case 0: | |
| case 8: | |
| default_cmode = CMODE_8; | |
| break; | |
| case 15: | |
| case 16: | |
| default_cmode = CMODE_16; | |
| break; | |
| case 24: | |
| case 32: | |
| default_cmode = CMODE_32; | |
| break; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| #ifdef __powerpc__ | |
| #define invalidate_cache(addr) \ | |
| asm volatile("eieio; dcbf 0,%1" \ | |
| : "=m" (*(addr)) : "r" (addr) : "memory"); | |
| #else | |
| #define invalidate_cache(addr) | |
| #endif | |
| static int platinumfb_probe(struct platform_device* odev) | |
| { | |
| struct device_node *dp = odev->dev.of_node; | |
| struct fb_info *info; | |
| struct fb_info_platinum *pinfo; | |
| volatile __u8 *fbuffer; | |
| int bank0, bank1, bank2, bank3, rc; | |
| dev_info(&odev->dev, "Found Apple Platinum video hardware\n"); | |
| info = framebuffer_alloc(sizeof(*pinfo), &odev->dev); | |
| if (info == NULL) { | |
| dev_err(&odev->dev, "Failed to allocate fbdev !\n"); | |
| return -ENOMEM; | |
| } | |
| pinfo = info->par; | |
| if (of_address_to_resource(dp, 0, &pinfo->rsrc_reg) || | |
| of_address_to_resource(dp, 1, &pinfo->rsrc_fb)) { | |
| dev_err(&odev->dev, "Can't get resources\n"); | |
| framebuffer_release(info); | |
| return -ENXIO; | |
| } | |
| dev_dbg(&odev->dev, " registers : 0x%llx...0x%llx\n", | |
| (unsigned long long)pinfo->rsrc_reg.start, | |
| (unsigned long long)pinfo->rsrc_reg.end); | |
| dev_dbg(&odev->dev, " framebuffer: 0x%llx...0x%llx\n", | |
| (unsigned long long)pinfo->rsrc_fb.start, | |
| (unsigned long long)pinfo->rsrc_fb.end); | |
| /* Do not try to request register space, they overlap with the | |
| * northbridge and that can fail. Only request framebuffer | |
| */ | |
| if (!request_mem_region(pinfo->rsrc_fb.start, | |
| resource_size(&pinfo->rsrc_fb), | |
| "platinumfb framebuffer")) { | |
| printk(KERN_ERR "platinumfb: Can't request framebuffer !\n"); | |
| framebuffer_release(info); | |
| return -ENXIO; | |
| } | |
| /* frame buffer - map only 4MB */ | |
| pinfo->frame_buffer_phys = pinfo->rsrc_fb.start; | |
| pinfo->frame_buffer = __ioremap(pinfo->rsrc_fb.start, 0x400000, | |
| _PAGE_WRITETHRU); | |
| pinfo->base_frame_buffer = pinfo->frame_buffer; | |
| /* registers */ | |
| pinfo->platinum_regs_phys = pinfo->rsrc_reg.start; | |
| pinfo->platinum_regs = ioremap(pinfo->rsrc_reg.start, 0x1000); | |
| pinfo->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */ | |
| request_mem_region(pinfo->cmap_regs_phys, 0x1000, "platinumfb cmap"); | |
| pinfo->cmap_regs = ioremap(pinfo->cmap_regs_phys, 0x1000); | |
| /* Grok total video ram */ | |
| out_be32(&pinfo->platinum_regs->reg[16].r, (unsigned)pinfo->frame_buffer_phys); | |
| out_be32(&pinfo->platinum_regs->reg[20].r, 0x1011); /* select max vram */ | |
| out_be32(&pinfo->platinum_regs->reg[24].r, 0); /* switch in vram */ | |
| fbuffer = pinfo->base_frame_buffer; | |
| fbuffer[0x100000] = 0x34; | |
| fbuffer[0x100008] = 0x0; | |
| invalidate_cache(&fbuffer[0x100000]); | |
| fbuffer[0x200000] = 0x56; | |
