| # |
| # Platform drivers |
| # Most drivers here are currently for webcam support |
| |
| menuconfig V4L_PLATFORM_DRIVERS |
| bool "V4L platform devices" |
| depends on MEDIA_CAMERA_SUPPORT |
| default n |
| ---help--- |
| Say Y here to enable support for platform-specific V4L drivers. |
| |
| if V4L_PLATFORM_DRIVERS |
| |
| source "drivers/media/platform/marvell-ccic/Kconfig" |
| |
| config VIDEO_VIA_CAMERA |
| tristate "VIAFB camera controller support" |
| depends on FB_VIA |
| select VIDEOBUF_DMA_SG |
| select VIDEO_OV7670 |
| help |
| Driver support for the integrated camera controller in VIA |
| Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems |
| with ov7670 sensors. |
| |
| # |
| # Platform multimedia device configuration |
| # |
| |
| source "drivers/media/platform/davinci/Kconfig" |
| |
| source "drivers/media/platform/omap/Kconfig" |
| |
| source "drivers/media/platform/blackfin/Kconfig" |
| |
| config VIDEO_SH_VOU |
| tristate "SuperH VOU video output driver" |
| depends on MEDIA_CAMERA_SUPPORT |
| depends on VIDEO_DEV && I2C && HAS_DMA |
| depends on ARCH_SHMOBILE || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| help |
| Support for the Video Output Unit (VOU) on SuperH SoCs. |
| |
| config VIDEO_VIU |
| tristate "Freescale VIU Video Driver" |
| depends on VIDEO_V4L2 && PPC_MPC512x |
| select VIDEOBUF_DMA_CONTIG |
| default y |
| ---help--- |
| Support for Freescale VIU video driver. This device captures |
| video data, or overlays video on DIU frame buffer. |
| |
| Say Y here if you want to enable VIU device on MPC5121e Rev2+. |
| In doubt, say N. |
| |
| config VIDEO_M32R_AR |
| tristate "AR devices" |
| depends on VIDEO_V4L2 |
| depends on M32R || COMPILE_TEST |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial Retina) |
| camera module. |
| |
| config VIDEO_M32R_AR_M64278 |
| tristate "AR device with color module M64278(VGA)" |
| depends on PLAT_M32700UT |
| select VIDEO_M32R_AR |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial |
| Retina) with M64278E-800 camera module. |
| This module supports VGA(640x480 pixels) resolutions. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called arv. |
| |
| config VIDEO_OMAP3 |
| tristate "OMAP 3 Camera support" |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 |
| depends on HAS_DMA && OF |
| depends on OMAP_IOMMU |
| select ARM_DMA_USE_IOMMU |
| select VIDEOBUF2_DMA_CONTIG |
| select MFD_SYSCON |
| ---help--- |
| Driver for an OMAP 3 camera controller. |
| |
| config VIDEO_OMAP3_DEBUG |
| bool "OMAP 3 Camera debug messages" |
| depends on VIDEO_OMAP3 |
| ---help--- |
| Enable debug messages on OMAP 3 camera controller driver. |
| |
| config VIDEO_PXA27x |
| tristate "PXA27x Quick Capture Interface driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA |
| depends on PXA27x || COMPILE_TEST |
| select VIDEOBUF2_DMA_SG |
| select SG_SPLIT |
| ---help--- |
| This is a v4l2 driver for the PXA27x Quick Capture Interface |
| |
| config VIDEO_S3C_CAMIF |
| tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" |
| depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API |
| depends on PM |
| depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| ---help--- |
| This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera |
| host interface (CAMIF). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called s3c-camif. |
| |
| config VIDEO_MXC_OUTPUT |
| tristate "MXC Video For Linux Video Output" |
| depends on VIDEO_DEV && ARCH_MXC && FB_MXC |
| select VIDEOBUF_DMA_CONTIG |
| ---help--- |
| This is the video4linux2 output driver based on MXC module. |
| |
| config VIDEO_MXC_CAPTURE |
| tristate "MXC Video For Linux Video Capture" |
| depends on VIDEO_V4L2 |
| ---help--- |
| This is the video4linux2 capture driver based on i.MX video-in module. |
| |
| config VIDEO_MX8_CAPTURE |
| tristate "MX8 Video For Linux Video Capture" |
| depends on VIDEO_V4L2 |
| ---help--- |
