blob: 7c7fba21f4e8cb1ccd70466b633f2720276d7d52 [file] [log] [blame]
/*
* OMAP USB PHY Support
*
* (C) Copyright 2013
* Texas Instruments, <www.ti.com>
*
* Author: Dan Murphy <dmurphy@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <usb.h>
#include <linux/errno.h>
#include <asm/omap_common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
#include <linux/compat.h>
#include <linux/usb/dwc3.h>
#include <linux/usb/xhci-omap.h>
#include "../host/xhci.h"
#ifdef CONFIG_OMAP_USB3PHY1_HOST
struct usb3_dpll_params {
u16 m;
u8 n;
u8 freq:3;
u8 sd;
u32 mf;
};
struct usb3_dpll_map {
unsigned long rate;
struct usb3_dpll_params params;
struct usb3_dpll_map *dpll_map;
};
static struct usb3_dpll_map dpll_map_usb[] = {
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
{ }, /* Terminator */
};
static struct usb3_dpll_params *omap_usb3_get_dpll_params(void)
{
unsigned long rate;
struct usb3_dpll_map *dpll_map = dpll_map_usb;
rate = get_sys_clk_freq();
for (; dpll_map->rate; dpll_map++) {
if (rate == dpll_map->rate)
return &dpll_map->params;
}
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
return NULL;
}
static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs)
{
u32 val;
writel(SET_PLL_GO, &phy_regs->pll_go);
do {
val = readl(&phy_regs->pll_status);
if (val & PLL_LOCK)
break;
} while (1);
}
static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs)
{
struct usb3_dpll_params *dpll_params;
u32 val;
dpll_params = omap_usb3_get_dpll_params();
if (!dpll_params)
return;
val = readl(&phy_regs->pll_config_1);
val &= ~PLL_REGN_MASK;
val |= dpll_params->n << PLL_REGN_SHIFT;
writel(val, &phy_regs->pll_config_1);
val = readl(&phy_regs->pll_config_2);
val &= ~PLL_SELFREQDCO_MASK;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
writel(val, &phy_regs->pll_config_2);
val = readl(&phy_regs->pll_config_1);
val &= ~PLL_REGM_MASK;
val |= dpll_params->m << PLL_REGM_SHIFT;
writel(val, &phy_regs->pll_config_1);
val = readl(&phy_regs->pll_config_4);
val &= ~PLL_REGM_F_MASK;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
writel(val, &phy_regs->pll_config_4);
val = readl(&phy_regs->pll_config_3);
val &= ~PLL_SD_MASK;
val |= dpll_params->sd << PLL_SD_SHIFT;
writel(val, &phy_regs->pll_config_3);
omap_usb_dpll_relock(phy_regs);
}
static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs)
{
u32 rate = get_sys_clk_freq()/1000000;
u32 val;
val = readl((*ctrl)->control_phy_power_usb);
val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK);
val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON);
val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT;
writel(val, (*ctrl)->control_phy_power_usb);
}
void usb_phy_power(int on)
{
u32 val;
val = readl((*ctrl)->control_phy_power_usb);
if (on) {
val &= ~USB3_PWRCTL_CLK_CMD_MASK;
val |= USB3_PHY_TX_RX_POWERON;
} else {
val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON);
}
writel(val, (*ctrl)->control_phy_power_usb);
}
void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
{
omap_usb_dpll_lock(phy_regs);
usb3_phy_partial_powerup(phy_regs);
/*
* Give enough time for the PHY to partially power-up before
* powering it up completely. delay value suggested by the HW
* team.
*/
mdelay(100);
}
static void omap_enable_usb3_phy(struct omap_xhci *omap)
{
u32 val;
val = (USBOTGSS_DMADISABLE |
USBOTGSS_STANDBYMODE_SMRT_WKUP |
USBOTGSS_IDLEMODE_NOIDLE);
writel(val, &omap->otg_wrapper->sysconfig);
/* Clear the utmi OTG status */
val = readl(&omap->otg_wrapper->utmi_otg_status);
writel(val, &omap->otg_wrapper->utmi_otg_status);
/* Enable interrupts */
writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0);
val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN |
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN |
USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN |
USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN |
USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN |
USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN |
USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN |
USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN |
USBOTGSS_IRQ_SET_1_OEVT_EN);
writel(val, &omap->otg_wrapper->irqenable_set_1);
/* Clear the IRQ status */
val = readl(&omap->otg_wrapper->irqstatus_1);
writel(val, &omap->otg_wrapper->irqstatus_1);
val = readl(&omap->otg_wrapper->irqstatus_0);
writel(val, &omap->otg_wrapper->irqstatus_0);
};
#endif /* CONFIG_OMAP_USB3PHY1_HOST */
#ifdef CONFIG_OMAP_USB2PHY2_HOST
static void omap_enable_usb2_phy2(struct omap_xhci *omap)
{
u32 reg, val;
val = (~USB2PHY_AUTORESUME_EN & USB2PHY_DISCHGDET);
writel(val, (*ctrl)->control_srcomp_north_side);
setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl,
(USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K |
OTG_SS_CLKCTRL_MODULEMODE_HW));
/* This is an undocumented Reserved register */
reg = 0x4a0086c0;
val = readl(reg);
val |= 0x100;
setbits_le32(reg, val);
}
void usb_phy_power(int on)
{
return;
}
#endif /* CONFIG_OMAP_USB2PHY2_HOST */
#ifdef CONFIG_AM437X_USB2PHY2_HOST
static void am437x_enable_usb2_phy2(struct omap_xhci *omap)
{
const u32 usb_otg_ss_clk_val = (USBOTGSSX_CLKCTRL_MODULE_EN |
USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS0_CLKCTRL);
writel(usb_otg_ss_clk_val, PRM_PER_USB_OTG_SS1_CLKCTRL);
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP0_CLKCTRL);
writel(USBPHYOCPSCP_MODULE_EN, PRM_PER_USBPHYOCP2SCP1_CLKCTRL);
}
void usb_phy_power(int on)
{
u32 val;
/* USB1_CTRL */
val = readl(USB1_CTRL);
if (on) {
/*
* these bits are re-used on AM437x to power up/down the USB
* CM and OTG PHYs, if we don't toggle them, USB will not be
* functional on newer silicon revisions
*/
val &= ~(USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN);
} else {
val |= USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN;
}
writel(val, USB1_CTRL);
}
#endif /* CONFIG_AM437X_USB2PHY2_HOST */
void omap_enable_phy(struct omap_xhci *omap)
{
#ifdef CONFIG_OMAP_USB2PHY2_HOST
omap_enable_usb2_phy2(omap);
#endif
#ifdef CONFIG_AM437X_USB2PHY2_HOST
am437x_enable_usb2_phy2(omap);
#endif
#ifdef CONFIG_OMAP_USB3PHY1_HOST
omap_enable_usb3_phy(omap);
omap_usb3_phy_init(omap->usb3_phy);
#endif
}