| /* |
| * |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <netdev.h> |
| |
| #include <asm/immap.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ccm_t *ccm = (ccm_t *) MMAP_CCM; |
| |
| out_8(&ccm->rcr, CCM_RCR_SOFTRST); |
| /* we don't return! */ |
| return 0; |
| } |
| |
| int checkcpu(void) |
| { |
| ccm_t *ccm = (ccm_t *) MMAP_CCM; |
| u16 msk; |
| u16 id = 0; |
| u8 ver; |
| |
| puts("CPU: "); |
| msk = (in_be16(&ccm->cir) >> 6); |
| ver = (in_be16(&ccm->cir) & 0x003f); |
| switch (msk) { |
| case 0x31: |
| id = 5235; |
| break; |
| } |
| |
| if (id) { |
| char buf1[32], buf2[32]; |
| |
| printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, |
| ver); |
| printf(" CPU CLK %s MHz BUS CLK %s MHz\n", |
| strmhz(buf1, gd->cpu_clk), |
| strmhz(buf2, gd->bus_clk)); |
| } |
| |
| return 0; |
| }; |
| |
| #if defined(CONFIG_WATCHDOG) |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| |
| /* Count register */ |
| out_be16(&wdp->sr, 0x5555); |
| asm("nop"); |
| out_be16(&wdp->sr, 0xaaaa); |
| } |
| |
| int watchdog_disable(void) |
| { |
| wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| |
| /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ |
| /* halted watchdog timer */ |
| setbits_be16(&wdp->cr, WTM_WCR_HALTED); |
| |
| puts("WATCHDOG:disabled\n"); |
| return (0); |
| } |
| |
| int watchdog_init(void) |
| { |
| wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| u32 wdog_module = 0; |
| |
| /* set timeout and enable watchdog */ |
| wdog_module = ((CONFIG_SYS_CLK / CONFIG_SYS_HZ) * CONFIG_WATCHDOG_TIMEOUT); |
| wdog_module |= (wdog_module / 8192); |
| out_be16(&wdp->mr, wdog_module); |
| |
| out_be16(&wdp->cr, WTM_WCR_EN); |
| puts("WATCHDOG:enabled\n"); |
| |
| return (0); |
| } |
| #endif /* CONFIG_WATCHDOG */ |
| |
| #if defined(CONFIG_MCFFEC) |
| /* Default initializations for MCFFEC controllers. To override, |
| * create a board-specific function called: |
| * int board_eth_init(bd_t *bis) |
| */ |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| return mcffec_initialize(bis); |
| } |
| #endif |