These files are required to flash the Mendel Linux OS to an attached device
using fastboot:

1. On your host computer, install the `fastboot` tool.
2. Using either the serial console or the `fastboot` tool, put the device into
   fastboot mode (`sudo reboot-bootloader`).
3. Connect to the device using a USB cable, attached to the device's USB data
   "OTG" port.
4. Run the `flash.sh` script in this directory.

For detailed instructions, visit coral.ai/docs/setup.

If your board fails to boot, `enable_lk_fastboot.sh` can be used to get your
device into fastboot mode. Please see https://coral.ai/docs/dev-board-mini/reflash/
for more details.