| config ARCH_LS1012A |
| bool |
| select ARMV8_SET_SMPEN |
| select ARM_ERRATA_855873 if !TFABOOT |
| select FSL_LAYERSCAPE |
| select FSL_LSCH2 |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_FSL_DDR_BE |
| select SYS_FSL_MMDC |
| select SYS_FSL_ERRATUM_A010315 |
| select SYS_FSL_ERRATUM_A009798 |
| select SYS_FSL_ERRATUM_A008997 |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_ERRATUM_A009008 |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| imply PANIC_HANG |
| |
| config ARCH_LS1043A |
| bool |
| select ARMV8_SET_SMPEN |
| select ARM_ERRATA_855873 if !TFABOOT |
| select FSL_LAYERSCAPE |
| select FSL_LSCH2 |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_FSL_DDR |
| select SYS_FSL_DDR_BE |
| select SYS_FSL_DDR_VER_50 |
| select SYS_FSL_ERRATUM_A008850 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008997 |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_ERRATUM_A009008 |
| select SYS_FSL_ERRATUM_A009660 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009663 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009798 |
| select SYS_FSL_ERRATUM_A009929 |
| select SYS_FSL_ERRATUM_A009942 if !TFABOOT |
| select SYS_FSL_ERRATUM_A010315 |
| select SYS_FSL_ERRATUM_A010539 |
| select SYS_FSL_HAS_DDR3 |
| select SYS_FSL_HAS_DDR4 |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| select SYS_I2C_MXC_I2C3 |
| select SYS_I2C_MXC_I2C4 |
| imply CMD_PCI |
| |
| config ARCH_LS1046A |
| bool |
| select ARMV8_SET_SMPEN |
| select FSL_LAYERSCAPE |
| select FSL_LSCH2 |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_FSL_DDR |
| select SYS_FSL_DDR_BE |
| select SYS_FSL_DDR_VER_50 |
| select SYS_FSL_ERRATUM_A008336 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008511 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008850 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008997 |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_ERRATUM_A009008 |
| select SYS_FSL_ERRATUM_A009798 |
| select SYS_FSL_ERRATUM_A009801 |
| select SYS_FSL_ERRATUM_A009803 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009942 if !TFABOOT |
| select SYS_FSL_ERRATUM_A010165 if !TFABOOT |
| select SYS_FSL_ERRATUM_A010539 |
| select SYS_FSL_HAS_DDR4 |
| select SYS_FSL_SRDS_2 |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| select SYS_I2C_MXC_I2C3 |
| select SYS_I2C_MXC_I2C4 |
| imply SCSI |
| imply SCSI_AHCI |
| |
| config ARCH_LS1088A |
| bool |
| select ARMV8_SET_SMPEN |
| select ARM_ERRATA_855873 if !TFABOOT |
| select FSL_LAYERSCAPE |
| select FSL_LSCH3 |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_FSL_DDR |
| select SYS_FSL_DDR_LE |
| select SYS_FSL_DDR_VER_50 |
| select SYS_FSL_EC1 |
| select SYS_FSL_EC2 |
| select SYS_FSL_ERRATUM_A009803 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009942 if !TFABOOT |
| select SYS_FSL_ERRATUM_A010165 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008511 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008850 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_HAS_CCI400 |
| select SYS_FSL_HAS_DDR4 |
| select SYS_FSL_HAS_RGMII |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_LE |
| select SYS_FSL_SRDS_1 |
| select SYS_FSL_SRDS_2 |
| select FSL_TZASC_1 |
| select FSL_TZASC_400 |
