blob: d15504c3aaebda86250b56233d7871a8249bc061 [file] [log] [blame]
/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <mapmem.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cru_rk3288.h>
#include <asm/arch/grf_rk3288.h>
#include <asm/arch/hardware.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/uclass-internal.h>
#include <linux/log2.h>
DECLARE_GLOBAL_DATA_PTR;
struct rk3288_clk_plat {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_rockchip_rk3288_cru dtd;
#endif
};
struct pll_div {
u32 nr;
u32 nf;
u32 no;
};
enum {
VCO_MAX_HZ = 2200U * 1000000,
VCO_MIN_HZ = 440 * 1000000,
OUTPUT_MAX_HZ = 2200U * 1000000,
OUTPUT_MIN_HZ = 27500000,
FREF_MAX_HZ = 2200U * 1000000,
FREF_MIN_HZ = 269 * 1000,
};
enum {
/* PLL CON0 */
PLL_OD_MASK = 0x0f,
/* PLL CON1 */
PLL_NF_MASK = 0x1fff,
/* PLL CON2 */
PLL_BWADJ_MASK = 0x0fff,
/* PLL CON3 */
PLL_RESET_SHIFT = 5,
/* CLKSEL0 */
CORE_SEL_PLL_MASK = 1,
CORE_SEL_PLL_SHIFT = 15,
A17_DIV_MASK = 0x1f,
A17_DIV_SHIFT = 8,
MP_DIV_MASK = 0xf,
MP_DIV_SHIFT = 4,
M0_DIV_MASK = 0xf,
M0_DIV_SHIFT = 0,
/* CLKSEL1: pd bus clk pll sel: codec or general */
PD_BUS_SEL_PLL_MASK = 15,
PD_BUS_SEL_CPLL = 0,
PD_BUS_SEL_GPLL,
/* pd bus pclk div: pclk = pd_bus_aclk /(div + 1) */
PD_BUS_PCLK_DIV_SHIFT = 12,
PD_BUS_PCLK_DIV_MASK = 7,
/* pd bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
PD_BUS_HCLK_DIV_SHIFT = 8,
PD_BUS_HCLK_DIV_MASK = 3,
/* pd bus aclk div: pd_bus_aclk = pd_bus_src_clk /(div0 * div1) */
PD_BUS_ACLK_DIV0_SHIFT = 3,
PD_BUS_ACLK_DIV0_MASK = 0x1f,
PD_BUS_ACLK_DIV1_SHIFT = 0,
PD_BUS_ACLK_DIV1_MASK = 0x7,
/*
* CLKSEL10
* peripheral bus pclk div:
* aclk_bus: pclk_bus = 1:1 or 2:1 or 4:1 or 8:1
*/
PERI_SEL_PLL_MASK = 1,
PERI_SEL_PLL_SHIFT = 15,
PERI_SEL_CPLL = 0,
PERI_SEL_GPLL,
PERI_PCLK_DIV_SHIFT = 12,
PERI_PCLK_DIV_MASK = 3,
/* peripheral bus hclk div: aclk_bus: hclk_bus = 1:1 or 2:1 or 4:1 */
PERI_HCLK_DIV_SHIFT = 8,
PERI_HCLK_DIV_MASK = 3,
/*
* peripheral bus aclk div:
* aclk_periph = periph_clk_src / (peri_aclk_div_con + 1)
*/
PERI_ACLK_DIV_SHIFT = 0,
PERI_ACLK_DIV_MASK = 0x1f,
SOCSTS_DPLL_LOCK = 1 << 5,
SOCSTS_APLL_LOCK = 1 << 6,
SOCSTS_CPLL_LOCK = 1 << 7,
SOCSTS_GPLL_LOCK = 1 << 8,
SOCSTS_NPLL_LOCK = 1 << 9,
};
#define RATE_TO_DIV(input_rate, output_rate) \
((input_rate) / (output_rate) - 1);
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) {\
.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
"divisors on line " __stringify(__LINE__));
/* Keep divisors as low as possible to reduce jitter and power usage */
static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,
const struct pll_div *div)
{
int pll_id = rk_pll_id(clk_id);
struct rk3288_pll *pll = &cru->pll[pll_id];
/* All PLLs have same VCO and output frequency range restrictions. */
uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
uint output_hz = vco_hz / div->no;
debug("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
(uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
(div->no == 1 || !(div->no % 2)));
/* enter reset */
rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);
rk_clrsetreg(&pll->con0,
CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK,
