| Overview |
| -------- |
| QorIQ LS1012A Development System (LS1012AQDS) is a high-performance |
| development platform, with a complete debugging environment. |
| The LS1012AQDS board supports the QorIQ LS1012A processor and is |
| optimized to support the high-bandwidth DDR3L memory and |
| a full complement of high-speed SerDes ports. |
| |
| LS1012A SoC Overview |
| -------------------- |
| Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A |
| SoC overview. |
| |
| LS1012AQDS board Overview |
| ----------------------- |
| - SERDES Connections, 4 lanes supporting: |
| - PCI Express - 3.0 |
| - SGMII, SGMII 2.5 |
| - SATA 3.0 |
| - DDR Controller |
| - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s |
| - QSPI Controller |
| - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select |
| signals to QSPI NOR flash memory (2 virtual banks) and the QSPI |
| emulator |
| - USB 3.0 |
| - One USB 3.0 controller with integrated PHY |
| - One high-speed USB 3.0 port |
| - USB 2.0 |
| - One USB 2.0 controller with ULPI interface |
| - Two enhanced secure digital host controllers: |
| - SDHC1 controller can be connected to onboard SDHC connector |
| - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices |
| - 2 I2C controllers |
| - One SATA onboard connectors |
| - UART |
| - 5 SAI |
| - One SAI port with audio codec SGTL5000: |
| • Provides MIC bias |
| • Provides headphone and line output |
| - One SAI port terminated at 2x6 header |
| - Three SAI Tx/Rx ports terminated at 2x3 headers |
| - ARM JTAG support |
| |
| Booting Options |
| --------------- |
| a) QSPI Flash Emu Boot |
| b) QSPI Flash 1 |
| c) QSPI Flash 2 |
| |
| QSPI flash map |
| -------------- |
| Images | Size |QSPI Flash Address |
| ------------------------------------------ |
| RCW + PBI | 1MB | 0x4000_0000 |
| U-boot | 1MB | 0x4010_0000 |
| U-boot Env | 1MB | 0x4020_0000 |
| PPA FIT image | 2MB | 0x4050_0000 |
| Linux ITB | ~53MB | 0x40A0_0000 |
