blob: 4ed2ebb5165d8f2f0e0e8a79d90d8f282aa68b7a [file] [log] [blame]
/*
* Copyright 2017 NXP
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/imx-common/sci/sci.h>
#include <ahci.h>
#include <scsi.h>
#include <imx8_hsio.h>
int sata_init(void)
{
int ret;
u32 val, i = 0;
printf("start sata init\n");
writel(0x22222222, GPR_LPCG_PHYX2APB_0_APB);
writel(0x22222222, GPR_LPCG_PHYX1_APB);
setbits_le32(0x5F130008, BIT(21));
setbits_le32(0x5F130008, BIT(23));
/* PHY_MODE to SATA100Mhz ref clk */
setbits_le32(HW_PHYX1_CTRL0_ADDR, BIT(19));
/*
* bit 0 rx ena, bit 1 tx ena, bit 11 fast_init,
* bit12 PHY_X1_EPCS_SEL 1.
*/
setbits_le32(HW_MISC_CTRL0_ADDR, HW_MISC_CTRL0_IOB_RXENA
| HW_MISC_CTRL0_PHY_X1_EPCS_SEL);
clrbits_le32(HW_SATA_CTRL0_ADDR, HW_SATA_CTRL0_PHY_RESET);
setbits_le32(HW_SATA_CTRL0_ADDR, HW_SATA_CTRL0_PHY_RESET);
setbits_le32(HW_SATA_CTRL0_ADDR, HW_SATA_CTRL0_RESET);
udelay(1);
clrbits_le32(HW_SATA_CTRL0_ADDR, HW_SATA_CTRL0_RESET);
setbits_le32(HW_SATA_CTRL0_ADDR, HW_SATA_CTRL0_RESET);
setbits_le32(HW_PHYX1_CTRL0_ADDR, HW_PHYX1_CTRL0_APB_RSTN);
for (i = 0; i < 100; i++) {
val = readl(HW_PHYX1_STTS0_ADDR);
val &= HW_PHYX1_STTS0_LANE0_TX_PLL_LOCK;
if (val == HW_PHYX1_STTS0_LANE0_TX_PLL_LOCK)
break;
udelay(1);
}
if (val != HW_PHYX1_STTS0_LANE0_TX_PLL_LOCK) {
printf("TX PLL is not locked.\n");
return -ENODEV;
}
ret = ahci_init((void __iomem *)AHCI_BASE_ADDR);
if (ret)
return ret;
scsi_scan(1);
return 0;
}