blob: c09d89089c16e539c5c1e9fa6c56cdc321c83a2b [file] [log] [blame]
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015-2017 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/io.h>
#include "../init.h"
#include "sbc-regs.h"
#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000
#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500
#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020
#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000
#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500
#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010
/* slower but LED works */
#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00
#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110
/* faster but LED does not work */
#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700
/* NOR flash needs more wait counts than SRAM */
#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210
static void __uniphier_sbc_init(int savepin)
{
/*
* Only CS1 is connected to support card.
* BKSZ[1:0] should be set to "01".
*/
if (savepin) {
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
} else {
writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
}
if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
* 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
* 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
* 0x40000000-0x41ffffff: mask ROM
* 0x42000000-0x43efffff: memory bank (31MB)
* 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
}
void uniphier_sbc_init_admulti(void)
{
__uniphier_sbc_init(0);
}
void uniphier_sbc_init_savepin(void)
{
__uniphier_sbc_init(1);
}