blob: 9c8a37397013d7e3cd482c9deeed612788f82dc6 [file] [log] [blame]
/*
* drivers/mtd/nand/nand_util.c
*
* Copyright (C) 2006 by Weiss-Electronic GmbH.
* All rights reserved.
*
* @author: Guido Classen <clagix@gmail.com>
* @descr: NAND Flash support
* @references: borrowed heavily from Linux mtd-utils code:
* flash_eraseall.c by Arcom Control System Ltd
* nandwrite.c by Steven J. Hill (sjhill@realitydiluted.com)
* and Thomas Gleixner (tglx@linutronix.de)
*
* Copyright (C) 2008 Nokia Corporation: drop_ffs() function by
* Artem Bityutskiy <dedekind1@gmail.com> from mtd-utils
*
* Copyright 2010 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <command.h>
#include <watchdog.h>
#include <malloc.h>
#include <memalign.h>
#include <div64.h>
#include <linux/errno.h>
#include <linux/mtd/mtd.h>
#include <nand.h>
#include <jffs2/jffs2.h>
typedef struct erase_info erase_info_t;
typedef struct mtd_info mtd_info_t;
/* support only for native endian JFFS2 */
#define cpu_to_je16(x) (x)
#define cpu_to_je32(x) (x)
/**
* nand_erase_opts: - erase NAND flash with support for various options
* (jffs2 formatting)
*
* @param mtd nand mtd instance to erase
* @param opts options, @see struct nand_erase_options
* @return 0 in case of success
*
* This code is ported from flash_eraseall.c from Linux mtd utils by
* Arcom Control System Ltd.
*/
int nand_erase_opts(struct mtd_info *mtd,
const nand_erase_options_t *opts)
{
struct jffs2_unknown_node cleanmarker;
erase_info_t erase;
unsigned long erase_length, erased_length; /* in blocks */
int result;
int percent_complete = -1;
const char *mtd_device = mtd->name;
struct mtd_oob_ops oob_opts;
struct nand_chip *chip = mtd_to_nand(mtd);
if ((opts->offset & (mtd->erasesize - 1)) != 0) {
printf("Attempt to erase non block-aligned data\n");
return -1;
}
memset(&erase, 0, sizeof(erase));
memset(&oob_opts, 0, sizeof(oob_opts));
erase.mtd = mtd;
erase.len = mtd->erasesize;
erase.addr = opts->offset;
erase_length = lldiv(opts->length + mtd->erasesize - 1,
mtd->erasesize);
cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
cleanmarker.totlen = cpu_to_je32(8);
/* scrub option allows to erase badblock. To prevent internal
* check from erase() method, set block check method to dummy
* and disable bad block table while erasing.
*/
if (opts->scrub) {
erase.scrub = opts->scrub;
/*
* We don't need the bad block table anymore...
* after scrub, there are no bad blocks left!
