| if TI816X |
| |
| config TARGET_TI816X_EVM |
| bool "Support ti816x_evm" |
| help |
| This option specifies support for the TI8168 EVM development platform |
| with PG2.0 silicon and DDR3 DRAM. |
| |
| endif |
| |
| if TI814X |
| |
| config TARGET_TI814X_EVM |
| bool "Support ti814x_evm" |
| help |
| This option specifies support for the TI8148 |
| EVM development platform. |
| |
| endif |
| |
| if AM33XX |
| |
| config AM33XX_CHILISOM |
| bool |
| select SUPPORT_SPL |
| |
| choice |
| prompt "AM33xx board select" |
| |
| config TARGET_AM335X_EVM |
| bool "Support am335x_evm" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| select TI_I2C_BOARD_DETECT |
| imply CMD_DM |
| imply SPL_DM |
| imply SPL_DM_SEQ_ALIAS |
| imply SPL_ENV_SUPPORT |
| imply SPL_FS_EXT4 |
| imply SPL_FS_FAT |
| imply SPL_GPIO_SUPPORT |
| imply SPL_I2C_SUPPORT |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC_SUPPORT |
| imply SPL_NAND_SUPPORT |
| imply SPL_OF_LIBFDT |
| imply SPL_POWER_SUPPORT |
| imply SPL_SEPARATE_BSS |
| imply SPL_SERIAL_SUPPORT |
| imply SPL_SYS_MALLOC_SIMPLE |
| imply SPL_WATCHDOG_SUPPORT |
| imply SPL_YMODEM_SUPPORT |
| help |
| This option specifies support for the AM335x |
| GP and HS EVM development platforms. The AM335x |
| GP EVM is a standalone test, development, and |
| evaluation module system that enables developers |
| to write software and develop hardware around |
| an AM335x processor subsystem. |
| |
| config TARGET_AM335X_BALTOS |
| bool "Support am335x_baltos" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_AM335X_IGEP003X |
| bool "Support am335x_igep003x" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_AM335X_SHC |
| bool "Support am335x based shc board from bosch" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| imply CMD_SPL |
| |
| config TARGET_AM335X_SL50 |
| bool "Support am335x_sl50" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_BAV335X |
| bool "Support bav335x" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| imply CMD_DM |
| help |
| The BAV335x OEM Network Processor integrates all the functions of an |
| embedded network computer in a small, easy to use SODIMM module which |
| incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8 |
| processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit |
| ethernet with simple connection to external connectors. |
| |
| For more information, visit: http://birdland.com/oem |
| |
| config TARGET_BRXRE1 |
| bool "Support BRXRE1" |
| select BOARD_LATE_INIT |
| |
| config TARGET_BRPPT1 |
| bool "Support BRPPT1" |
| select BOARD_LATE_INIT |
| |
| config TARGET_CHILIBOARD |
| bool "Grinn chiliBoard" |
| select AM33XX_CHILISOM |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_CM_T335 |
| bool "Support cm_t335" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_DRACO |
| bool "Support draco" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_ETAMIN |
| bool "Support etamin" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_PCM051 |
| bool "Support pcm051" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_PENGWYN |
| bool "Support pengwyn" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_PEPPER |
| bool "Support pepper" |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_PXM2 |
| bool "Support pxm2" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_RASTABAN |
| bool "Support rastaban" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_RUT |
| bool "Support rut" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_THUBAN |
| bool "Support thuban" |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_SERIAL |
| imply CMD_DM |
| |
| config TARGET_PDU001 |
| bool "Support PDU001" |
| select DM |
| select DM_SERIAL |
| imply SPL_SEPARATE_BSS |
| imply CMD_DM |
| help |
| Support for PDU001 platform developed by EETS GmbH. |
| The PDU001 is a processor and display unit developed around |
| the Computing-Module m2 from bytes at work AG. |
| |
| endchoice |
| |
| endif |
| |
| if AM43XX |
| |
| choice |
| prompt "AM43xx board select" |
| |
| config TARGET_AM43XX_EVM |
| bool "Support am43xx_evm" |
| select BOARD_LATE_INIT |
| select TI_I2C_BOARD_DETECT |
| imply DM_ETH |
| imply DM_I2C |
| imply DM_SPI |
| imply DM_SPI_FLASH |
| imply SPL_ENV_SUPPORT |
| imply SPL_FS_EXT4 |
| imply SPL_FS_FAT |
| imply SPL_GPIO_SUPPORT |
| imply SPL_I2C_SUPPORT |
| imply SPL_LIBCOMMON_SUPPORT |
| imply SPL_LIBDISK_SUPPORT |
| imply SPL_LIBGENERIC_SUPPORT |
| imply SPL_MMC_SUPPORT |
| imply SPL_NAND_SUPPORT |
| imply SPL_POWER_SUPPORT |
| imply SPL_SERIAL_SUPPORT |
| imply SPL_WATCHDOG_SUPPORT |
| imply SPL_YMODEM_SUPPORT |
| help |
| This option specifies support for the AM43xx |
| GP and HS EVM development platforms.The AM437x |
| GP EVM is a standalone test, development, and |
| evaluation module system that enables developers |
| to write software and develop hardware around |
| an AM43xx processor subsystem. |
| |
| config TARGET_CM_T43 |
| bool "Support cm_t43" |
| |
| endchoice |
| |
| config SPL_RTC_DDR_SUPPORT |
| bool |
| depends on SPL |
| prompt "Enable RTC-DDR ONLY Support" |
| help |
| If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in |
| self-refresh mode is a special power saving mode where in all |
| the other voltages are turned off apart from the RTC domain and DDR. |
| So only RTC is alive and ticking and one can program it to wake |
| up after a predetermined period. Once RTC alarm fires, the PMIC |
| powers up all the voltage domains. U-Boot takes a special path |
| as the DDR has contents is in self-refresh and restore path is |
| followed. |
| |
| endif |
| |
| if AM43XX || AM33XX |
| config PUB_ROM_DATA_SIZE |
| hex "Size in bytes of the L3 SRAM reserved by ROM to store data" |
| default 0x8400 |
| help |
| During the device boot, the public ROM uses the top of |
| the public L3 OCMC RAM to store r/w data like stack, |
| heap, globals etc. When the ROM is copying the boot |
| image from the boot media into memory, the image must |
| not spill over into this area. This value can be used |
| during compile time to determine the maximum size of a |
| boot image. Once the ROM transfers control to the boot |
| image, this area is no longer used, and can be reclaimed |
| for run time use by the boot image. |
| endif |
