| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * mux.c |
| * |
| * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/mux.h> |
| #include <asm/io.h> |
| #include "board.h" |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart1_pin_mux[] = { |
| {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ |
| {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart2_pin_mux[] = { |
| {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ |
| {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart3_pin_mux[] = { |
| {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ |
| {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart4_pin_mux[] = { |
| {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ |
| {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux uart5_pin_mux[] = { |
| {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ |
| {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux i2c0_pin_mux[] = { |
| {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | |
| PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ |
| {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | |
| PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ |
| {-1}, |
| }; |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |
| |
| void enable_uart1_pin_mux(void) |
| { |
| configure_module_pin_mux(uart1_pin_mux); |
| } |
| |
| void enable_uart2_pin_mux(void) |
| { |
| configure_module_pin_mux(uart2_pin_mux); |
| } |
| |
| void enable_uart3_pin_mux(void) |
| { |
| configure_module_pin_mux(uart3_pin_mux); |
| } |
| |
| void enable_uart4_pin_mux(void) |
| { |
| configure_module_pin_mux(uart4_pin_mux); |
| } |
| |
| void enable_uart5_pin_mux(void) |
| { |
| configure_module_pin_mux(uart5_pin_mux); |
| } |
| |
| void enable_uart_pin_mux(u32 addr) |
| { |
| switch (addr) { |
| case CONFIG_SYS_NS16550_COM1: |
| enable_uart0_pin_mux(); |
| break; |
| case CONFIG_SYS_NS16550_COM2: |
| enable_uart1_pin_mux(); |
| break; |
| case CONFIG_SYS_NS16550_COM3: |
| enable_uart2_pin_mux(); |
| break; |
| case CONFIG_SYS_NS16550_COM4: |
| enable_uart3_pin_mux(); |
| break; |
| case CONFIG_SYS_NS16550_COM5: |
| enable_uart4_pin_mux(); |
| break; |
| case CONFIG_SYS_NS16550_COM6: |
| enable_uart5_pin_mux(); |
| break; |
| } |
| } |
| |
| void enable_i2c0_pin_mux(void) |
| { |
| configure_module_pin_mux(i2c0_pin_mux); |
| } |