| These files are required to flash the Mendel Linux OS to an attached device |
| using fastboot: |
| |
| 1. On your host computer, install the `fastboot` tool. |
| 2. Using either the serial console or the `fastboot` tool, put the device into |
| fastboot mode (`sudo reboot-bootloader`). |
| 3. Connect to the device using a USB cable, attached to the device's USB data |
| "OTG" port. |
| 4. Run the `flash.sh` script in this directory. |
| |
| For detailed instructions, visit coral.ai/docs/setup. |
| |
| If your board fails to boot, `enable_lk_fastboot.sh` can be used to get your |
| device into fastboot mode. Please see https://coral.ai/docs/dev-board-mini/reflash/ |
| for more details. |
