| /* |
| * (C) Copyright 2015 Google, Inc |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/cru_rk3399.h> |
| #include <asm/arch/hardware.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/clock/rk3399-cru.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rk3399_pmuclk_priv { |
| struct rk3399_pmucru *pmucru; |
| }; |
| |
| struct pll_div { |
| u32 refdiv; |
| u32 fbdiv; |
| u32 postdiv1; |
| u32 postdiv2; |
| u32 frac; |
| }; |
| |
| #define RATE_TO_DIV(input_rate, output_rate) \ |
| ((input_rate) / (output_rate) - 1); |
| #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) |
| |
| #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ |
| .refdiv = _refdiv,\ |
| .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ |
| .postdiv1 = _postdiv1, .postdiv2 = _postdiv2}; |
| |
| static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); |
| static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); |
| static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); |
| |
| static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1); |
| static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1); |
| |
| static const struct pll_div *apll_l_cfgs[] = { |
| [APLL_L_1600_MHZ] = &apll_l_1600_cfg, |
| [APLL_L_600_MHZ] = &apll_l_600_cfg, |
| }; |
| |
| enum { |
| /* PLL_CON0 */ |
| PLL_FBDIV_MASK = 0xfff, |
| PLL_FBDIV_SHIFT = 0, |
| |
| /* PLL_CON1 */ |
| PLL_POSTDIV2_SHIFT = 12, |
| PLL_POSTDIV2_MASK = 0x7 << PLL_POSTDIV2_SHIFT, |
| PLL_POSTDIV1_SHIFT = 8, |
| PLL_POSTDIV1_MASK = 0x7 << PLL_POSTDIV1_SHIFT, |
| PLL_REFDIV_MASK = 0x3f, |
| PLL_REFDIV_SHIFT = 0, |
| |
| /* PLL_CON2 */ |
| PLL_LOCK_STATUS_SHIFT = 31, |
| PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT, |
| PLL_FRACDIV_MASK = 0xffffff, |
| PLL_FRACDIV_SHIFT = 0, |
| |
| /* PLL_CON3 */ |
| PLL_MODE_SHIFT = 8, |
| PLL_MODE_MASK = 3 << PLL_MODE_SHIFT, |
| PLL_MODE_SLOW = 0, |
| PLL_MODE_NORM, |
| PLL_MODE_DEEP, |
| PLL_DSMPD_SHIFT = 3, |
| PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT, |
| PLL_INTEGER_MODE = 1, |
| |
| /* PMUCRU_CLKSEL_CON0 */ |
| PMU_PCLK_DIV_CON_MASK = 0x1f, |
| PMU_PCLK_DIV_CON_SHIFT = 0, |
| |
| /* PMUCRU_CLKSEL_CON1 */ |
| SPI3_PLL_SEL_SHIFT = 7, |
| SPI3_PLL_SEL_MASK = 1 << SPI3_PLL_SEL_SHIFT, |
| SPI3_PLL_SEL_24M = 0, |
| SPI3_PLL_SEL_PPLL = 1, |
| SPI3_DIV_CON_SHIFT = 0x0, |
| SPI3_DIV_CON_MASK = 0x7f, |
| |
| /* PMUCRU_CLKSEL_CON2 */ |
| I2C_DIV_CON_MASK = 0x7f, |
| CLK_I2C8_DIV_CON_SHIFT = 8, |
| CLK_I2C0_DIV_CON_SHIFT = 0, |
| |
| /* PMUCRU_CLKSEL_CON3 */ |
| CLK_I2C4_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON0 */ |