*/
if (chip->bbt) {
kfree(chip->bbt);
}
chip->bbt = NULL;
chip->options &= ~NAND_BBT_SCANNED;
}
for (erased_length = 0;
erased_length < erase_length;
erase.addr += mtd->erasesize) {
WATCHDOG_RESET();
if (opts->lim && (erase.addr >= (opts->offset + opts->lim))) {
puts("Size of erase exceeds limit\n");
return -EFBIG;
}
if (!opts->scrub) {
int ret = mtd_block_isbad(mtd, erase.addr);
if (ret > 0) {
if (!opts->quiet)
printf("\rSkipping bad block at "
"0x%08llx "
" \n",
erase.addr);
if (!opts->spread)
erased_length++;
continue;
} else if (ret < 0) {
printf("\n%s: MTD get bad block failed: %d\n",
mtd_device,
ret);
return -1;
}
}
erased_length++;
result = mtd_erase(mtd, &erase);
if (result != 0) {
printf("\n%s: MTD Erase failure: %d\n",
mtd_device, result);
continue;
}
/* format for JFFS2 ? */
if (opts->jffs2 && chip->ecc.layout->oobavail >= 8) {
struct mtd_oob_ops ops;
ops.ooblen = 8;
ops.datbuf = NULL;
ops.oobbuf = (uint8_t *)&cleanmarker;
ops.ooboffs = 0;
ops.mode = MTD_OPS_AUTO_OOB;
result = mtd_write_oob(mtd, erase.addr, &ops);
if (result != 0) {
printf("\n%s: MTD writeoob failure: %d\n",
mtd_device, result);
continue;
}
}
if (!opts->quiet) {
unsigned long long n = erased_length * 100ULL;
int percent;
do_div(n, erase_length);
percent = (int)n;
/* output progress message only at whole percent
* steps to reduce the number of messages printed
* on (slow) serial consoles
*/
if (percent != percent_complete) {
percent_complete = percent;
printf("\rErasing at 0x%llx -- %3d%% complete.",
erase.addr, percent);
if (opts->jffs2 && result == 0)
printf(" Cleanmarker written at 0x%llx.",
erase.addr);
}
}
}
if (!opts->quiet)
printf("\n");
return 0;
}
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
#define NAND_CMD_LOCK_TIGHT 0x2c
#define NAND_CMD_LOCK_STATUS 0x7a
/******************************************************************************
* Support for locking / unlocking operations of some NAND devices
*****************************************************************************/
/**
* nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT
* state
*
* @param mtd nand mtd instance
* @param tight bring device in lock tight mode
*
* @return 0 on success, -1 in case of error
*
* The lock / lock-tight command only applies to the whole chip. To get some
* parts of the chip lock and others unlocked use the following sequence:
*
* - Lock all pages of the chip using nand_lock(mtd, 0) (or the lockpre pin)
* - Call nand_unlock() once for each consecutive area to be unlocked
* - If desired: Bring the chip to the lock-tight state using nand_lock(mtd, 1)
*
* If the device is in lock-tight state software can't change the
* current active lock/unlock state of all pages. nand_lock() / nand_unlock()
* calls will fail. It is only posible to leave lock-tight state by
* an hardware signal (low pulse on _WP pin) or by power down.
*/
int nand_lock(struct mtd_info *mtd, int tight)
{
int ret = 0;
int status;
struct nand_chip *chip = mtd_to_nand(mtd);
/* select the NAND device */
chip->select_chip(mtd, 0);
/* check the Lock Tight Status */
chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, 0);
if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
printf("nand_lock: Device is locked tight!\n");
ret = -1;
goto out;
}
chip->cmdfunc(mtd,
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
-1, -1);
/* call wait ready function */
status = chip->waitfunc(mtd, chip);
/* see if device thinks it succeeded */
if (status & 0x01) {
ret = -1;
}
out:
/* de-select the NAND device */
chip->select_chip(mtd, -1);
return ret;
}
/**
* nand_get_lock_status: - query current lock state from one page of NAND
* flash
*
* @param mtd nand mtd instance
* @param offset page address to query (must be page-aligned!)
*
* @return -1 in case of error
* >0 lock status:
* bitfield with the following combinations:
* NAND_LOCK_STATUS_TIGHT: page in tight state
* NAND_LOCK_STATUS_UNLOCK: page unlocked
*
*/
int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
{
int ret = 0;
int chipnr;
int page;
struct nand_chip *chip = mtd_to_nand(mtd);
/* select the NAND device */
chipnr = (int)(offset >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
if ((offset & (mtd->writesize - 1)) != 0) {
printf("nand_get_lock_status: "
"Start address must be beginning of "
"nand page!\n");
ret = -1;
goto out;
}
/* check the Lock Status */
page = (int)(offset >> chip->page_shift);
chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT
| NAND_LOCK_STATUS_UNLOCK);
out:
/* de-select the NAND device */
chip->select_chip(mtd, -1);
return ret;
}
/**
* nand_unlock: - Unlock area of NAND pages
* only one consecutive area can be unlocked at one time!
