include/configs/mx6sxsabreauto.h - uboot-imx - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  * Copyright 2019 NXP
  *
  * Configuration settings for the Freescale i.MX6SX Sabreauto board.
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include "mx6_common.h"
 #include "imx_env.h"

 #define CONFIG_DBG_MONITOR

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)

 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE

 #ifdef CONFIG_NAND_BOOT
 #define MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(nandboot),16m(nandkernel),16m(nanddtb),16m(nandtee),-(nandrootfs) "
 #else
 #define MFG_NAND_PARTITION ""
 #endif

 #ifdef CONFIG_IMX_BOOTAUX

 /* Set to QSPI1 B flash at default */
 #ifdef CONFIG_DM_SPI
 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x68000000
 #define SF_QSPI1_B_CS_NUM 2
 #else
 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x62000000
 #define SF_QSPI1_B_CS_NUM 1
 #endif


 #define UPDATE_M4_ENV \
 	"m4image=m4_qspi.bin\0" \
 	"m4_qspi_cs="__stringify(SF_QSPI1_B_CS_NUM)"\0" \
 	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
 	"update_m4_from_sd=" \
 		"if sf probe 0:${m4_qspi_cs}; then " \
 			"if run loadm4image; then " \
 				"setexpr fw_sz ${filesize} + 0xffff; " \
 				"setexpr fw_sz ${fw_sz} / 0x10000; "	\
 				"setexpr fw_sz ${fw_sz} * 0x10000; "	\
 				"sf erase 0x0 ${fw_sz}; " \
 				"sf write ${loadaddr} 0x0 ${filesize}; " \
 			"fi; " \
 		"fi\0" \
 	"m4boot=sf probe 0:${m4_qspi_cs}; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
 #else
 #define UPDATE_M4_ENV ""
 #endif


 #define CONFIG_MFG_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS_DEFAULT \
 	"initrd_addr=0x86800000\0" \
 	"initrd_high=0xffffffff\0" \
 	"sd_dev=2\0" \
 	"mtdparts=" MFG_NAND_PARTITION \
 	"\0"\

 #if defined(CONFIG_NAND_BOOT)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
 	TEE_ENV \
 	"tee_addr=0x84000000\0" \
 	"panel=Hannstar-XGA\0" \
 	"fdt_addr=0x83000000\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"console=ttymxc0\0" \
 	"bootargs=console=ttymxc0,115200 ubi.mtd=6 "  \
 		"root=ubi0:nandrootfs rootfstype=ubifs "		     \
 		MFG_NAND_PARTITION \
 		"\0" \
 	"bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\
 		"nand read ${fdt_addr} 0x5000000 0x100000;"\
 		"if test ${tee} = yes; then " \
 			"nand read ${tee_addr} 0x6000000 0x400000;"\
 			"bootm ${tee_addr} - ${fdt_addr};" \
 		"else " \
 			"bootz ${loadaddr} - ${fdt_addr};" \
 		"fi\0"

 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	UPDATE_M4_ENV \
 	CONFIG_MFG_ENV_SETTINGS \
 	TEE_ENV \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=undefined\0" \
 	"fdt_addr=0x83000000\0" \
 	"tee_addr=0x84000000\0" \
 	"tee_file=uTee-6sxauto\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"panel=Hannstar-XGA\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"loadtee=fatload mmc ${mmcdev}:${mmcpart} ${tee_addr} ${tee_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${tee} = yes; then " \
 			"run loadfdt; run loadtee; bootm ${tee_addr} - ${fdt_addr}; " \
 		"else " \
 			"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 				"if run loadfdt; then " \
 					"bootz ${loadaddr} - ${fdt_addr}; " \
 				"else " \
 					"if test ${boot_fdt} = try; then " \
 						"bootz; " \
 					"else " \
 						"echo WARN: Cannot load the DT; " \
 					"fi; " \
 				"fi; " \
 			"else " \
 				"bootz; " \
 			"fi; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 		"netboot=echo Booting from net ...; " \
 		"run netargs; " \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${image}; " \
 		"if test ${tee} = yes; then " \
 			"${get_cmd} ${tee_addr} ${tee_file}; " \
 			"${get_cmd} ${fdt_addr} ${fdt_file}; " \
 			"bootm ${tee_addr} - ${fdt_addr}; " \
 		"else " \
 			"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 				"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 					"bootz ${loadaddr} - ${fdt_addr}; " \
 				"else " \
 					"if test ${boot_fdt} = try; then " \
 						"bootz; " \
 					"else " \
 						"echo WARN: Cannot load the DT; " \
 					"fi; " \
 				"fi; " \
 			"else " \
 				"bootz; " \
 			"fi;" \
 		"fi;\0" \
 	"findfdt="\
 		"if test $fdt_file = undefined; then " \
 			"setenv fdt_file imx6sx-sabreauto.dtb; " \
 		"fi;\0" \

 #define CONFIG_BOOTCOMMAND \
 	   "run findfdt;" \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
 		   "else " \
 			   "if run loadimage; then " \
 				   "run mmcboot; " \
 			   "else run netboot; " \
 			   "fi; " \
 		   "fi; " \
 	   "else run netboot; fi"
 #endif