| ACLKM_CORE_L_DIV_CON_SHIFT = 8, |
| ACLKM_CORE_L_DIV_CON_MASK = 0x1f << ACLKM_CORE_L_DIV_CON_SHIFT, |
| CLK_CORE_L_PLL_SEL_SHIFT = 6, |
| CLK_CORE_L_PLL_SEL_MASK = 3 << CLK_CORE_L_PLL_SEL_SHIFT, |
| CLK_CORE_L_PLL_SEL_ALPLL = 0x0, |
| CLK_CORE_L_PLL_SEL_ABPLL = 0x1, |
| CLK_CORE_L_PLL_SEL_DPLL = 0x10, |
| CLK_CORE_L_PLL_SEL_GPLL = 0x11, |
| CLK_CORE_L_DIV_MASK = 0x1f, |
| CLK_CORE_L_DIV_SHIFT = 0, |
| |
| /* CLKSEL_CON1 */ |
| PCLK_DBG_L_DIV_SHIFT = 0x8, |
| PCLK_DBG_L_DIV_MASK = 0x1f << PCLK_DBG_L_DIV_SHIFT, |
| ATCLK_CORE_L_DIV_SHIFT = 0, |
| ATCLK_CORE_L_DIV_MASK = 0x1f << ATCLK_CORE_L_DIV_SHIFT, |
| |
| /* CLKSEL_CON14 */ |
| PCLK_PERIHP_DIV_CON_SHIFT = 12, |
| PCLK_PERIHP_DIV_CON_MASK = 0x7 << PCLK_PERIHP_DIV_CON_SHIFT, |
| HCLK_PERIHP_DIV_CON_SHIFT = 8, |
| HCLK_PERIHP_DIV_CON_MASK = 3 << HCLK_PERIHP_DIV_CON_SHIFT, |
| ACLK_PERIHP_PLL_SEL_SHIFT = 7, |
| ACLK_PERIHP_PLL_SEL_MASK = 1 << ACLK_PERIHP_PLL_SEL_SHIFT, |
| ACLK_PERIHP_PLL_SEL_CPLL = 0, |
| ACLK_PERIHP_PLL_SEL_GPLL = 1, |
| ACLK_PERIHP_DIV_CON_SHIFT = 0, |
| ACLK_PERIHP_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON21 */ |
| ACLK_EMMC_PLL_SEL_SHIFT = 7, |
| ACLK_EMMC_PLL_SEL_MASK = 0x1 << ACLK_EMMC_PLL_SEL_SHIFT, |
| ACLK_EMMC_PLL_SEL_GPLL = 0x1, |
| ACLK_EMMC_DIV_CON_SHIFT = 0, |
| ACLK_EMMC_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON22 */ |
| CLK_EMMC_PLL_SHIFT = 8, |
| CLK_EMMC_PLL_MASK = 0x7 << CLK_EMMC_PLL_SHIFT, |
| CLK_EMMC_PLL_SEL_GPLL = 0x1, |
| CLK_EMMC_PLL_SEL_24M = 0x5, |
| CLK_EMMC_DIV_CON_SHIFT = 0, |
| CLK_EMMC_DIV_CON_MASK = 0x7f << CLK_EMMC_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON23 */ |
| PCLK_PERILP0_DIV_CON_SHIFT = 12, |
| PCLK_PERILP0_DIV_CON_MASK = 0x7 << PCLK_PERILP0_DIV_CON_SHIFT, |
| HCLK_PERILP0_DIV_CON_SHIFT = 8, |
| HCLK_PERILP0_DIV_CON_MASK = 3 << HCLK_PERILP0_DIV_CON_SHIFT, |
| ACLK_PERILP0_PLL_SEL_SHIFT = 7, |
| ACLK_PERILP0_PLL_SEL_MASK = 1 << ACLK_PERILP0_PLL_SEL_SHIFT, |
| ACLK_PERILP0_PLL_SEL_CPLL = 0, |
| ACLK_PERILP0_PLL_SEL_GPLL = 1, |
| ACLK_PERILP0_DIV_CON_SHIFT = 0, |
| ACLK_PERILP0_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON25 */ |
| PCLK_PERILP1_DIV_CON_SHIFT = 8, |
| PCLK_PERILP1_DIV_CON_MASK = 0x7 << PCLK_PERILP1_DIV_CON_SHIFT, |
| HCLK_PERILP1_PLL_SEL_SHIFT = 7, |
| HCLK_PERILP1_PLL_SEL_MASK = 1 << HCLK_PERILP1_PLL_SEL_SHIFT, |
| HCLK_PERILP1_PLL_SEL_CPLL = 0, |
| HCLK_PERILP1_PLL_SEL_GPLL = 1, |
| HCLK_PERILP1_DIV_CON_SHIFT = 0, |
| HCLK_PERILP1_DIV_CON_MASK = 0x1f, |
| |
| /* CLKSEL_CON26 */ |
| CLK_SARADC_DIV_CON_SHIFT = 8, |
| CLK_SARADC_DIV_CON_MASK = 0xff << CLK_SARADC_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON27 */ |