*
* @param mtd nand mtd instance
* @param start start byte address
* @param length number of bytes to unlock (must be a multiple of
* page size mtd->writesize)
* @param allexcept if set, unlock everything not selected
*
* @return 0 on success, -1 in case of error
*/
int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
int allexcept)
{
int ret = 0;
int chipnr;
int status;
int page;
struct nand_chip *chip = mtd_to_nand(mtd);
debug("nand_unlock%s: start: %08llx, length: %zd!\n",
allexcept ? " (allexcept)" : "", start, length);
/* select the NAND device */
chipnr = (int)(start >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
/* check the WP bit */
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
printf("nand_unlock: Device is write protected!\n");
ret = -1;
goto out;
}
/* check the Lock Tight Status */
page = (int)(start >> chip->page_shift);
chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
printf("nand_unlock: Device is locked tight!\n");
ret = -1;
goto out;
}
if ((start & (mtd->erasesize - 1)) != 0) {
printf("nand_unlock: Start address must be beginning of "
"nand block!\n");
ret = -1;
goto out;
}
if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
printf("nand_unlock: Length must be a multiple of nand block "
"size %08x!\n", mtd->erasesize);
ret = -1;
goto out;
}
/*
* Set length so that the last address is set to the
* starting address of the last block
*/
length -= mtd->erasesize;
/* submit address of first page to unlock */
chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
/* submit ADDRESS of LAST page to unlock */
page += (int)(length >> chip->page_shift);
/*
* Page addresses for unlocking are supposed to be block-aligned.
* At least some NAND chips use the low bit to indicate that the
* page range should be inverted.
*/
if (allexcept)
page |= 1;
chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask);
/* call wait ready function */
status = chip->waitfunc(mtd, chip);
/* see if device thinks it succeeded */
if (status & 0x01) {
/* there was an error */
ret = -1;
goto out;
}
out:
/* de-select the NAND device */
chip->select_chip(mtd, -1);
return ret;
}
#endif
/**
* check_skip_len
*
* Check if there are any bad blocks, and whether length including bad
* blocks fits into device
*
* @param mtd nand mtd instance
* @param offset offset in flash
* @param length image length
* @param used length of flash needed for the requested length
* @return 0 if the image fits and there are no bad blocks
* 1 if the image fits, but there are bad blocks
* -1 if the image does not fit
*/
static int check_skip_len(struct mtd_info *mtd, loff_t offset, size_t length,
size_t *used)
{
size_t len_excl_bad = 0;
int ret = 0;
while (len_excl_bad < length) {
size_t block_len, block_off;
loff_t block_start;
if (offset >= mtd->size)
return -1;
block_start = offset & ~(loff_t)(mtd->erasesize - 1);
block_off = offset & (mtd->erasesize - 1);
block_len = mtd->erasesize - block_off;
if (!nand_block_isbad(mtd, block_start))
len_excl_bad += block_len;
else
ret = 1;
offset += block_len;
*used += block_len;
}
/* If the length is not a multiple of block_len, adjust. */
if (len_excl_bad > length)
*used -= (len_excl_bad - length);
return ret;
}
#ifdef CONFIG_CMD_NAND_TRIMFFS
static size_t drop_ffs(const struct mtd_info *mtd, const u_char *buf,
const size_t *len)
{
size_t l = *len;
ssize_t i;
for (i = l - 1; i >= 0; i--)
if (buf[i] != 0xFF)
break;
/* The resulting length must be aligned to the minimum flash I/O size */
l = i + 1;
l = (l + mtd->writesize - 1) / mtd->writesize;
l *= mtd->writesize;
/*
* since the input length may be unaligned, prevent access past the end
* of the buffer
*/
return min(l, *len);
}
#endif
/**
* nand_verify_page_oob:
*
* Verify a page of NAND flash, including the OOB.
* Reads page of NAND and verifies the contents and OOB against the
* values in ops.