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)

 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* MMC Configuration */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC3_BASE_ADDR

 /* I2C Configs */
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000

 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION

 /* DMA stuff, needed for GPMI/MXS NAND support */

 /* Network */

 #define CONFIG_FEC_MXC

 #define CONFIG_FEC_ENET_DEV 1  /* Use onboard ethernet as default */

 #if (CONFIG_FEC_ENET_DEV == 0)
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x1
 #ifdef CONFIG_DM_ETH
 #define CONFIG_ETHPRIME                 "eth0"
 #else
 #define CONFIG_ETHPRIME                 "FEC0"
 #endif
 #elif (CONFIG_FEC_ENET_DEV == 1)
 #define IMX_FEC_BASE			ENET2_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x0
 #ifdef CONFIG_DM_ETH
 #define CONFIG_ETHPRIME                 "eth1"
 #else
 #define CONFIG_ETHPRIME                 "FEC1"
 #endif
 #endif

 #define CONFIG_FEC_XCV_TYPE             RGMII

 #define CONFIG_PHY_ATHEROS
 #define CONFIG_FEC_MXC_MDIO_BASE	ENET_BASE_ADDR

 #define CONFIG_SERIAL_TAG

 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif

 #define CONFIG_IMX_THERMAL

 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SYS_FSL_QSPI_AHB
 #define FSL_QSPI_FLASH_SIZE		SZ_32M
 #define FSL_QSPI_FLASH_NUM		2
 #endif

 #define CONFIG_ENV_SIZE			SZ_8K

 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_MMCROOT			"/dev/mmcblk2p2"  /* USDHC3 */
 #define CONFIG_SYS_MMC_ENV_DEV		2  /*USDHC3*/
 #define CONFIG_SYS_MMC_ENV_PART		0	/* user area */

 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(14 * SZ_64K)
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_ENV_OFFSET		(896 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(64 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #elif defined(CONFIG_ENV_IS_IN_NAND)
 #undef CONFIG_ENV_SIZE
 #define CONFIG_ENV_OFFSET		(60 << 20)
 #define CONFIG_ENV_SECT_SIZE		(128 << 10)
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #endif

 #ifndef CONFIG_DM_PCA953X
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
 #endif

 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_GIS
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_SYS_CONSOLE_BG_COL            0x00
 #define CONFIG_SYS_CONSOLE_FG_COL            0xa0
 #ifdef CONFIG_VIDEO_GIS
 #define CONFIG_VIDEO_CSI
 #define CONFIG_VIDEO_PXP
 #define CONFIG_VIDEO_VADC
 #endif
 #endif

 #endif				/* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2014 Freescale Semiconductor, Inc.
	* Copyright 2019 NXP
	*
	* Configuration settings for the Freescale i.MX6SX Sabreauto board.
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include "mx6_common.h"
	#include "imx_env.h"

	#define CONFIG_DBG_MONITOR

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART1_BASE

	#ifdef CONFIG_NAND_BOOT
	#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(nandboot),16m(nandkernel),16m(nanddtb),16m(nandtee),-(nandrootfs) "
	#else
	#define MFG_NAND_PARTITION ""
	#endif

	#ifdef CONFIG_IMX_BOOTAUX

	/* Set to QSPI1 B flash at default */
	#ifdef CONFIG_DM_SPI
	#define CONFIG_SYS_AUXCORE_BOOTDATA 0x68000000
	#define SF_QSPI1_B_CS_NUM 2
	#else
	#define CONFIG_SYS_AUXCORE_BOOTDATA 0x62000000
	#define SF_QSPI1_B_CS_NUM 1
	#endif


	#define UPDATE_M4_ENV \
	"m4image=m4_qspi.bin\0" \
	"m4_qspi_cs="__stringify(SF_QSPI1_B_CS_NUM)"\0" \
	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
	"update_m4_from_sd=" \
	"if sf probe 0:${m4_qspi_cs}; then " \
	"if run loadm4image; then " \
	"setexpr fw_sz ${filesize} + 0xffff; " \
	"setexpr fw_sz ${fw_sz} / 0x10000; " \
	"setexpr fw_sz ${fw_sz} * 0x10000; " \
	"sf erase 0x0 ${fw_sz}; " \
	"sf write ${loadaddr} 0x0 ${filesize}; " \
	"fi; " \
	"fi\0" \
	"m4boot=sf probe 0:${m4_qspi_cs}; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
	#else
	#define UPDATE_M4_ENV ""
	#endif


	#define CONFIG_MFG_ENV_SETTINGS \
	CONFIG_MFG_ENV_SETTINGS_DEFAULT \
	"initrd_addr=0x86800000\0" \
	"initrd_high=0xffffffff\0" \
	"sd_dev=2\0" \
	"mtdparts=" MFG_NAND_PARTITION \
	"\0"\

