| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * relocate - common relocation function for AArch64 U-Boot |
| * |
| * (C) Copyright 2013 |
| * Albert ARIBAUD <albert.u.boot@aribaud.net> |
| * David Feng <fenghua@phytium.com.cn> |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <elf.h> |
| #include <linux/linkage.h> |
| #include <asm/macro.h> |
| |
| /* |
| * void relocate_code (addr_moni) |
| * |
| * This function relocates the monitor code. |
| * x0 holds the destination address. |
| */ |
| ENTRY(relocate_code) |
| stp x29, x30, [sp, #-32]! /* create a stack frame */ |
| mov x29, sp |
| str x0, [sp, #16] |
| /* |
| * Copy u-boot from flash to RAM |
| */ |
| adr x1, __image_copy_start /* x1 <- Run &__image_copy_start */ |
| subs x9, x0, x1 /* x8 <- Run to copy offset */ |
| b.eq relocate_done /* skip relocation */ |
| /* |
| * Don't ldr x1, __image_copy_start here, since if the code is already |
| * running at an address other than it was linked to, that instruction |
| * will load the relocated value of __image_copy_start. To |
| * correctly apply relocations, we need to know the linked value. |
| * |
| * Linked &__image_copy_start, which we know was at |
| * CONFIG_SYS_TEXT_BASE, which is stored in _TEXT_BASE, as a non- |
| * relocated value, since it isn't a symbol reference. |
| */ |
| ldr x1, _TEXT_BASE /* x1 <- Linked &__image_copy_start */ |
| subs x9, x0, x1 /* x9 <- Link to copy offset */ |
| |
| adr x1, __image_copy_start /* x1 <- Run &__image_copy_start */ |
| adr x2, __image_copy_end /* x2 <- Run &__image_copy_end */ |
| copy_loop: |
| ldp x10, x11, [x1], #16 /* copy from source address [x1] */ |
| stp x10, x11, [x0], #16 /* copy to target address [x0] */ |
| cmp x1, x2 /* until source end address [x2] */ |
| b.lo copy_loop |
| str x0, [sp, #24] |
| |
| /* |
| * Fix .rela.dyn relocations |
| */ |
| adr x2, __rel_dyn_start /* x2 <- Run &__rel_dyn_start */ |
| adr x3, __rel_dyn_end /* x3 <- Run &__rel_dyn_end */ |
| fixloop: |
| ldp x0, x1, [x2], #16 /* (x0,x1) <- (SRC location, fixup) */ |
| ldr x4, [x2], #8 /* x4 <- addend */ |
| and x1, x1, #0xffffffff |
| cmp x1, #R_AARCH64_RELATIVE |
| bne fixnext |
| |
| /* relative fix: store addend plus offset at dest location */ |
| add x0, x0, x9 |
| add x4, x4, x9 |
| str x4, [x0] |
| fixnext: |
| cmp x2, x3 |
| b.lo fixloop |
| |
| relocate_done: |
| switch_el x1, 3f, 2f, 1f |
| bl hang |
| 3: mrs x0, sctlr_el3 |
| b 0f |
| 2: mrs x0, sctlr_el2 |
| b 0f |
| 1: mrs x0, sctlr_el1 |
| 0: tbz w0, #2, 5f /* skip flushing cache if disabled */ |
| tbz w0, #12, 4f /* skip invalidating i-cache if disabled */ |
| ic iallu /* i-cache invalidate all */ |
| isb sy |
| 4: ldp x0, x1, [sp, #16] |
| bl __asm_flush_dcache_range |
| bl __asm_flush_l3_dcache |
| 5: ldp x29, x30, [sp],#32 |
| ret |
| ENDPROC(relocate_code) |