*
* @param mtd nand mtd instance
* @param ops MTD operations, including data to verify
* @param ofs offset in flash
* @return 0 in case of success
*/
int nand_verify_page_oob(struct mtd_info *mtd, struct mtd_oob_ops *ops,
loff_t ofs)
{
int rval;
struct mtd_oob_ops vops;
size_t verlen = mtd->writesize + mtd->oobsize;
memcpy(&vops, ops, sizeof(vops));
vops.datbuf = memalign(ARCH_DMA_MINALIGN, verlen);
if (!vops.datbuf)
return -ENOMEM;
vops.oobbuf = vops.datbuf + mtd->writesize;
rval = mtd_read_oob(mtd, ofs, &vops);
if (!rval)
rval = memcmp(ops->datbuf, vops.datbuf, vops.len);
if (!rval)
rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen);
free(vops.datbuf);
return rval ? -EIO : 0;
}
/**
* nand_verify:
*
* Verify a region of NAND flash.
* Reads NAND in page-sized chunks and verifies the contents against
* the contents of a buffer. The offset into the NAND must be
* page-aligned, and the function doesn't handle skipping bad blocks.
*
* @param mtd nand mtd instance
* @param ofs offset in flash
* @param len buffer length
* @param buf buffer to read from
* @return 0 in case of success
*/
int nand_verify(struct mtd_info *mtd, loff_t ofs, size_t len, u_char *buf)
{
int rval = 0;
size_t verofs;
size_t verlen = mtd->writesize;
uint8_t *verbuf = memalign(ARCH_DMA_MINALIGN, verlen);
if (!verbuf)
return -ENOMEM;
/* Read the NAND back in page-size groups to limit malloc size */
for (verofs = ofs; verofs < ofs + len;
verofs += verlen, buf += verlen) {
verlen = min(mtd->writesize, (uint32_t)(ofs + len - verofs));
rval = nand_read(mtd, verofs, &verlen, verbuf);
if (!rval || (rval == -EUCLEAN))
rval = memcmp(buf, verbuf, verlen);
if (rval)
break;
}
free(verbuf);
return rval ? -EIO : 0;
}
/**
* nand_write_skip_bad:
*
* Write image to NAND flash.
* Blocks that are marked bad are skipped and the is written to the next
* block instead as long as the image is short enough to fit even after
* skipping the bad blocks. Due to bad blocks we may not be able to
* perform the requested write. In the case where the write would
* extend beyond the end of the NAND device, both length and actual (if
* not NULL) are set to 0. In the case where the write would extend
* beyond the limit we are passed, length is set to 0 and actual is set
* to the required length.
*
* @param mtd nand mtd instance
* @param offset offset in flash
* @param length buffer length
* @param actual set to size required to write length worth of
* buffer or 0 on error, if not NULL
* @param lim maximum size that actual may be in order to not
* exceed the buffer
* @param buffer buffer to read from
* @param flags flags modifying the behaviour of the write to NAND
* @return 0 in case of success
*/
int nand_write_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length,
size_t *actual, loff_t lim, u_char *buffer, int flags)
{
int rval = 0, blocksize;
size_t left_to_write = *length;
size_t used_for_write = 0;
u_char *p_buffer = buffer;
int need_skip;
if (actual)
*actual = 0;
blocksize = mtd->erasesize;
/*
* nand_write() handles unaligned, partial page writes.
*
* We allow length to be unaligned, for convenience in
* using the $filesize variable.
*
* However, starting at an unaligned offset makes the
* semantics of bad block skipping ambiguous (really,
* you should only start a block skipping access at a
* partition boundary). So don't try to handle that.