	#if defined(CONFIG_NAND_BOOT)
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_MFG_ENV_SETTINGS \
	TEE_ENV \
	"tee_addr=0x84000000\0" \
	"panel=Hannstar-XGA\0" \
	"fdt_addr=0x83000000\0" \
	"fdt_high=0xffffffff\0" \
	"console=ttymxc0\0" \
	"bootargs=console=ttymxc0,115200 ubi.mtd=6 " \
	"root=ubi0:nandrootfs rootfstype=ubifs " \
	MFG_NAND_PARTITION \
	"\0" \
	"bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\
	"nand read ${fdt_addr} 0x5000000 0x100000;"\
	"if test ${tee} = yes; then " \
	"nand read ${tee_addr} 0x6000000 0x400000;"\
	"bootm ${tee_addr} - ${fdt_addr};" \
	"else " \
	"bootz ${loadaddr} - ${fdt_addr};" \
	"fi\0"

	#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	UPDATE_M4_ENV \
	CONFIG_MFG_ENV_SETTINGS \
	TEE_ENV \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=undefined\0" \
	"fdt_addr=0x83000000\0" \
	"tee_addr=0x84000000\0" \
	"tee_file=uTee-6sxauto\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"panel=Hannstar-XGA\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"loadbootscript=" \
	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"loadtee=fatload mmc ${mmcdev}:${mmcpart} ${tee_addr} ${tee_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"if test ${tee} = yes; then " \
	"run loadfdt; run loadtee; bootm ${tee_addr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi; " \
	"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${tee} = yes; then " \
	"${get_cmd} ${tee_addr} ${tee_file}; " \
	"${get_cmd} ${fdt_addr} ${fdt_file}; " \
	"bootm ${tee_addr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;" \
	"fi;\0" \
	"findfdt="\
	"if test $fdt_file = undefined; then " \
	"setenv fdt_file imx6sx-sabreauto.dtb; " \
	"fi;\0" \

	#define CONFIG_BOOTCOMMAND \
	"run findfdt;" \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loadimage; then " \
	"run mmcboot; " \
	"else run netboot; " \
	"fi; " \
	"fi; " \
	"else run netboot; fi"
	#endif

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_MEMTEST_START 0x80000000
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)

	/* Physical Memory Map */
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* MMC Configuration */
	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR

	/* I2C Configs */
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_I2C_SPEED 100000

	/* NAND stuff */
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_ONFI_DETECTION

	/* DMA stuff, needed for GPMI/MXS NAND support */

	/* Network */

	#define CONFIG_FEC_MXC

	#define CONFIG_FEC_ENET_DEV 1 /* Use onboard ethernet as default */

	#if (CONFIG_FEC_ENET_DEV == 0)
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_MXC_PHYADDR 0x1
	#ifdef CONFIG_DM_ETH
	#define CONFIG_ETHPRIME "eth0"
	#else
	#define CONFIG_ETHPRIME "FEC0"
	#endif
	#elif (CONFIG_FEC_ENET_DEV == 1)
	#define IMX_FEC_BASE ENET2_BASE_ADDR
	#define CONFIG_FEC_MXC_PHYADDR 0x0
	#ifdef CONFIG_DM_ETH
	#define CONFIG_ETHPRIME "eth1"
	#else
	#define CONFIG_ETHPRIME "FEC1"
	#endif
	#endif

	#define CONFIG_FEC_XCV_TYPE RGMII

	#define CONFIG_PHY_ATHEROS
	#define CONFIG_FEC_MXC_MDIO_BASE ENET_BASE_ADDR

	#define CONFIG_SERIAL_TAG

	#ifdef CONFIG_CMD_USB
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#endif

	#define CONFIG_IMX_THERMAL

	#ifdef CONFIG_FSL_QSPI
	#define CONFIG_SYS_FSL_QSPI_AHB
	#define FSL_QSPI_FLASH_SIZE SZ_32M
	#define FSL_QSPI_FLASH_NUM 2
	#endif

	#define CONFIG_ENV_SIZE SZ_8K

	#define CONFIG_SYS_FSL_USDHC_NUM 2
	#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
	#define CONFIG_SYS_MMC_ENV_DEV 2 /USDHC3/
	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */

	#if defined(CONFIG_ENV_IS_IN_MMC)
	#define CONFIG_ENV_OFFSET (14 * SZ_64K)
	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	#define CONFIG_ENV_OFFSET (896 * 1024)
	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#elif defined(CONFIG_ENV_IS_IN_NAND)
	#undef CONFIG_ENV_SIZE
	#define CONFIG_ENV_OFFSET (60 << 20)
	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	#endif

	#ifndef CONFIG_DM_PCA953X
	#define CONFIG_PCA953X
	#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
	#endif

	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_GIS
	#define CONFIG_VIDEO_MXS
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_CMD_BMP
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_IMX_VIDEO_SKIP
	#define CONFIG_SYS_CONSOLE_BG_COL 0x00
	#define CONFIG_SYS_CONSOLE_FG_COL 0xa0
	#ifdef CONFIG_VIDEO_GIS
	#define CONFIG_VIDEO_CSI
	#define CONFIG_VIDEO_PXP
	#define CONFIG_VIDEO_VADC
	#endif
	#endif

	#endif /* __CONFIG_H */