((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
udelay(10);
/* return from reset */
rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);
return 0;
}
static int rkclk_configure_ddr(struct rk3288_cru *cru, struct rk3288_grf *grf,
unsigned int hz)
{
static const struct pll_div dpll_cfg[] = {
{.nf = 25, .nr = 2, .no = 1},
{.nf = 400, .nr = 9, .no = 2},
{.nf = 500, .nr = 9, .no = 2},
{.nf = 100, .nr = 3, .no = 1},
};
int cfg;
switch (hz) {
case 300000000:
cfg = 0;
break;
case 533000000: /* actually 533.3P MHz */
cfg = 1;
break;
case 666000000: /* actually 666.6P MHz */
cfg = 2;
break;
case 800000000:
cfg = 3;
break;
default:
debug("Unsupported SDRAM frequency");
return -EINVAL;
}
/* pll enter slow-mode */
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg]);
/* wait for pll lock */
while (!(readl(&grf->soc_status[1]) & SOCSTS_DPLL_LOCK))
udelay(1);
/* PLL enter normal-mode */
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
DPLL_MODE_NORMAL << DPLL_MODE_SHIFT);
return 0;
}
#ifndef CONFIG_SPL_BUILD
#define VCO_MAX_KHZ 2200000
#define VCO_MIN_KHZ 440000
#define FREF_MAX_KHZ 2200000
#define FREF_MIN_KHZ 269
static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div)
{
uint ref_khz = OSC_HZ / 1000, nr, nf = 0;
uint fref_khz;
uint diff_khz, best_diff_khz;
const uint max_nr = 1 << 6, max_nf = 1 << 12, max_no = 1 << 4;
uint vco_khz;
uint no = 1;
uint freq_khz = freq_hz / 1000;
if (!freq_hz) {
printf("%s: the frequency can not be 0 Hz\n", __func__);
return -EINVAL;
}
no = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz);
if (ext_div) {
*ext_div = DIV_ROUND_UP(no, max_no);
no = DIV_ROUND_UP(no, *ext_div);
}
/* only even divisors (and 1) are supported */
if (no > 1)
no = DIV_ROUND_UP(no, 2) * 2;
vco_khz = freq_khz * no;
if (ext_div)
vco_khz *= *ext_div;
if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || no > max_no) {
printf("%s: Cannot find out a supported VCO for Frequency (%luHz).\n",
__func__, freq_hz);
return -1;
}
div->no = no;
best_diff_khz = vco_khz;
for (nr = 1; nr < max_nr && best_diff_khz; nr++) {
fref_khz = ref_khz / nr;
if (fref_khz < FREF_MIN_KHZ)
break;
if (fref_khz > FREF_MAX_KHZ)
continue;
nf = vco_khz / fref_khz;
if (nf >= max_nf)
continue;
diff_khz = vco_khz - nf * fref_khz;
if (nf + 1 < max_nf && diff_khz > fref_khz / 2) {
nf++;
diff_khz = fref_khz - diff_khz;
}
if (diff_khz >= best_diff_khz)
continue;
best_diff_khz = diff_khz;
div->nr = nr;
div->nf = nf;
}
if (best_diff_khz > 4 * 1000) {
printf("%s: Failed to match output frequency %lu, difference is %u Hz, exceed 4MHZ\n",
__func__, freq_hz, best_diff_khz * 1000);
return -EINVAL;
}
return 0;
}
static int rockchip_mac_set_clk(struct rk3288_cru *cru,
int periph, uint freq)
{
/* Assuming mac_clk is fed by an external clock */
rk_clrsetreg(&cru->cru_clksel_con[21],
RMII_EXTCLK_MASK << RMII_EXTCLK_SHIFT,
RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT);
return 0;
}
static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf,
int periph, unsigned int rate_hz)
{
struct pll_div npll_config = {0};
u32 lcdc_div;
int ret;
ret = pll_para_config(rate_hz, &npll_config, &lcdc_div);
if (ret)
return ret;
rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK << NPLL_MODE_SHIFT,
NPLL_MODE_SLOW << NPLL_MODE_SHIFT);
rkclk_set_pll(cru, CLK_NEW, &npll_config);
/* waiting for pll lock */
while (1) {
if (readl(&grf->soc_status[1]) & SOCSTS_NPLL_LOCK)
break;
udelay(1);
}
rk_clrsetreg(&cru->cru_mode_con, NPLL_MODE_MASK << NPLL_MODE_SHIFT,
NPLL_MODE_NORMAL << NPLL_MODE_SHIFT);
/* vop dclk source clk: npll,dclk_div: 1 */
switch (periph) {
case DCLK_VOP0:
rk_clrsetreg(&cru->cru_clksel_con[27], 0xff << 8 | 3 << 0,
(lcdc_div - 1) << 8 | 2 << 0);
break;
case DCLK_VOP1:
rk_clrsetreg(&cru->cru_clksel_con[29], 0xff << 8 | 3 << 6,
(lcdc_div - 1) << 8 | 2 << 6);
break;
}
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
u32 aclk_div;
u32 hclk_div;
u32 pclk_div;
/* pll enter slow-mode */
rk_clrsetreg(&cru->cru_mode_con,
GPLL_MODE_MASK << GPLL_MODE_SHIFT |
CPLL_MODE_MASK << CPLL_MODE_SHIFT,
GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
CPLL_MODE_SLOW << CPLL_MODE_SHIFT);
/* init pll */
rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg);
/* waiting for pll lock */
while ((readl(&grf->soc_status[1]) &
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
udelay(1);
/*
* pd_bus clock pll source selection and
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
aclk_div = GPLL_HZ / PD_BUS_ACLK_HZ - 1;
assert((aclk_div + 1) * PD_BUS_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
hclk_div = PD_BUS_ACLK_HZ / PD_BUS_HCLK_HZ - 1;
assert((hclk_div + 1) * PD_BUS_HCLK_HZ ==
PD_BUS_ACLK_HZ && (hclk_div < 0x4) && (hclk_div != 0x2));
pclk_div = PD_BUS_ACLK_HZ / PD_BUS_PCLK_HZ - 1;
assert((pclk_div + 1) * PD_BUS_PCLK_HZ ==
PD_BUS_ACLK_HZ && pclk_div < 0x7);
rk_clrsetreg(&cru->cru_clksel_con[1],
PD_BUS_PCLK_DIV_MASK << PD_BUS_PCLK_DIV_SHIFT |
PD_BUS_HCLK_DIV_MASK << PD_BUS_HCLK_DIV_SHIFT |
PD_BUS_ACLK_DIV0_MASK << PD_BUS_ACLK_DIV0_SHIFT |
PD_BUS_ACLK_DIV1_MASK << PD_BUS_ACLK_DIV1_SHIFT,
pclk_div << PD_BUS_PCLK_DIV_SHIFT |
hclk_div << PD_BUS_HCLK_DIV_SHIFT |
aclk_div << PD_BUS_ACLK_DIV0_SHIFT |
0 << 0);
/*
* peri clock pll source selection and
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
assert((1 << hclk_div) * PERI_HCLK_HZ ==
PERI_ACLK_HZ && (hclk_div < 0x4));
pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
assert((1 << pclk_div) * PERI_PCLK_HZ ==
PERI_ACLK_HZ && (pclk_div < 0x4));
rk_clrsetreg(&cru->cru_clksel_con[10],
PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
pclk_div << PERI_PCLK_DIV_SHIFT |
hclk_div << PERI_HCLK_DIV_SHIFT |
aclk_div << PERI_ACLK_DIV_SHIFT);
/* PLL enter normal-mode */
rk_clrsetreg(&cru->cru_mode_con,
GPLL_MODE_MASK << GPLL_MODE_SHIFT |
CPLL_MODE_MASK << CPLL_MODE_SHIFT,
GPLL_MODE_NORMAL << GPLL_MODE_SHIFT |
CPLL_MODE_NORMAL << CPLL_MODE_SHIFT);
}
#endif
void rk3288_clk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
/* pll enter slow-mode */
rk_clrsetreg(&cru->cru_mode_con,
APLL_MODE_MASK << APLL_MODE_SHIFT,
APLL_MODE_SLOW << APLL_MODE_SHIFT);
rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
/* waiting for pll lock */
while (!(readl(&grf->soc_status[1]) & SOCSTS_APLL_LOCK))
udelay(1);
/*
* core clock pll source selection and
* set up dependent divisors for MPAXI/M0AXI and ARM clocks.