| This is the video4linux2 capture driver based on i.MX8 module. |
| |
| source "drivers/media/platform/imx8/Kconfig" |
| source "drivers/media/platform/mxc/capture/Kconfig" |
| source "drivers/media/platform/mxc/output/Kconfig" |
| source "drivers/media/platform/soc_camera/Kconfig" |
| source "drivers/media/platform/exynos4-is/Kconfig" |
| source "drivers/media/platform/am437x/Kconfig" |
| source "drivers/media/platform/xilinx/Kconfig" |
| source "drivers/media/platform/rcar-vin/Kconfig" |
| source "drivers/media/platform/atmel/Kconfig" |
| |
| config VIDEO_TI_CAL |
| tristate "TI CAL (Camera Adaptation Layer) driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
| depends on SOC_DRA7XX || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| default n |
| ---help--- |
| Support for the TI CAL (Camera Adaptation Layer) block |
| found on DRA72X SoC. |
| In TI Technical Reference Manual this module is referred as |
| Camera Interface Subsystem (CAMSS). |
| |
| |
| endif # V4L_PLATFORM_DRIVERS |
| |
| menuconfig V4L_MEM2MEM_DRIVERS |
| bool "Memory-to-memory multimedia devices" |
| depends on VIDEO_V4L2 |
| depends on MEDIA_CAMERA_SUPPORT |
| default n |
| ---help--- |
| Say Y here to enable selecting drivers for V4L devices that |
| use system memory for both source and destination buffers, as opposed |
| to capture and output drivers, which use memory buffers for just |
| one of those. |
| |
| if V4L_MEM2MEM_DRIVERS |
| |
| config VIDEO_CODA |
| tristate "Chips&Media Coda multi-standard codec IP" |
| depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC |
| depends on HAS_DMA |
| select SRAM |
| select VIDEOBUF2_DMA_CONTIG |
| select VIDEOBUF2_VMALLOC |
| select V4L2_MEM2MEM_DEV |
| select GENERIC_ALLOCATOR |
| ---help--- |
| Coda is a range of video codec IPs that supports |
| H.264, MPEG-4, and other video formats. |
| |
| config VIDEO_MEDIATEK_VPU |
| tristate "Mediatek Video Processor Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| ---help--- |
| This driver provides downloading VPU firmware and |
| communicating with VPU. This driver for hw video |
| codec embedded in Mediatek's MT8173 SOCs. It is able |
| to handle video decoding/encoding in a range of formats. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mtk-vpu. |
| |
| config VIDEO_MEDIATEK_VCODEC |
| tristate "Mediatek Video Codec driver" |
| depends on MTK_IOMMU || COMPILE_TEST |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA |
| depends on ARCH_MEDIATEK || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| select VIDEO_MEDIATEK_VPU |
| default n |
| ---help--- |
| Mediatek video codec driver provides HW capability to |
| encode and decode in a range of video formats |
| This driver rely on VPU driver to communicate with VPU. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mtk-vcodec |
| |
| config VIDEO_MEM2MEM_DEINTERLACE |
| tristate "Deinterlace support" |
| depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Generic deinterlacing V4L2 driver. |
| |
| config VIDEO_SAMSUNG_S5P_G2D |
| tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| default n |
| ---help--- |
| This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D |
| 2d graphics accelerator. |
| |
| config VIDEO_SAMSUNG_S5P_JPEG |
| tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| ---help--- |
| This is a v4l2 driver for Samsung S5P, EXYNOS3250 |
| and EXYNOS4 JPEG codec |
| |
| config VIDEO_SAMSUNG_S5P_MFC |
| tristate "Samsung S5P MFC Video Codec" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| default n |
| help |
| MFC 5.1 and 6.x driver for V4L2 |
| |
| config VIDEO_MX2_EMMAPRP |
| tristate "MX2 eMMa-PrP support" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on SOC_IMX27 || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| MX2X chips have a PrP that can be used to process buffers from |
| memory to memory. Operations include resizing and format |
| conversion. |
| |