| select FSL_TZPC_BP147 |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| select SYS_I2C_MXC_I2C3 |
| select SYS_I2C_MXC_I2C4 |
| imply SCSI |
| imply PANIC_HANG |
| |
| config ARCH_LS2080A |
| bool |
| select ARMV8_SET_SMPEN |
| select ARM_ERRATA_826974 |
| select ARM_ERRATA_828024 |
| select ARM_ERRATA_829520 |
| select ARM_ERRATA_833471 |
| select FSL_LAYERSCAPE |
| select FSL_LSCH3 |
| select SYS_FSL_SRDS_1 |
| select SYS_HAS_SERDES |
| select SYS_FSL_DDR |
| select SYS_FSL_DDR_LE |
| select SYS_FSL_DDR_VER_50 |
| select SYS_FSL_HAS_CCN504 |
| select SYS_FSL_HAS_DP_DDR |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_HAS_DDR4 |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_LE |
| select SYS_FSL_SRDS_2 |
| select FSL_TZASC_1 |
| select FSL_TZASC_2 |
| select FSL_TZASC_400 |
| select FSL_TZPC_BP147 |
| select SYS_FSL_ERRATUM_A008336 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008511 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008514 if !TFABOOT |
| select SYS_FSL_ERRATUM_A008585 |
| select SYS_FSL_ERRATUM_A008997 |
| select SYS_FSL_ERRATUM_A009007 |
| select SYS_FSL_ERRATUM_A009008 |
| select SYS_FSL_ERRATUM_A009635 |
| select SYS_FSL_ERRATUM_A009663 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009798 |
| select SYS_FSL_ERRATUM_A009801 |
| select SYS_FSL_ERRATUM_A009803 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009942 if !TFABOOT |
| select SYS_FSL_ERRATUM_A010165 if !TFABOOT |
| select SYS_FSL_ERRATUM_A009203 |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| select SYS_I2C_MXC_I2C3 |
| select SYS_I2C_MXC_I2C4 |
| imply DISTRO_DEFAULTS |
| imply PANIC_HANG |
| |
| config ARCH_LX2160A |
| bool |
| select ARMV8_SET_SMPEN |
| select FSL_LSCH3 |
| select NXP_LSCH3_2 |
| select SYS_HAS_SERDES |
| select SYS_FSL_SRDS_1 |
| select SYS_FSL_SRDS_2 |
| select SYS_NXP_SRDS_3 |
| select SYS_FSL_DDR |
| select SYS_FSL_DDR_LE |
| select SYS_FSL_DDR_VER_50 |
| select SYS_FSL_EC1 |
| select SYS_FSL_EC2 |
| select SYS_FSL_HAS_RGMII |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_HAS_CCN508 |
| select SYS_FSL_HAS_DDR4 |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_LE |
| select ARCH_EARLY_INIT_R |
| select BOARD_EARLY_INIT_F |
| select SYS_I2C_MXC |
| select SYS_I2C_MXC_I2C1 |
| select SYS_I2C_MXC_I2C2 |
| select SYS_I2C_MXC_I2C3 |
| select SYS_I2C_MXC_I2C4 |
| select SYS_I2C_MXC_I2C5 |
| select SYS_I2C_MXC_I2C6 |
| select SYS_I2C_MXC_I2C7 |
| select SYS_I2C_MXC_I2C8 |
| imply DISTRO_DEFAULTS |
| imply PANIC_HANG |
| imply SCSI |
| imply SCSI_AHCI |
| |
| config FSL_LSCH2 |
| bool |
| select SYS_FSL_HAS_CCI400 |
| select SYS_FSL_HAS_SEC |
| select SYS_FSL_SEC_COMPAT_5 |
| select SYS_FSL_SEC_BE |
| |
| config FSL_LSCH3 |
| bool |
| |
| config NXP_LSCH3_2 |
| bool |
| |
| config FSL_MC_ENET |
| bool "Management Complex network" |
| depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A |
| default y |
| select RESV_RAM |
| help |
| Enable Management Complex (MC) network |
| |
| menu "Layerscape architecture" |
| depends on FSL_LSCH2 || FSL_LSCH3 |
| |
| config FSL_LAYERSCAPE |
| bool |
| |
| config FSL_PCIE_COMPAT |
| string "PCIe compatible of Kernel DT" |
| depends on PCIE_LAYERSCAPE |
| default "fsl,ls1012a-pcie" if ARCH_LS1012A |
| default "fsl,ls1043a-pcie" if ARCH_LS1043A |
| default "fsl,ls1046a-pcie" if ARCH_LS1046A |