* core clock select apll, apll clk = 1800MHz
* arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz
*/
rk_clrsetreg(&cru->cru_clksel_con[0],
CORE_SEL_PLL_MASK << CORE_SEL_PLL_SHIFT |
A17_DIV_MASK << A17_DIV_SHIFT |
MP_DIV_MASK << MP_DIV_SHIFT |
M0_DIV_MASK << M0_DIV_SHIFT,
0 << A17_DIV_SHIFT |
3 << MP_DIV_SHIFT |
1 << M0_DIV_SHIFT);
/*
* set up dependent divisors for L2RAM/ATCLK and PCLK clocks.
* l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz
*/
rk_clrsetreg(&cru->cru_clksel_con[37],
CLK_L2RAM_DIV_MASK << CLK_L2RAM_DIV_SHIFT |
ATCLK_CORE_DIV_CON_MASK << ATCLK_CORE_DIV_CON_SHIFT |
PCLK_CORE_DBG_DIV_MASK >> PCLK_CORE_DBG_DIV_SHIFT,
1 << CLK_L2RAM_DIV_SHIFT |
3 << ATCLK_CORE_DIV_CON_SHIFT |
3 << PCLK_CORE_DBG_DIV_SHIFT);
/* PLL enter normal-mode */
rk_clrsetreg(&cru->cru_mode_con,
APLL_MODE_MASK << APLL_MODE_SHIFT,
APLL_MODE_NORMAL << APLL_MODE_SHIFT);
}
/* Get pll rate by id */
static uint32_t rkclk_pll_get_rate(struct rk3288_cru *cru,
enum rk_clk_id clk_id)
{
uint32_t nr, no, nf;
uint32_t con;
int pll_id = rk_pll_id(clk_id);
struct rk3288_pll *pll = &cru->pll[pll_id];
static u8 clk_shift[CLK_COUNT] = {
0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
GPLL_MODE_SHIFT, NPLL_MODE_SHIFT
};
uint shift;
con = readl(&cru->cru_mode_con);
shift = clk_shift[clk_id];
switch ((con >> shift) & APLL_MODE_MASK) {
case APLL_MODE_SLOW:
return OSC_HZ;
case APLL_MODE_NORMAL:
/* normal mode */
con = readl(&pll->con0);
no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1;
nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1;
con = readl(&pll->con1);
nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1;
return (24 * nf / (nr * no)) * 1000000;
case APLL_MODE_DEEP:
default:
return 32768;
}
}
static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint gclk_rate,
int periph)
{
uint src_rate;
uint div, mux;
u32 con;
switch (periph) {
case HCLK_EMMC:
con = readl(&cru->cru_clksel_con[12]);
mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK;
div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
break;
case HCLK_SDMMC:
con = readl(&cru->cru_clksel_con[11]);
mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK;
div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
break;
case HCLK_SDIO0:
con = readl(&cru->cru_clksel_con[12]);
mux = (con >> SDIO0_PLL_SHIFT) & SDIO0_PLL_MASK;
div = (con >> SDIO0_DIV_SHIFT) & SDIO0_DIV_MASK;
break;
default:
return -EINVAL;
}
src_rate = mux == EMMC_PLL_SELECT_24MHZ ? OSC_HZ : gclk_rate;
return DIV_TO_RATE(src_rate, div);
}
static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate,
int periph, uint freq)
{
int src_clk_div;
int mux;
debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
src_clk_div = RATE_TO_DIV(gclk_rate, freq);
if (src_clk_div > 0x3f) {
src_clk_div = RATE_TO_DIV(OSC_HZ, freq);
mux = EMMC_PLL_SELECT_24MHZ;
assert((int)EMMC_PLL_SELECT_24MHZ ==
(int)MMC0_PLL_SELECT_24MHZ);
} else {
mux = EMMC_PLL_SELECT_GENERAL;
assert((int)EMMC_PLL_SELECT_GENERAL ==
(int)MMC0_PLL_SELECT_GENERAL);
}
switch (periph) {
case HCLK_EMMC:
rk_clrsetreg(&cru->cru_clksel_con[12],
EMMC_PLL_MASK << EMMC_PLL_SHIFT |
