blob: 9bdbe166df5484f66c6346db2be76bdce7f9c8bd [file] [log] [blame]
/*
* SPI flash internal definitions
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SF_INTERNAL_H_
#define _SF_INTERNAL_H_
#include <linux/types.h>
#include <linux/compiler.h>
/* Dual SPI flash memories - see SPI_COMM_DUAL_... */
enum spi_dual_flash {
SF_SINGLE_FLASH = 0,
SF_DUAL_STACKED_FLASH = BIT(0),
SF_DUAL_PARALLEL_FLASH = BIT(1),
};
enum spi_nor_option_flags {
SNOR_F_SST_WR = BIT(0),
SNOR_F_USE_FSR = BIT(1),
SNOR_F_USE_UPAGE = BIT(3),
};
#define SPI_FLASH_3B_ADDR_LEN 3
#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
#define SPI_FLASH_16MB_BOUN 0x1000000
/* CFI Manufacture ID's */
#define SPI_FLASH_CFI_MFR_SPANSION 0x01
#define SPI_FLASH_CFI_MFR_STMICRO 0x20
#define SPI_FLASH_CFI_MFR_MICRON 0x2C
#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
#define SPI_FLASH_CFI_MFR_SST 0xbf
#define SPI_FLASH_CFI_MFR_WINBOND 0xef
#define SPI_FLASH_CFI_MFR_ATMEL 0x1f
/* Erase commands */
#define CMD_ERASE_4K 0x20
#define CMD_ERASE_CHIP 0xc7
#define CMD_ERASE_64K 0xd8
/* Write commands */
#define CMD_WRITE_STATUS 0x01
#define CMD_PAGE_PROGRAM 0x02
#define CMD_WRITE_DISABLE 0x04
#define CMD_WRITE_ENABLE 0x06
#define CMD_QUAD_PAGE_PROGRAM 0x32
/* Read commands */
#define CMD_READ_ARRAY_SLOW 0x03
#define CMD_READ_ARRAY_FAST 0x0b
#define CMD_READ_DUAL_OUTPUT_FAST 0x3b
#define CMD_READ_DUAL_IO_FAST 0xbb
#define CMD_READ_QUAD_OUTPUT_FAST 0x6b
#define CMD_READ_QUAD_IO_FAST 0xeb
#define CMD_READ_ID 0x9f
#define CMD_READ_STATUS 0x05
#define CMD_READ_STATUS1 0x35
#define CMD_READ_CONFIG 0x35
#define CMD_FLAG_STATUS 0x70
#ifdef CONFIG_SPI_FLASH_4BYTES_ADDR
#define CMD_READ_ARRAY_FAST_4B 0x0c
#define CMD_PAGE_PROGRAM_4B 0x12
#define CMD_ERASE_64K_4B 0xdc
#define CMD_ERASE_4K_4B 0x21
#define CMD_EN4B 0xB7
#endif
/* Bank addr access commands */
#ifdef CONFIG_SPI_FLASH_BAR
# define CMD_BANKADDR_BRWR 0x17
# define CMD_BANKADDR_BRRD 0x16
# define CMD_EXTNADDR_WREAR 0xC5
# define CMD_EXTNADDR_RDEAR 0xC8
#endif
/* Common status */
#define STATUS_WIP BIT(0)
#define STATUS_QEB_WINSPAN BIT(1)
#define STATUS_QEB_MXIC BIT(6)
#define STATUS_PEC BIT(7)
#define SR_BP0 BIT(2) /* Block protect 0 */
#define SR_BP1 BIT(3) /* Block protect 1 */
#define SR_BP2 BIT(4) /* Block protect 2 */
/* Flash timeout values */
#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ)
#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ)
#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
/* SST specific */
#ifdef CONFIG_SPI_FLASH_SST
# define CMD_SST_BP 0x02 /* Byte Program */
# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
#endif
#define JEDEC_MFR(info) ((info)->id[0])
#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
#define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
#define SPI_FLASH_MAX_ID_LEN 6
struct spi_flash_info {
/* Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) */
const char *name;
/*
* This array stores the ID bytes.
* The first three bytes are the JEDIC ID.
* JEDEC ID zero means "no ID" (mostly older chips).
*/
u8 id[SPI_FLASH_MAX_ID_LEN];
u8 id_len;
/*
* The size listed here is what works with SPINOR_OP_SE, which isn't
* necessarily called a "sector" by the vendor.
*/
u32 sector_size;
u32 n_sectors;
u16 page_size;
u16 flags;
#define SECT_4K BIT(0) /* CMD_ERASE_4K works uniformly */
#define E_FSR BIT(1) /* use flag status register for */
#define SST_WR BIT(2) /* use SST byte/word programming */
#define WR_QPP BIT(3) /* use Quad Page Program */
#define RD_QUAD BIT(4) /* use Quad Read */
#define RD_DUAL BIT(5) /* use Dual Read */
#define RD_QUADIO BIT(6) /* use Quad IO Read */
#define RD_DUALIO BIT(7) /* use Dual IO Read */
#define RD_FULL (RD_QUAD | RD_DUAL | RD_QUADIO | RD_DUALIO)
};
extern const struct spi_flash_info spi_flash_ids[];
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
/*
* Send a multi-byte command to the device and read the response. Used
* for flash array reads, etc.
*/
int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/*
* Send a multi-byte command to the device followed by (optional)
* data. Used for programming the flash array, etc.
*/
int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
/* Flash erase(sectors) operation, support all possible erase commands */
int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
/* Lock stmicro spi flash region */
int stm_lock(struct spi_flash *flash, u32 ofs, size_t len);
/* Unlock stmicro spi flash region */
int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len);
/* Check if a stmicro spi flash region is completely locked */
int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len);
/* Enable writing on the SPI flash */
static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0);
}
/* Disable writing on the SPI flash */
static inline int spi_flash_cmd_write_disable(struct spi_flash *flash)
{
return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0);
}
/*
* Used for spi_flash write operation
* - SPI claim
* - spi_flash_cmd_write_enable
* - spi_flash_cmd_write
* - spi_flash_wait_till_ready
* - SPI release
*/
int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, const void *buf, size_t buf_len);
/*
* Flash write operation, support all possible write commands.
* Write the requested data out breaking it up into multiple write
* commands as needed per the write size.
*/
int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
size_t len, const void *buf);
/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
*/
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
/* Flash read operation, support all possible read commands */
int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
size_t len, void *data);
#ifdef CONFIG_SPI_FLASH_MTD
int spi_flash_mtd_register(struct spi_flash *flash);
void spi_flash_mtd_unregister(void);
#endif
/**
* spi_flash_scan - scan the SPI FLASH
* @flash: the spi flash structure
*
* The drivers can use this fuction to scan the SPI FLASH.
* In the scanning, it will try to get all the necessary information to
* fill the spi_flash{}.
*
* Return: 0 for success, others for failure.
*/
int spi_flash_scan(struct spi_flash *flash);
#endif /* _SF_INTERNAL_H_ */