| default "fsl,ls2080a-pcie" if ARCH_LS2080A |
| default "fsl,ls1088a-pcie" if ARCH_LS1088A |
| default "fsl,lx2160a-pcie" if ARCH_LX2160A |
| help |
| This compatible is used to find pci controller node in Kernel DT |
| to complete fixup. |
| |
| config HAS_FEATURE_GIC64K_ALIGN |
| bool |
| default y if ARCH_LS1043A |
| |
| config HAS_FEATURE_ENHANCED_MSI |
| bool |
| default y if ARCH_LS1043A |
| |
| menu "Layerscape PPA" |
| config FSL_LS_PPA |
| bool "FSL Layerscape PPA firmware support" |
| depends on !ARMV8_PSCI |
| select ARMV8_SEC_FIRMWARE_SUPPORT |
| select SEC_FIRMWARE_ARMV8_PSCI |
| select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 |
| help |
| The FSL Primary Protected Application (PPA) is a software component |
| which is loaded during boot stage, and then remains resident in RAM |
| and runs in the TrustZone after boot. |
| Say y to enable it. |
| |
| config SPL_FSL_LS_PPA |
| bool "FSL Layerscape PPA firmware support for SPL build" |
| depends on !ARMV8_PSCI |
| select SPL_ARMV8_SEC_FIRMWARE_SUPPORT |
| select SEC_FIRMWARE_ARMV8_PSCI |
| select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 |
| help |
| The FSL Primary Protected Application (PPA) is a software component |
| which is loaded during boot stage, and then remains resident in RAM |
| and runs in the TrustZone after boot. This is to load PPA during SPL |
| stage instead of the RAM version of U-Boot. Once PPA is initialized, |
| the rest of U-Boot (including RAM version) runs at EL2. |
| choice |
| prompt "FSL Layerscape PPA firmware loading-media select" |
| depends on FSL_LS_PPA |
| default SYS_LS_PPA_FW_IN_MMC if SD_BOOT |
| default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT |
| default SYS_LS_PPA_FW_IN_XIP |
| |
| config SYS_LS_PPA_FW_IN_XIP |
| bool "XIP" |
| help |
| Say Y here if the PPA firmware locate at XIP flash, such |
| as NOR or QSPI flash. |
| |
| config SYS_LS_PPA_FW_IN_MMC |
| bool "eMMC or SD Card" |
| help |
| Say Y here if the PPA firmware locate at eMMC/SD card. |
| |
| config SYS_LS_PPA_FW_IN_NAND |
| bool "NAND" |
| help |
| Say Y here if the PPA firmware locate at NAND flash. |
| |
| endchoice |
| |
| config LS_PPA_ESBC_HDR_SIZE |
| hex "Length of PPA ESBC header" |
| depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP |
| default 0x2000 |
| help |
| Length (in bytes) of PPA ESBC header to be copied from MMC/SD or |
| NAND to memory to validate PPA image. |
| |
| endmenu |
| |
| config SYS_FSL_ERRATUM_A008997 |
| bool "Workaround for USB PHY erratum A008997" |
| |
| config SYS_FSL_ERRATUM_A009007 |
| bool |
| help |
| Workaround for USB PHY erratum A009007 |
| |
| config SYS_FSL_ERRATUM_A009008 |
| bool "Workaround for USB PHY erratum A009008" |
| |
| config SYS_FSL_ERRATUM_A009798 |
| bool "Workaround for USB PHY erratum A009798" |
| |
| config SYS_FSL_ERRATUM_A010315 |
| bool "Workaround for PCIe erratum A010315" |
| |
| config SYS_FSL_ERRATUM_A010539 |
| bool "Workaround for PIN MUX erratum A010539" |
| |
| config MAX_CPUS |
| int "Maximum number of CPUs permitted for Layerscape" |
| default 4 if ARCH_LS1043A |
| default 4 if ARCH_LS1046A |
| default 16 if ARCH_LS2080A |
| default 8 if ARCH_LS1088A |
| default 16 if ARCH_LX2160A |
| default 1 |
| help |
