blob: afa7832f8936349817c8f36e812730a4cee828bd [file] [log] [blame] [edit]
/*
* Copyright 2016 - Michael Kurz <michi.kurz@gmail.com>
* Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com>
*
* Based on:
* stm32f429.dtsi from Linux
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f7-rcc.h>
/ {
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
};
soc {
u-boot,dm-pre-reloc;
mac: ethernet@40028000 {
compatible = "st,stm32-dwmac";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
interrupts = <61>, <62>;
interrupt-names = "macirq", "eth_wake_irq";
snps,pbl = <8>;
snps,mixed-burst;
dma-ranges;
status = "disabled";
};
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
u-boot,dm-pre-reloc;
};
qspi: quadspi@A0001000 {
compatible = "st,stm32-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <92>;
spi-max-frequency = <108000000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
status = "disabled";
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
status = "disabled";
u-boot,dm-pre-reloc;
};
pwrcfg: power-config@58024800 {
compatible = "syscon";
reg = <0x40007000 0x400>;
};
rcc: rcc@40023810 {
#reset-cells = <1>;
#clock-cells = <2>;
compatible = "st,stm32f746-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
clocks = <&clk_hse>;
st,syscfg = <&pwrcfg>;
u-boot,dm-pre-reloc;
};
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32f746-pinctrl";
ranges = <0 0x40020000 0x3000>;
u-boot,dm-pre-reloc;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
u-boot,dm-pre-reloc;
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
u-boot,dm-pre-reloc;
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
u-boot,dm-pre-reloc;
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
u-boot,dm-pre-reloc;
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
u-boot,dm-pre-reloc;
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
u-boot,dm-pre-reloc;
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
u-boot,dm-pre-reloc;
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
u-boot,dm-pre-reloc;
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
u-boot,dm-pre-reloc;
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
u-boot,dm-pre-reloc;
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
compatible = "st,stm32-gpio";
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
u-boot,dm-pre-reloc;
};
sdio_pins: sdio_pins@0 {
pins {
pinmux = <STM32F746_PC8_FUNC_SDMMC1_D0>,
<STM32F746_PC9_FUNC_SDMMC1_D1>,
<STM32F746_PC10_FUNC_SDMMC1_D2>,
<STM32F746_PC11_FUNC_SDMMC1_D3>,
<STM32F746_PC12_FUNC_SDMMC1_CK>,
<STM32F746_PD2_FUNC_SDMMC1_CMD>;
drive-push-pull;
slew-rate = <2>;
};
};
sdio_pins_od: sdio_pins_od@0 {
pins1 {
pinmux = <STM32F746_PC8_FUNC_SDMMC1_D0>,
<STM32F746_PC9_FUNC_SDMMC1_D1>,
<STM32F746_PC10_FUNC_SDMMC1_D2>,
<STM32F746_PC11_FUNC_SDMMC1_D3>,
<STM32F746_PC12_FUNC_SDMMC1_CK>;
drive-push-pull;
slew-rate = <2>;
};
pins2 {
pinmux = <STM32F746_PD2_FUNC_SDMMC1_CMD>;
drive-open-drain;
slew-rate = <2>;
};
};
sdio_pins_b: sdio_pins_b@0 {
pins {
pinmux = <STM32F769_PG9_FUNC_SDMMC2_D0>,
<STM32F769_PG10_FUNC_SDMMC2_D1>,
<STM32F769_PB3_FUNC_SDMMC2_D2>,
<STM32F769_PB4_FUNC_SDMMC2_D3>,
<STM32F769_PD6_FUNC_SDMMC2_CLK>,
<STM32F769_PD7_FUNC_SDMMC2_CMD>;
drive-push-pull;
slew-rate = <2>;
};
};
sdio_pins_od_b: sdio_pins_od_b@0 {
pins1 {
pinmux = <STM32F769_PG9_FUNC_SDMMC2_D0>,
<STM32F769_PG10_FUNC_SDMMC2_D1>,
<STM32F769_PB3_FUNC_SDMMC2_D2>,
<STM32F769_PB4_FUNC_SDMMC2_D3>,
<STM32F769_PD6_FUNC_SDMMC2_CLK>;
drive-push-pull;
slew-rate = <2>;
};
pins2 {
pinmux = <STM32F769_PD7_FUNC_SDMMC2_CMD>;
drive-open-drain;
slew-rate = <2>;
};
};
};
sdio: sdio@40012c00 {
compatible = "st,stm32f4xx-sdio";
reg = <0x40012c00 0x400>;
clocks = <&rcc 0 171>;
interrupts = <49>;
status = "disabled";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_pins_od>;
pinctrl-names = "default", "opendrain";
max-frequency = <48000000>;
};
sdio2: sdio2@40011c00 {
compatible = "st,stm32f4xx-sdio";
reg = <0x40011c00 0x400>;
clocks = <&rcc 0 167>;
interrupts = <103>;
status = "disabled";
pinctrl-0 = <&sdio_pins_b>;
pinctrl-1 = <&sdio_pins_od_b>;
pinctrl-names = "default", "opendrain";
max-frequency = <48000000>;
};
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
u-boot,dm-pre-reloc;
status = "disabled";
};
};
};
&systick {
status = "okay";
};