*/
if ((offset & (mtd->writesize - 1)) != 0) {
printf("Attempt to write non page-aligned data\n");
*length = 0;
return -EINVAL;
}
need_skip = check_skip_len(mtd, offset, *length, &used_for_write);
if (actual)
*actual = used_for_write;
if (need_skip < 0) {
printf("Attempt to write outside the flash area\n");
*length = 0;
return -EINVAL;
}
if (used_for_write > lim) {
puts("Size of write exceeds partition or device limit\n");
*length = 0;
return -EFBIG;
}
if (!need_skip && !(flags & WITH_DROP_FFS)) {
rval = nand_write(mtd, offset, length, buffer);
if ((flags & WITH_WR_VERIFY) && !rval)
rval = nand_verify(mtd, offset, *length, buffer);
if (rval == 0)
return 0;
*length = 0;
printf("NAND write to offset %llx failed %d\n",
offset, rval);
return rval;
}
while (left_to_write > 0) {
size_t block_offset = offset & (mtd->erasesize - 1);
size_t write_size, truncated_write_size;
WATCHDOG_RESET();
if (nand_block_isbad(mtd, offset & ~(mtd->erasesize - 1))) {
printf("Skip bad block 0x%08llx\n",
offset & ~(mtd->erasesize - 1));
offset += mtd->erasesize - block_offset;
continue;
}
if (left_to_write < (blocksize - block_offset))
write_size = left_to_write;
else
write_size = blocksize - block_offset;
truncated_write_size = write_size;
#ifdef CONFIG_CMD_NAND_TRIMFFS
if (flags & WITH_DROP_FFS)
truncated_write_size = drop_ffs(mtd, p_buffer,
&write_size);
#endif
rval = nand_write(mtd, offset, &truncated_write_size,
p_buffer);
if ((flags & WITH_WR_VERIFY) && !rval)
rval = nand_verify(mtd, offset,
truncated_write_size, p_buffer);
offset += write_size;
p_buffer += write_size;
if (rval != 0) {
printf("NAND write to offset %llx failed %d\n",
offset, rval);
*length -= left_to_write;
return rval;
}
left_to_write -= write_size;
}
return 0;
}
/**
* nand_read_skip_bad:
*
* Read image from NAND flash.
* Blocks that are marked bad are skipped and the next block is read
* instead as long as the image is short enough to fit even after
* skipping the bad blocks. Due to bad blocks we may not be able to
* perform the requested read. In the case where the read would extend
* beyond the end of the NAND device, both length and actual (if not
* NULL) are set to 0. In the case where the read would extend beyond
* the limit we are passed, length is set to 0 and actual is set to the
* required length.
*
* @param mtd nand mtd instance
* @param offset offset in flash
* @param length buffer length, on return holds number of read bytes
* @param actual set to size required to read length worth of buffer or 0
* on error, if not NULL
* @param lim maximum size that actual may be in order to not exceed the
* buffer
* @param buffer buffer to write to
* @return 0 in case of success
*/
int nand_read_skip_bad(struct mtd_info *mtd, loff_t offset, size_t *length,
size_t *actual, loff_t lim, u_char *buffer)
{
int rval;
size_t left_to_read = *length;
size_t used_for_read = 0;
u_char *p_buffer = buffer;
int need_skip;
if ((offset & (mtd->writesize - 1)) != 0) {
printf("Attempt to read non page-aligned data\n");
*length = 0;
if (actual)
*actual = 0;
return -EINVAL;
}
need_skip = check_skip_len(mtd, offset, *length, &used_for_read);
if (actual)
*actual = used_for_read;
if (need_skip < 0) {
printf("Attempt to read outside the flash area\n");
*length = 0;
return -EINVAL;
}
if (used_for_read > lim) {
puts("Size of read exceeds partition or device limit\n");
*length = 0;
return -EFBIG;
}
if (!need_skip) {
rval = nand_read(mtd, offset, length, buffer);
if (!rval || rval == -EUCLEAN)
return 0;
*length = 0;
printf("NAND read from offset %llx failed %d\n",
offset, rval);
return rval;
}
while (left_to_read > 0) {
size_t block_offset = offset & (mtd->erasesize - 1);
size_t read_length;
WATCHDOG_RESET();
if (nand_block_isbad(mtd, offset & ~(mtd->erasesize - 1))) {
printf("Skipping bad block 0x%08llx\n",
offset & ~(mtd->erasesize - 1));
offset += mtd->erasesize - block_offset;
continue;
}
if (left_to_read < (mtd->erasesize - block_offset))
read_length = left_to_read;
else
read_length = mtd->erasesize - block_offset;
rval = nand_read(mtd, offset, &read_length, p_buffer);
if (rval && rval != -EUCLEAN) {
printf("NAND read from offset %llx failed %d\n",
offset, rval);
*length -= left_to_read;
return rval;
}
left_to_read -= read_length;
offset += read_length;
p_buffer += read_length;
}
return 0;
}
#ifdef CONFIG_CMD_NAND_TORTURE
/**
* check_pattern:
*
* Check if buffer contains only a certain byte pattern.