| CLK_TSADC_SEL_X24M = 0x0, |
| CLK_TSADC_SEL_SHIFT = 15, |
| CLK_TSADC_SEL_MASK = 1 << CLK_TSADC_SEL_SHIFT, |
| CLK_TSADC_DIV_CON_SHIFT = 0, |
| CLK_TSADC_DIV_CON_MASK = 0x3ff, |
| |
| /* CLKSEL_CON47 & CLKSEL_CON48 */ |
| ACLK_VOP_PLL_SEL_SHIFT = 6, |
| ACLK_VOP_PLL_SEL_MASK = 0x3 << ACLK_VOP_PLL_SEL_SHIFT, |
| ACLK_VOP_PLL_SEL_CPLL = 0x1, |
| ACLK_VOP_DIV_CON_SHIFT = 0, |
| ACLK_VOP_DIV_CON_MASK = 0x1f << ACLK_VOP_DIV_CON_SHIFT, |
| |
| /* CLKSEL_CON49 & CLKSEL_CON50 */ |
| DCLK_VOP_DCLK_SEL_SHIFT = 11, |
| DCLK_VOP_DCLK_SEL_MASK = 1 << DCLK_VOP_DCLK_SEL_SHIFT, |
| DCLK_VOP_DCLK_SEL_DIVOUT = 0, |
| DCLK_VOP_PLL_SEL_SHIFT = 8, |
| DCLK_VOP_PLL_SEL_MASK = 3 << DCLK_VOP_PLL_SEL_SHIFT, |
| DCLK_VOP_PLL_SEL_VPLL = 0, |
| DCLK_VOP_DIV_CON_MASK = 0xff, |
| DCLK_VOP_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON58 */ |
| CLK_SPI_PLL_SEL_MASK = 1, |
| CLK_SPI_PLL_SEL_CPLL = 0, |
| CLK_SPI_PLL_SEL_GPLL = 1, |
| CLK_SPI_PLL_DIV_CON_MASK = 0x7f, |
| CLK_SPI5_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI5_PLL_SEL_SHIFT = 15, |
| |
| /* CLKSEL_CON59 */ |
| CLK_SPI1_PLL_SEL_SHIFT = 15, |
| CLK_SPI1_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI0_PLL_SEL_SHIFT = 7, |
| CLK_SPI0_PLL_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON60 */ |
| CLK_SPI4_PLL_SEL_SHIFT = 15, |
| CLK_SPI4_PLL_DIV_CON_SHIFT = 8, |
| CLK_SPI2_PLL_SEL_SHIFT = 7, |
| CLK_SPI2_PLL_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON61 */ |
| CLK_I2C_PLL_SEL_MASK = 1, |
| CLK_I2C_PLL_SEL_CPLL = 0, |
| CLK_I2C_PLL_SEL_GPLL = 1, |
| CLK_I2C5_PLL_SEL_SHIFT = 15, |
| CLK_I2C5_DIV_CON_SHIFT = 8, |
| CLK_I2C1_PLL_SEL_SHIFT = 7, |
| CLK_I2C1_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON62 */ |
| CLK_I2C6_PLL_SEL_SHIFT = 15, |
| CLK_I2C6_DIV_CON_SHIFT = 8, |
| CLK_I2C2_PLL_SEL_SHIFT = 7, |
| CLK_I2C2_DIV_CON_SHIFT = 0, |
| |
| /* CLKSEL_CON63 */ |
| CLK_I2C7_PLL_SEL_SHIFT = 15, |
| CLK_I2C7_DIV_CON_SHIFT = 8, |
| CLK_I2C3_PLL_SEL_SHIFT = 7, |
| CLK_I2C3_DIV_CON_SHIFT = 0, |
| |
| /* CRU_SOFTRST_CON4 */ |
| RESETN_DDR0_REQ_SHIFT = 8, |
| RESETN_DDR0_REQ_MASK = 1 << RESETN_DDR0_REQ_SHIFT, |
| RESETN_DDRPHY0_REQ_SHIFT = 9, |
| RESETN_DDRPHY0_REQ_MASK = 1 << RESETN_DDRPHY0_REQ_SHIFT, |
| RESETN_DDR1_REQ_SHIFT = 12, |
| RESETN_DDR1_REQ_MASK = 1 << RESETN_DDR1_REQ_SHIFT, |
| RESETN_DDRPHY1_REQ_SHIFT = 13, |
| RESETN_DDRPHY1_REQ_MASK = 1 << RESETN_DDRPHY1_REQ_SHIFT, |
| }; |
| |
| #define VCO_MAX_KHZ (3200 * (MHz / KHz)) |
| #define VCO_MIN_KHZ (800 * (MHz / KHz)) |
| #define OUTPUT_MAX_KHZ (3200 * (MHz / KHz)) |