| fbuffer[0x200008] = 0x0; | |
| invalidate_cache(&fbuffer[0x200000]); | |
| fbuffer[0x300000] = 0x78; | |
| fbuffer[0x300008] = 0x0; | |
| invalidate_cache(&fbuffer[0x300000]); | |
| bank0 = 1; /* builtin 1MB vram, always there */ | |
| bank1 = fbuffer[0x100000] == 0x34; | |
| bank2 = fbuffer[0x200000] == 0x56; | |
| bank3 = fbuffer[0x300000] == 0x78; | |
| pinfo->total_vram = (bank0 + bank1 + bank2 + bank3) * 0x100000; | |
| printk(KERN_INFO "platinumfb: Total VRAM = %dMB (%d%d%d%d)\n", | |
| (unsigned int) (pinfo->total_vram / 1024 / 1024), | |
| bank3, bank2, bank1, bank0); | |
| /* | |
| * Try to determine whether we have an old or a new DACula. | |
| */ | |
| out_8(&pinfo->cmap_regs->addr, 0x40); | |
| pinfo->dactype = in_8(&pinfo->cmap_regs->d2); | |
| switch (pinfo->dactype) { | |
| case 0x3c: | |
| pinfo->clktype = 1; | |
| printk(KERN_INFO "platinumfb: DACula type 0x3c\n"); | |
| break; | |
| case 0x84: | |
| pinfo->clktype = 0; | |
| printk(KERN_INFO "platinumfb: DACula type 0x84\n"); | |
| break; | |
| default: | |
| pinfo->clktype = 0; | |
| printk(KERN_INFO "platinumfb: Unknown DACula type: %x\n", pinfo->dactype); | |
| break; | |
| } | |
| dev_set_drvdata(&odev->dev, info); | |
| rc = platinum_init_fb(info); | |
| if (rc != 0) { | |
| iounmap(pinfo->frame_buffer); | |
| iounmap(pinfo->platinum_regs); | |
| iounmap(pinfo->cmap_regs); | |
| framebuffer_release(info); | |
| } | |
| return rc; | |
| } | |
| static int platinumfb_remove(struct platform_device* odev) | |
| { | |
| struct fb_info *info = dev_get_drvdata(&odev->dev); | |
| struct fb_info_platinum *pinfo = info->par; | |
| unregister_framebuffer (info); | |
| /* Unmap frame buffer and registers */ | |
| iounmap(pinfo->frame_buffer); | |
| iounmap(pinfo->platinum_regs); | |
| iounmap(pinfo->cmap_regs); | |
| release_mem_region(pinfo->rsrc_fb.start, | |
| resource_size(&pinfo->rsrc_fb)); | |
| release_mem_region(pinfo->cmap_regs_phys, 0x1000); | |
| framebuffer_release(info); | |
| return 0; | |
| } | |
| static struct of_device_id platinumfb_match[] = | |
| { | |
| { | |
| .name = "platinum", | |
| }, | |
| {}, | |
| }; | |
| static struct platform_driver platinum_driver = | |
| { | |
| .driver = { | |
| .name = "platinumfb", | |
| .of_match_table = platinumfb_match, | |
| }, | |
| .probe = platinumfb_probe, | |
| .remove = platinumfb_remove, | |
| }; | |
| static int __init platinumfb_init(void) | |
| { | |
| #ifndef MODULE | |
| char *option = NULL; | |
| if (fb_get_options("platinumfb", &option)) | |
| return -ENODEV; | |
| platinumfb_setup(option); | |
| #endif | |
| platform_driver_register(&platinum_driver); | |
| return 0; | |
| } | |
| static void __exit platinumfb_exit(void) | |
| { | |
| platform_driver_unregister(&platinum_driver); | |
| } | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("framebuffer driver for Apple Platinum video"); | |
| module_init(platinumfb_init); | |
| #ifdef MODULE | |
| module_exit(platinumfb_exit); | |
| #endif |