*
* @param buf buffer to check
* @param patt the pattern to check
* @param size buffer size in bytes
* @return 1 if there are only patt bytes in buf
* 0 if something else was found
*/
static int check_pattern(const u_char *buf, u_char patt, int size)
{
int i;
for (i = 0; i < size; i++)
if (buf[i] != patt)
return 0;
return 1;
}
/**
* nand_torture:
*
* Torture a block of NAND flash.
* This is useful to determine if a block that caused a write error is still
* good or should be marked as bad.
*
* @param mtd nand mtd instance
* @param offset offset in flash
* @return 0 if the block is still good
*/
int nand_torture(struct mtd_info *mtd, loff_t offset)
{
u_char patterns[] = {0xa5, 0x5a, 0x00};
struct erase_info instr = {
.mtd = mtd,
.addr = offset,
.len = mtd->erasesize,
};
size_t retlen;
int err, ret = -1, i, patt_count;
u_char *buf;
if ((offset & (mtd->erasesize - 1)) != 0) {
puts("Attempt to torture a block at a non block-aligned offset\n");
return -EINVAL;
}
if (offset + mtd->erasesize > mtd->size) {
puts("Attempt to torture a block outside the flash area\n");
return -EINVAL;
}
patt_count = ARRAY_SIZE(patterns);
buf = malloc_cache_aligned(mtd->erasesize);
if (buf == NULL) {
puts("Out of memory for erase block buffer\n");
return -ENOMEM;
}
for (i = 0; i < patt_count; i++) {
err = mtd_erase(mtd, &instr);
if (err) {
printf("%s: erase() failed for block at 0x%llx: %d\n",
mtd->name, instr.addr, err);
goto out;
}
/* Make sure the block contains only 0xff bytes */
err = mtd_read(mtd, offset, mtd->erasesize, &retlen, buf);
if ((err && err != -EUCLEAN) || retlen != mtd->erasesize) {
printf("%s: read() failed for block at 0x%llx: %d\n",
mtd->name, instr.addr, err);
goto out;
}
err = check_pattern(buf, 0xff, mtd->erasesize);
if (!err) {
printf("Erased block at 0x%llx, but a non-0xff byte was found\n",
offset);
ret = -EIO;
goto out;
}
/* Write a pattern and check it */
memset(buf, patterns[i], mtd->erasesize);
err = mtd_write(mtd, offset, mtd->erasesize, &retlen, buf);
if (err || retlen != mtd->erasesize) {
printf("%s: write() failed for block at 0x%llx: %d\n",
mtd->name, instr.addr, err);
goto out;
}
err = mtd_read(mtd, offset, mtd->erasesize, &retlen, buf);
if ((err && err != -EUCLEAN) || retlen != mtd->erasesize) {
printf("%s: read() failed for block at 0x%llx: %d\n",
mtd->name, instr.addr, err);
goto out;
}
err = check_pattern(buf, patterns[i], mtd->erasesize);
if (!err) {
printf("Pattern 0x%.2x checking failed for block at "
"0x%llx\n", patterns[i], offset);
ret = -EIO;
goto out;
}
}
ret = 0;
out:
free(buf);
return ret;
}
#endif