blob: 6e94e58337dde7946c6b342590d64a253a899212 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017-2019 NXP
*/
/dts-v1/;
#include "fsl-imx8qxp.dtsi"
/ {
model = "Freescale i.MX8QXP LPDDR4 ARM2";
compatible = "fsl,imx8qxp-lpddr4-arm2", "fsl,imx8qxp";
aliases {
gpio8 = &pca9557_a;
gpio9 = &pca9557_b;
gpio10 = &pca9557_c;
};
chosen {
bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
stdout-path = &lpuart0;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_otg1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: usdhc2_vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <300>;
u-boot,off-on-delay-us = <5000>;
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1>;
imx8qxp-arm2 {
pinctrl_hog_1: hoggrp-1 {
fsl,pins = <
SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000048
SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0
SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060
SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060
SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060
SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060
SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060
SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060
SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060
SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060
SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060
SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060
SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060
SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060
>;
};
pinctrl_fec2: fec2grp {
fsl,pins = <
SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000060
SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x00000060
SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000060
SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000060
SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x00000060
SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x00000060
SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x00000060
SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000060
SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000060
SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000060
SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x00000060
SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x00000060
>;
};
pinctrl_lpi2c1: lpi1cgrp {
fsl,pins = <
SC_P_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021
SC_P_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021
>;
};
pinctrl_lpi2c3: lpi2cgrp {
fsl,pins = <
SC_P_SPI3_CS1_ADMA_I2C3_SCL 0x06000020
SC_P_MCLK_IN1_ADMA_I2C3_SDA 0x06000020
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
SC_P_UART0_RX_ADMA_UART0_RX 0x0600002c
SC_P_UART0_TX_ADMA_UART0_TX 0x0600002c
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000040
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000021
SC_P_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021
SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
>;
};
pinctrl_flexspi0: flexspi0grp {
fsl,pins = <
SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021
SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021
SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021
SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021
SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021
SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021
SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021
SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021
SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021
SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021
SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021
SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021
SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021
SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021
SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021
SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
>;
};
pinctrl_i2c0_mipi_lvds0: mipi_lvds0_i2c0_grp {
fsl,pins = <
SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020
SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020
>;
};
pinctrl_i2c0_mipi_lvds1: mipi_lvds1_i2c0_grp {
fsl,pins = <
SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020
SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020
>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&gpio4 {
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-txid";
phy-handle = <&ethphy0>;
fsl,magic-packet;
fsl,rgmii_rxc_dly;
status = "okay";
phy-reset-gpios = <&pca9557_a 1 GPIO_ACTIVE_LOW>;
phy-reset-duration = <10>;
phy-reset-post-delay = <150>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
at803x,eee-disabled;
at803x,vddio-1p8v;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
at803x,eee-disabled;
at803x,vddio-1p8v;
status = "disabled";
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec2>;
phy-mode = "rgmii-txid";
phy-handle = <&ethphy1>;
fsl,magic-packet;
fsl,rgmii_rxc_dly;
status = "disabled";
phy-reset-gpios = <&pca9557_a 4 GPIO_ACTIVE_LOW>;
phy-reset-duration = <10>;
phy-reset-post-delay = <150>;
};
&flexspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi0>;
status = "okay";
flash0: mt35xu512aba@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <29000000>;
spi-nor,ddr-quad-read-dummy = <8>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c1>;
status = "okay";
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c3>;
status = "okay";
pca9557_a: gpio@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
#gpio-cells = <2>;
};
pca9557_b: gpio@19 {
compatible = "nxp,pca9557";
reg = <0x19>;
gpio-controller;
#gpio-cells = <2>;
};
pca9557_c: gpio@1b {
compatible = "nxp,pca9557";
reg = <0x1b>;
gpio-controller;
#gpio-cells = <2>;
};
};
&i2c0_mipi_lvds0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_mipi_lvds0>;
clock-frequency = <100000>;
status = "okay";
it6263-0@4c {
compatible = "ITE,it6263";
reg = <0x4c>;
};
};
&i2c0_mipi_lvds1 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_mipi_lvds1>;
clock-frequency = <100000>;
status = "okay";
it6263-1@4c {
compatible = "ITE,it6263";
reg = <0x4c>;
};
};
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
bus-width = <4>;
cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
srp-disable;
hnp-disable;
adp-disable;
disable-over-current;
status = "okay";
};
&usbotg3 {
status = "okay";
};