| config VIDEO_SAMSUNG_EXYNOS_GSC |
| tristate "Samsung Exynos G-Scaler driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on ARCH_EXYNOS5 || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler. |
| |
| config VIDEO_STI_BDISP |
| tristate "STMicroelectronics BDISP 2D blitter driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on HAS_DMA |
| depends on ARCH_STI || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This v4l2 mem2mem driver is a 2D blitter for STMicroelectronics SoC. |
| |
| config VIDEO_STI_HVA |
| tristate "STMicroelectronics HVA multi-format video encoder V4L2 driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on HAS_DMA |
| depends on ARCH_STI || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| This V4L2 driver enables HVA (Hardware Video Accelerator) multi-format |
| video encoder of STMicroelectronics SoC, allowing hardware encoding of |
| raw uncompressed formats in various compressed video bitstreams format. |
| |
| To compile this driver as a module, choose M here: |
| the module will be called st-hva. |
| |
| config VIDEO_SH_VEU |
| tristate "SuperH VEU mem2mem video processing driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| help |
| Support for the Video Engine Unit (VEU) on SuperH and |
| SH-Mobile SoCs. |
| |
| config VIDEO_RENESAS_JPU |
| tristate "Renesas JPEG Processing Unit" |
| depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA |
| depends on ARCH_RENESAS || COMPILE_TEST |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| ---help--- |
| This is a V4L2 driver for the Renesas JPEG Processing Unit. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rcar_jpu. |
| |
| config VIDEO_RENESAS_FCP |
| tristate "Renesas Frame Compression Processor" |
| depends on ARCH_RENESAS || COMPILE_TEST |
| depends on OF |
| ---help--- |
| This is a driver for the Renesas Frame Compression Processor (FCP). |
| The FCP is a companion module of video processing modules in the |
| Renesas R-Car Gen3 SoCs. It handles memory access for the codec, |
| VSP and FDP modules. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called rcar-fcp. |
| |
| config VIDEO_RENESAS_VSP1 |
| tristate "Renesas VSP1 Video Processing Engine" |
| depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA |
| depends on (ARCH_RENESAS && OF) || COMPILE_TEST |
| depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP |
| select VIDEOBUF2_DMA_CONTIG |
| ---help--- |
| This is a V4L2 driver for the Renesas VSP1 video processing engine. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called vsp1. |
| |
| config VIDEO_TI_VPE |
| tristate "TI VPE (Video Processing Engine) driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| depends on SOC_DRA7XX || COMPILE_TEST |
| depends on HAS_DMA |
| select VIDEOBUF2_DMA_CONTIG |
| select V4L2_MEM2MEM_DEV |
| default n |
| ---help--- |
| Support for the TI VPE(Video Processing Engine) block |
| found on DRA7XX SoC. |
| |
| config VIDEO_TI_VPE_DEBUG |
| bool "VPE debug messages" |
| depends on VIDEO_TI_VPE |
| ---help--- |
| Enable debug messages on VPE driver. |
| |
| endif # V4L_MEM2MEM_DRIVERS |
| |
| menuconfig V4L_TEST_DRIVERS |
| bool "Media test drivers" |
| depends on MEDIA_CAMERA_SUPPORT |
| |
| if V4L_TEST_DRIVERS |
| |
| source "drivers/media/platform/vivid/Kconfig" |
| |
| config VIDEO_VIM2M |
| tristate "Virtual Memory-to-Memory Driver" |
| depends on VIDEO_DEV && VIDEO_V4L2 |
| select VIDEOBUF2_VMALLOC |
| select V4L2_MEM2MEM_DEV |
| default n |
| ---help--- |
| This is a virtual test device for the memory-to-memory driver |
| framework. |
| endif #V4L_TEST_DRIVERS |
| |
| menuconfig DVB_PLATFORM_DRIVERS |
| bool "DVB platform devices" |
| depends on MEDIA_DIGITAL_TV_SUPPORT |
| default n |
| ---help--- |
| Say Y here to enable support for platform-specific Digital TV drivers. |
| |
| if DVB_PLATFORM_DRIVERS |
| source "drivers/media/platform/sti/c8sectpfe/Kconfig" |
| endif #DVB_PLATFORM_DRIVERS |