| Set this number to the maximum number of possible CPUs in the SoC. |
| SoCs may have multiple clusters with each cluster may have multiple |
| ports. If some ports are reserved but higher ports are used for |
| cores, count the reserved ports. This will allocate enough memory |
| in spin table to properly handle all cores. |
| |
| config EMC2305 |
| bool "Fan controller" |
| help |
| Enable the EMC2305 fan controller for configuration of fan |
| speed. |
| |
| config SECURE_BOOT |
| bool "Secure Boot" |
| help |
| Enable Freescale Secure Boot feature |
| |
| config QSPI_AHB_INIT |
| bool "Init the QSPI AHB bus" |
| help |
| The default setting for QSPI AHB bus just support 3bytes addressing. |
| But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB |
| bus for those flashes to support the full QSPI flash size. |
| |
| config SYS_CCI400_OFFSET |
| hex "Offset for CCI400 base" |
| depends on SYS_FSL_HAS_CCI400 |
| default 0x3090000 if ARCH_LS1088A |
| default 0x180000 if FSL_LSCH2 |
| help |
| Offset for CCI400 base |
| CCI400 base addr = CCSRBAR + CCI400_OFFSET |
| |
| config SYS_FSL_IFC_BANK_COUNT |
| int "Maximum banks of Integrated flash controller" |
| depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A |
| default 4 if ARCH_LS1043A |
| default 4 if ARCH_LS1046A |
| default 8 if ARCH_LS2080A || ARCH_LS1088A |
| |
| config SYS_FSL_HAS_CCI400 |
| bool |
| |
| config SYS_FSL_HAS_CCN504 |
| bool |
| |
| config SYS_FSL_HAS_CCN508 |
| bool |
| |
| config SYS_FSL_HAS_DP_DDR |
| bool |
| |
| config SYS_FSL_SRDS_1 |
| bool |
| |
| config SYS_FSL_SRDS_2 |
| bool |
| |
| config SYS_NXP_SRDS_3 |
| bool |
| |
| config SYS_HAS_SERDES |
| bool |
| |
| config FSL_TZASC_1 |
| bool |
| |
| config FSL_TZASC_2 |
| bool |
| |
| config FSL_TZASC_400 |
| bool |
| |
| config FSL_TZPC_BP147 |
| bool |
| endmenu |
| |
| menu "Layerscape clock tree configuration" |
| depends on FSL_LSCH2 || FSL_LSCH3 |
| |
| config SYS_FSL_CLK |
| bool "Enable clock tree initialization" |
| default y |
| |
| config CLUSTER_CLK_FREQ |
| int "Reference clock of core cluster" |
| depends on ARCH_LS1012A |
| default 100000000 |
| help |
| This number is the reference clock frequency of core PLL. |
| For most platforms, the core PLL and Platform PLL have the same |
| reference clock, but for some platforms, LS1012A for instance, |
| they are provided sepatately. |
| |
| config SYS_FSL_PCLK_DIV |
| int "Platform clock divider" |
| default 1 if ARCH_LS1043A |
| default 1 if ARCH_LS1046A |
| default 1 if ARCH_LS1088A |
| default 2 |
| help |
| This is the divider that is used to derive Platform clock from |
| Platform PLL, in another word: |
| Platform_clk = Platform_PLL_freq / this_divider |
| |
| config SYS_FSL_DSPI_CLK_DIV |
| int "DSPI clock divider" |
| default 1 if ARCH_LS1043A |
| default 2 |
| help |
| This is the divider that is used to derive DSPI clock from Platform |
| clock, in another word DSPI_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_DUART_CLK_DIV |
| int "DUART clock divider" |
| default 1 if ARCH_LS1043A |
| default 4 if ARCH_LX2160A |
| default 2 |
| help |
| This is the divider that is used to derive DUART clock from Platform |
| clock, in another word DUART_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_I2C_CLK_DIV |
| int "I2C clock divider" |
