arch/arm/dts/imx6sx-sdb.dts

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include "imx6sx-sdb.dtsi"

/ {
	model = "Freescale i.MX6 SoloX SDB RevB Board";

	regulators {
		/* Transceiver EN/STBY is active low on RevB board */
		reg_can_stby: regulator@10 {
			gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
		};
	};
};

&cpu0 {
	operating-points = <
		/* kHz    uV */
		996000  1250000
		792000  1175000
		396000  1175000
	>;
	fsl,soc-operating-points = <
		/* ARM kHz      SOC uV */
		996000  1250000
		792000  1175000
		396000  1175000
	>;

	fsl,arm-soc-shared = <1>;
};

&reg_arm {
	vin-supply = <&sw1a_reg>;
	regulator-allow-bypass;
};

&reg_soc {
	vin-supply = <&sw1a_reg>;
	regulator-allow-bypass;
};

&qspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi2>;
	status = "okay";

#ifndef SPANSIONFLASH
	ddrsmp=<0>;

	flash0: n25q256a@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q256a", "jedec,spi-nor";
		spi-max-frequency = <29000000>;
		reg = <0>;
	};

	flash1: n25q256a@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q256a", "jedec,spi-nor";
		spi-max-frequency = <29000000>;
		reg = <1>;
	};
#endif
};

&usbphy1 {
	fsl,tx-d-cal = <106>;
};

&usbphy2 {
	fsl,tx-d-cal = <106>;
};