EMMC_DIV_MASK << EMMC_DIV_SHIFT,
mux << EMMC_PLL_SHIFT |
(src_clk_div - 1) << EMMC_DIV_SHIFT);
break;
case HCLK_SDMMC:
rk_clrsetreg(&cru->cru_clksel_con[11],
MMC0_PLL_MASK << MMC0_PLL_SHIFT |
MMC0_DIV_MASK << MMC0_DIV_SHIFT,
mux << MMC0_PLL_SHIFT |
(src_clk_div - 1) << MMC0_DIV_SHIFT);
break;
case HCLK_SDIO0:
rk_clrsetreg(&cru->cru_clksel_con[12],
SDIO0_PLL_MASK << SDIO0_PLL_SHIFT |
SDIO0_DIV_MASK << SDIO0_DIV_SHIFT,
mux << SDIO0_PLL_SHIFT |
(src_clk_div - 1) << SDIO0_DIV_SHIFT);
break;
default:
return -EINVAL;
}
return rockchip_mmc_get_clk(cru, gclk_rate, periph);
}
static ulong rockchip_spi_get_clk(struct rk3288_cru *cru, uint gclk_rate,
int periph)
{
uint div, mux;
u32 con;
switch (periph) {
case SCLK_SPI0:
con = readl(&cru->cru_clksel_con[25]);
mux = (con >> SPI0_PLL_SHIFT) & SPI0_PLL_MASK;
div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK;
break;
case SCLK_SPI1:
con = readl(&cru->cru_clksel_con[25]);
mux = (con >> SPI1_PLL_SHIFT) & SPI1_PLL_MASK;
div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK;
break;
case SCLK_SPI2:
con = readl(&cru->cru_clksel_con[39]);
mux = (con >> SPI2_PLL_SHIFT) & SPI2_PLL_MASK;
div = (con >> SPI2_DIV_SHIFT) & SPI2_DIV_MASK;
break;
default:
return -EINVAL;
}
assert(mux == SPI0_PLL_SELECT_GENERAL);
return DIV_TO_RATE(gclk_rate, div);
}
static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint gclk_rate,
int periph, uint freq)
{
int src_clk_div;
debug("%s: clk_general_rate=%u\n", __func__, gclk_rate);
src_clk_div = RATE_TO_DIV(gclk_rate, freq);
switch (periph) {
case SCLK_SPI0:
rk_clrsetreg(&cru->cru_clksel_con[25],
SPI0_PLL_MASK << SPI0_PLL_SHIFT |
SPI0_DIV_MASK << SPI0_DIV_SHIFT,
SPI0_PLL_SELECT_GENERAL << SPI0_PLL_SHIFT |
src_clk_div << SPI0_DIV_SHIFT);
break;
case SCLK_SPI1:
rk_clrsetreg(&cru->cru_clksel_con[25],
SPI1_PLL_MASK << SPI1_PLL_SHIFT |
SPI1_DIV_MASK << SPI1_DIV_SHIFT,
SPI1_PLL_SELECT_GENERAL << SPI1_PLL_SHIFT |
src_clk_div << SPI1_DIV_SHIFT);
break;
case SCLK_SPI2:
rk_clrsetreg(&cru->cru_clksel_con[39],
SPI2_PLL_MASK << SPI2_PLL_SHIFT |
SPI2_DIV_MASK << SPI2_DIV_SHIFT,
SPI2_PLL_SELECT_GENERAL << SPI2_PLL_SHIFT |
src_clk_div << SPI2_DIV_SHIFT);
break;
default:
return -EINVAL;
}
return rockchip_spi_get_clk(cru, gclk_rate, periph);
}
static ulong rk3288_clk_get_rate(struct clk *clk)
{
struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
ulong new_rate, gclk_rate;
gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
switch (clk->id) {
case 0 ... 63:
new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO0:
new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id);
break;
case SCLK_SPI0:
case SCLK_SPI1:
case SCLK_SPI2:
new_rate = rockchip_spi_get_clk(priv->cru, gclk_rate, clk->id);
break;
case PCLK_I2C0:
case PCLK_I2C1:
case PCLK_I2C2:
case PCLK_I2C3:
case PCLK_I2C4:
case PCLK_I2C5:
return gclk_rate;
case PCLK_PWM:
return PD_BUS_PCLK_HZ;
default:
return -ENOENT;
}
return new_rate;
}
static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
{
struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3288_cru *cru = priv->cru;
ulong new_rate, gclk_rate;
gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
