| /* |
| * Copyright 2018 Armadeus Systems <support@armadeus.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "imx6ul.dtsi" |
| |
| / { |
| memory { |
| reg = <0x80000000 0>; /* will be filled by U-Boot */ |
| }; |
| |
| reg_3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| usdhc3_pwrseq: usdhc3-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| phy-mode = "rmii"; |
| phy-reset-duration = <1>; |
| phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; |
| phy-handle = <ðphy1>; |
| phy-supply = <®_3v3>; |
| status = "okay"; |
| |
| mdio: mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| /* Bluetooth */ |
| &uart8 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart8>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* eMMC */ |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| bus-width = <8>; |
| no-1-8-v; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| /* WiFi */ |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| no-1-8-v; |
| non-removable; |
| mmc-pwrseq = <&usdhc3_pwrseq>; |
| status = "okay"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcmf: bcrmf@1 { |
| compatible = "brcm,bcm4329-fmac"; |
| reg = <1>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "host-wake"; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 |
| MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 |
| MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 |
| MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 |
| MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 |
| MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 |
| MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 |
| /* INT# */ |
| MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 |
| /* RST# */ |
| MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 |
| MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 |
| >; |
| }; |
| |
| pinctrl_uart8: uart8grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 |
| /* BT_REG_ON */ |
| MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 |
| MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 |
| MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 |
| MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 |
| MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 |
| MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 |
| MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 |
| MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 |
| MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 |
| MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 |
| /* WL_REG_ON */ |
| MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 |
| /* WL_IRQ */ |
| MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 |
| >; |
| }; |
| }; |