| default 1 if ARCH_LS1043A |
| default 2 |
| help |
| This is the divider that is used to derive I2C clock from Platform |
| clock, in another word I2C_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_IFC_CLK_DIV |
| int "IFC clock divider" |
| default 1 if ARCH_LS1043A |
| default 2 |
| help |
| This is the divider that is used to derive IFC clock from Platform |
| clock, in another word IFC_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_LPUART_CLK_DIV |
| int "LPUART clock divider" |
| default 1 if ARCH_LS1043A |
| default 2 |
| help |
| This is the divider that is used to derive LPUART clock from Platform |
| clock, in another word LPUART_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_SDHC_CLK_DIV |
| int "SDHC clock divider" |
| default 1 if ARCH_LS1043A |
| default 1 if ARCH_LS1012A |
| default 2 |
| help |
| This is the divider that is used to derive SDHC clock from Platform |
| clock, in another word SDHC_clk = Platform_clk / this_divider. |
| |
| config SYS_FSL_QMAN_CLK_DIV |
| int "QMAN clock divider" |
| default 1 if ARCH_LS1043A |
| default 2 |
| help |
| This is the divider that is used to derive QMAN clock from Platform |
| clock, in another word QMAN_clk = Platform_clk / this_divider. |
| endmenu |
| |
| config RESV_RAM |
| bool |
| help |
| Reserve memory from the top, tracked by gd->arch.resv_ram. This |
| reserved RAM can be used by special driver that resides in memory |
| after U-Boot exits. It's up to implementation to allocate and allow |
| access to this reserved memory. For example, the reserved RAM can |
| be at the high end of physical memory. The reserve RAM may be |
| excluded from memory bank(s) passed to OS, or marked as reserved. |
| |
| config SYS_FSL_EC1 |
| bool |
| help |
| Ethernet controller 1, this is connected to |
| MAC17 for LX2160A or to MAC3 for other SoCs |
| Provides DPAA2 capabilities |
| |
| config SYS_FSL_EC2 |
| bool |
| help |
| Ethernet controller 2, this is connected to |
| MAC18 for LX2160A or to MAC4 for other SoCs |
| Provides DPAA2 capabilities |
| |
| config SYS_FSL_ERRATUM_A008336 |
| bool |
| |
| config SYS_FSL_ERRATUM_A008514 |
| bool |
| |
| config SYS_FSL_ERRATUM_A008585 |
| bool |
| |
| config SYS_FSL_ERRATUM_A008850 |
| bool |
| |
| config SYS_FSL_ERRATUM_A009203 |
| bool |
| |
| config SYS_FSL_ERRATUM_A009635 |
| bool |
| |
| config SYS_FSL_ERRATUM_A009660 |
| bool |
| |
| config SYS_FSL_ERRATUM_A009929 |
| bool |
| |
| |
| config SYS_FSL_HAS_RGMII |
| bool |
| depends on SYS_FSL_EC1 || SYS_FSL_EC2 |
| |
| |
| config SYS_MC_RSV_MEM_ALIGN |
| hex "Management Complex reserved memory alignment" |
| depends on RESV_RAM |
| default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A |
| help |
| Reserved memory needs to be aligned for MC to use. Default value |
| is 512MB. |
| |
| config SPL_LDSCRIPT |
| default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A |
| |
| config HAS_FSL_XHCI_USB |
| bool |
| default y if ARCH_LS1043A || ARCH_LS1046A |
| help |
| For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use |
| pins, select it when the pins are assigned to USB. |
| |
| config TFABOOT |
| bool "Support for booting from TFA" |
| default n |
| help |
| Enabling this will make a U-Boot binary that is capable of being |
| booted via TFA. |
