blob: ecf9fbd2ca7016a0365a0c1a0ebfd8386e65d65c [file] [log] [blame] [edit]
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "Toshiba AC100 / Dynabook AZ";
compatible = "compal,paz00", "nvidia,tegra20";
chosen {
stdout-path = &uarta;
};
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartc;
usb0 = "/usb@c5000000";
usb1 = "/usb@c5004000";
usb2 = "/usb@c5008000";
mmc0 = "/sdhci@c8000600";
mmc1 = "/sdhci@c8000000";
};
memory {
reg = <0x00000000 0x20000000>;
};
host1x@50000000 {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&panel>;
display-timings {
timing@0 {
/* PAZ00 has 1024x600 */
clock-frequency = <54030000>;
hactive = <1024>;
vactive = <600>;
hback-porch = <160>;
hfront-porch = <24>;
hsync-len = <136>;
vback-porch = <3>;
vfront-porch = <61>;
vsync-len = <6>;
hsync-active = <1>;
};
};
};
};
hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
GPIO_ACTIVE_HIGH>;
};
};
pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata", "atc", "atd", "ate",
"dap2", "gmb", "gmc", "gmd", "spia",
"spib", "spic", "spid", "spie";
nvidia,function = "gmi";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "pllc_out1";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gpu {
nvidia,pins = "gpu", "sdb", "sdd";
nvidia,function = "pwm";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uarta";
};
kbca {
nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
nvidia,function = "kbc";
};
kbcb {
nvidia,pins = "kbcb", "kbcd";
nvidia,function = "sdio2";
};
lcsn {
nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhp0", "lhp1", "lhp2",
"lhs", "lm0", "lm1", "lpp", "lpw0",
"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
"lsda", "lsdi", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc";
nvidia,function = "owr";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdc {
nvidia,pins = "sdc";
nvidia,function = "twc";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "spi4";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "rsvd2";
};
spif {
nvidia,pins = "spif", "uac";
nvidia,function = "rsvd4";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "spdif";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dap2", "dtf",
"gma", "gmb", "gmc", "gmd", "gme",
"gpu", "gpu7", "gpv", "i2cp", "pta",
"rm", "sdio1", "slxk", "spdo", "uac",
"uda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp", "dap3", "dap4", "dtb",
"dtc", "dte", "slxa", "slxc", "slxd",
"spdi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib", "spid",
"spif";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "irrx", "irtx", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"spic", "spig", "uaa", "uab";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
"spie", "spih", "uad", "uca", "ucb";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhs", "lsc0", "lspi",
"lvs", "pmc";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_lcsn {
nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
"lm0", "lm1", "lpp", "lpw0", "lpw1",
"lpw2", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "lvp1", "sdb";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
};
};
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
};
serial@70006200 {
status = "okay";
};
pwm: pwm@7000a000 {
status = "okay";
};
lvds_ddc: i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
alc5632: alc5632@1e {
compatible = "realtek,alc5632";
reg = <0x1e>;
gpio-controller;
#gpio-cells = <2>;
};
};
hdmi_ddc: i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
nvec@7000c500 {
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <80000>;
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
slave-addr = <138>;
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
sys-supply = <&p5valw_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
vinldo23-supply = <&sm2_reg>;
vinldo4-supply = <&sm2_reg>;
vinldo678-supply = <&sm2_reg>;
vinldo9-supply = <&sm2_reg>;
regulators {
sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
sm0 {
regulator-name = "+1.2vs_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
sm1 {
regulator-name = "+1.0vs_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
sm2_reg: sm2 {
regulator-name = "+3.7vs_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
/* LDO0 is not connected to anything */
ldo1 {
regulator-name = "+1.1vs_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ldo2 {
regulator-name = "+1.2vs_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo3 {
regulator-name = "+3.3vs_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo4 {
regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo5 {
regulator-name = "+2.85vs_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
ldo6 {
/*
* Research indicates this should be
* 1.8v; other boards that use this
* rail for the same purpose need it
* set to 1.8v. The schematic signal
* name is incorrect; perhaps copied
* from an incorrect NVIDIA reference.
*/
regulator-name = "+2.85vs_ldo6,avdd_vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
hdmi_vdd_reg: ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
hdmi_pll_reg: ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo9 {
regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
ldo_rtc {
regulator-name = "+3.3vs_rtc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <0>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <0>;
nvidia,sys-clock-req-active-high;
};
usb@c5000000 {
status = "okay";
};
usb-phy@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_bl_reg>;
pwms = <&pwm 0 5000000>;
brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
default-brightness-level = <10>;
backlight-boot-off;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "wifi-led";
gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
linux,default-trigger = "rfkill0";
};
};
panel: panel {
compatible = "samsung,ltn101nt05", "simple-panel";
ddc-i2c-bus = <&lvds_ddc>;
power-supply = <&vdd_pnl_reg>;
enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
p5valw_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "+5valw";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vdd_pnl_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "+3VS,vdd_pnl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vdd_bl_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
sound {
compatible = "nvidia,tegra-audio-alc5632-paz00",
"nvidia,tegra-audio-alc5632";
nvidia,model = "Compal PAZ00";
nvidia,audio-routing =
"Int Spk", "SPKOUT",
"Int Spk", "SPKOUTN",
"Headset Mic", "MICBIAS1",
"MIC1", "Headset Mic",
"Headset Stereophone", "HPR",
"Headset Stereophone", "HPL",
"DMICDAT", "Digital Mic";
nvidia,audio-codec = <&alc5632>;
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};