blob: 49afe91c24eff576e81adcb87e02e1ed78023235 [file] [log] [blame] [edit]
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <libfdt.h>
#include <linux/err.h>
#include <linux/list.h>
#include <dm/device.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <dm/uclass.h>
DECLARE_GLOBAL_DATA_PTR;
int pinctrl_decode_pin_config(const void *blob, int node)
{
int flags = 0;
if (fdtdec_get_bool(blob, node, "bias-pull-up"))
flags |= 1 << PIN_CONFIG_BIAS_PULL_UP;
else if (fdtdec_get_bool(blob, node, "bias-pull-down"))
flags |= 1 << PIN_CONFIG_BIAS_PULL_DOWN;
return flags;
}
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
/**
* pinctrl_config_one() - apply pinctrl settings for a single node
*
* @config: pin configuration node
* @return: 0 on success, or negative error code on failure
*/
static int pinctrl_config_one(struct udevice *config)
{
struct udevice *pctldev;
const struct pinctrl_ops *ops;
pctldev = config;
for (;;) {
pctldev = dev_get_parent(pctldev);
if (!pctldev) {
dev_err(config, "could not find pctldev\n");
return -EINVAL;
}
if (pctldev->uclass->uc_drv->id == UCLASS_PINCTRL)
break;
}
ops = pinctrl_get_ops(pctldev);
return ops->set_state(pctldev, config);
}
/**
* pinctrl_select_state_full() - full implementation of pinctrl_select_state
*
* @dev: peripheral device
* @statename: state name, like "default"
* @return: 0 on success, or negative error code on failure
*/
static int pinctrl_select_state_full(struct udevice *dev, const char *statename)
{
const void *fdt = gd->fdt_blob;
int node = dev_of_offset(dev);
char propname[32]; /* long enough */
const fdt32_t *list;
uint32_t phandle;
int config_node;
struct udevice *config;
int state, size, i, ret;
state = fdt_stringlist_search(fdt, node, "pinctrl-names", statename);
if (state < 0) {
char *end;
/*
* If statename is not found in "pinctrl-names",
* assume statename is just the integer state ID.
*/
state = simple_strtoul(statename, &end, 10);
if (*end)
return -EINVAL;
}
snprintf(propname, sizeof(propname), "pinctrl-%d", state);
list = fdt_getprop(fdt, node, propname, &size);
if (!list)
return -EINVAL;
size /= sizeof(*list);
for (i = 0; i < size; i++) {
phandle = fdt32_to_cpu(*list++);
config_node = fdt_node_offset_by_phandle(fdt, phandle);
if (config_node < 0) {
dev_err(dev, "prop %s index %d invalid phandle\n",
propname, i);
return -EINVAL;
}
ret = uclass_get_device_by_of_offset(UCLASS_PINCONFIG,
config_node, &config);
if (ret)
return ret;
ret = pinctrl_config_one(config);
if (ret)
return ret;
}
return 0;
}
/**
* pinconfig_post_bind() - post binding for PINCONFIG uclass
* Recursively bind its children as pinconfig devices.
*
* @dev: pinconfig device
* @return: 0 on success, or negative error code on failure
*/
static int pinconfig_post_bind(struct udevice *dev)
{
const void *fdt = gd->fdt_blob;
int offset = dev_of_offset(dev);
bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
const char *name;
int ret;
for (offset = fdt_first_subnode(fdt, offset);
offset > 0;
offset = fdt_next_subnode(fdt, offset)) {
if (pre_reloc_only &&
!fdt_getprop(fdt, offset, "u-boot,dm-pre-reloc", NULL))
continue;
/*
* If this node has "compatible" property, this is not
* a pin configuration node, but a normal device. skip.
*/
fdt_get_property(fdt, offset, "compatible", &ret);
if (ret >= 0)
continue;
if (ret != -FDT_ERR_NOTFOUND)
return ret;
name = fdt_get_name(fdt, offset, NULL);
if (!name)
return -EINVAL;
ret = device_bind_driver_to_node(dev, "pinconfig", name,
offset, NULL);
if (ret)
return ret;
}
return 0;
}
UCLASS_DRIVER(pinconfig) = {
.id = UCLASS_PINCONFIG,
.post_bind = pinconfig_post_bind,
.name = "pinconfig",
};
U_BOOT_DRIVER(pinconfig_generic) = {
.name = "pinconfig",
.id = UCLASS_PINCONFIG,
};
#else
static int pinctrl_select_state_full(struct udevice *dev, const char *statename)
{
return -ENODEV;
}
static int pinconfig_post_bind(struct udevice *dev)
{
return 0;
}
#endif
/**
* pinctrl_select_state_simple() - simple implementation of pinctrl_select_state
*
* @dev: peripheral device
* @return: 0 on success, or negative error code on failure
*/
static int pinctrl_select_state_simple(struct udevice *dev)
{
struct udevice *pctldev;
struct pinctrl_ops *ops;
int ret;
/*
* For simplicity, assume the first device of PINCTRL uclass
* is the correct one. This is most likely OK as there is
* usually only one pinctrl device on the system.
*/
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pctldev);
if (ret)
return ret;
ops = pinctrl_get_ops(pctldev);
if (!ops->set_state_simple) {
dev_dbg(dev, "set_state_simple op missing\n");
return -ENOSYS;
}
return ops->set_state_simple(pctldev, dev);
}
int pinctrl_select_state(struct udevice *dev, const char *statename)
{
/*
* Try full-implemented pinctrl first.
* If it fails or is not implemented, try simple one.
*/
if (pinctrl_select_state_full(dev, statename))
return pinctrl_select_state_simple(dev);
return 0;
}
int pinctrl_request(struct udevice *dev, int func, int flags)
{
struct pinctrl_ops *ops = pinctrl_get_ops(dev);
if (!ops->request)
return -ENOSYS;
return ops->request(dev, func, flags);
}
int pinctrl_request_noflags(struct udevice *dev, int func)
{
return pinctrl_request(dev, func, 0);
}
int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph)
{
struct pinctrl_ops *ops = pinctrl_get_ops(dev);
if (!ops->get_periph_id)
return -ENOSYS;
return ops->get_periph_id(dev, periph);
}
int pinctrl_get_gpio_mux(struct udevice *dev, int banknum, int index)
{
struct pinctrl_ops *ops = pinctrl_get_ops(dev);
if (!ops->get_gpio_mux)
return -ENOSYS;
return ops->get_gpio_mux(dev, banknum, index);
}
/**
* pinconfig_post_bind() - post binding for PINCTRL uclass
* Recursively bind child nodes as pinconfig devices in case of full pinctrl.
*
* @dev: pinctrl device
* @return: 0 on success, or negative error code on failure
*/
static int pinctrl_post_bind(struct udevice *dev)
{
const struct pinctrl_ops *ops = pinctrl_get_ops(dev);
if (!ops) {
dev_dbg(dev, "ops is not set. Do not bind.\n");
return -EINVAL;
}
/*
* If set_state callback is set, we assume this pinctrl driver is the
* full implementation. In this case, its child nodes should be bound
* so that peripheral devices can easily search in parent devices
* during later DT-parsing.
*/
if (ops->set_state)
return pinconfig_post_bind(dev);
return 0;
}
UCLASS_DRIVER(pinctrl) = {
.id = UCLASS_PINCTRL,
.post_bind = pinctrl_post_bind,
.flags = DM_UC_FLAG_SEQ_ALIAS,
.name = "pinctrl",
};