switch (clk->id) {
case PLL_APLL:
/* We only support a fixed rate here */
if (rate != 1800000000)
return -EINVAL;
rk3288_clk_configure_cpu(priv->cru, priv->grf);
new_rate = rate;
break;
case CLK_DDR:
new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate);
break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO0:
new_rate = rockchip_mmc_set_clk(cru, gclk_rate, clk->id, rate);
break;
case SCLK_SPI0:
case SCLK_SPI1:
case SCLK_SPI2:
new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate);
break;
#ifndef CONFIG_SPL_BUILD
case SCLK_MAC:
new_rate = rockchip_mac_set_clk(priv->cru, clk->id, rate);
break;
case DCLK_VOP0:
case DCLK_VOP1:
new_rate = rockchip_vop_set_clk(cru, priv->grf, clk->id, rate);
break;
case SCLK_EDP_24M:
/* clk_edp_24M source: 24M */
rk_setreg(&cru->cru_clksel_con[28], 1 << 15);
/* rst edp */
rk_setreg(&cru->cru_clksel_con[6], 1 << 15);
udelay(1);
rk_clrreg(&cru->cru_clksel_con[6], 1 << 15);
new_rate = rate;
break;
case ACLK_VOP0:
case ACLK_VOP1: {
u32 div;
/* vop aclk source clk: cpll */
div = CPLL_HZ / rate;
assert((div - 1 < 64) && (div * rate == CPLL_HZ));
switch (clk->id) {
case ACLK_VOP0:
rk_clrsetreg(&cru->cru_clksel_con[31],
3 << 6 | 0x1f << 0,
0 << 6 | (div - 1) << 0);
break;
case ACLK_VOP1:
rk_clrsetreg(&cru->cru_clksel_con[31],
3 << 14 | 0x1f << 8,
0 << 14 | (div - 1) << 8);
break;
}
new_rate = rate;
break;
}
case PCLK_HDMI_CTRL:
/* enable pclk hdmi ctrl */
rk_clrreg(&cru->cru_clkgate_con[16], 1 << 9);
/* software reset hdmi */
rk_setreg(&cru->cru_clkgate_con[7], 1 << 9);
udelay(1);
rk_clrreg(&cru->cru_clkgate_con[7], 1 << 9);
new_rate = rate;
break;
#endif
default:
return -ENOENT;
}
return new_rate;
}
static struct clk_ops rk3288_clk_ops = {
.get_rate = rk3288_clk_get_rate,
.set_rate = rk3288_clk_set_rate,
};
static int rk3288_clk_ofdata_to_platdata(struct udevice *dev)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3288_clk_priv *priv = dev_get_priv(dev);
priv->cru = (struct rk3288_cru *)dev_get_addr(dev);
#endif
return 0;
}
static int rk3288_clk_probe(struct udevice *dev)
{
struct rk3288_clk_priv *priv = dev_get_priv(dev);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(priv->grf))
return PTR_ERR(priv->grf);
#ifdef CONFIG_SPL_BUILD
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3288_clk_plat *plat = dev_get_platdata(dev);
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
rkclk_init(priv->cru, priv->grf);
#endif
return 0;
}
static int rk3288_clk_bind(struct udevice *dev)
{
int ret;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rk3288_sysreset", "reset", &dev);
if (ret)
debug("Warning: No RK3288 reset driver: ret=%d\n", ret);
return 0;
}
static const struct udevice_id rk3288_clk_ids[] = {
{ .compatible = "rockchip,rk3288-cru" },
{ }
};
U_BOOT_DRIVER(rockchip_rk3288_cru) = {
.name = "rockchip_rk3288_cru",
.id = UCLASS_CLK,
.of_match = rk3288_clk_ids,
.priv_auto_alloc_size = sizeof(struct rk3288_clk_priv),
.platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat),
.ops = &rk3288_clk_ops,
.bind = rk3288_clk_bind,
.ofdata_to_platdata = rk3288_clk_ofdata_to_platdata,
.probe = rk3288_clk_probe,
};