| #define OUTPUT_MIN_KHZ (16 * (MHz / KHz)) |
| |
| /* |
| * the div restructions of pll in integer mode, these are defined in |
| * * CRU_*PLL_CON0 or PMUCRU_*PLL_CON0 |
| */ |
| #define PLL_DIV_MIN 16 |
| #define PLL_DIV_MAX 3200 |
| |
| /* |
| * How to calculate the PLL(from TRM V0.3 Part 1 Page 63): |
| * Formulas also embedded within the Fractional PLL Verilog model: |
| * If DSMPD = 1 (DSM is disabled, "integer mode") |
| * FOUTVCO = FREF / REFDIV * FBDIV |
| * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2 |
| * Where: |
| * FOUTVCO = Fractional PLL non-divided output frequency |
| * FOUTPOSTDIV = Fractional PLL divided output frequency |
| * (output of second post divider) |
| * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input) |
| * REFDIV = Fractional PLL input reference clock divider |
| * FBDIV = Integer value programmed into feedback divide |
| * |
| */ |
| static void rkclk_set_pll(u32 *pll_con, const struct pll_div *div) |
| { |
| /* All 8 PLLs have same VCO and output frequency range restrictions. */ |
| u32 vco_khz = OSC_HZ / 1000 * div->fbdiv / div->refdiv; |
| u32 output_khz = vco_khz / div->postdiv1 / div->postdiv2; |
| |
| debug("PLL at %p: fbdiv=%d, refdiv=%d, postdiv1=%d, " |
| "postdiv2=%d, vco=%u khz, output=%u khz\n", |
| pll_con, div->fbdiv, div->refdiv, div->postdiv1, |
| div->postdiv2, vco_khz, output_khz); |
| assert(vco_khz >= VCO_MIN_KHZ && vco_khz <= VCO_MAX_KHZ && |
| output_khz >= OUTPUT_MIN_KHZ && output_khz <= OUTPUT_MAX_KHZ && |
| div->fbdiv >= PLL_DIV_MIN && div->fbdiv <= PLL_DIV_MAX); |
| |
| /* |
| * When power on or changing PLL setting, |
| * we must force PLL into slow mode to ensure output stable clock. |
| */ |
| rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, |
| PLL_MODE_SLOW << PLL_MODE_SHIFT); |
| |
| /* use integer mode */ |
| rk_clrsetreg(&pll_con[3], PLL_DSMPD_MASK, |
| PLL_INTEGER_MODE << PLL_DSMPD_SHIFT); |
| |
| rk_clrsetreg(&pll_con[0], PLL_FBDIV_MASK, |
| div->fbdiv << PLL_FBDIV_SHIFT); |
| rk_clrsetreg(&pll_con[1], |
| PLL_POSTDIV2_MASK | PLL_POSTDIV1_MASK | |
| PLL_REFDIV_MASK | PLL_REFDIV_SHIFT, |
| (div->postdiv2 << PLL_POSTDIV2_SHIFT) | |
| (div->postdiv1 << PLL_POSTDIV1_SHIFT) | |
| (div->refdiv << PLL_REFDIV_SHIFT)); |
| |
| /* waiting for pll lock */ |
| while (!(readl(&pll_con[2]) & (1 << PLL_LOCK_STATUS_SHIFT))) |
| udelay(1); |
| |
| /* pll enter normal mode */ |
| rk_clrsetreg(&pll_con[3], PLL_MODE_MASK, |
| PLL_MODE_NORM << PLL_MODE_SHIFT); |
| } |
| |
| static int pll_para_config(u32 freq_hz, struct pll_div *div) |
| { |
| u32 ref_khz = OSC_HZ / KHz, refdiv, fbdiv = 0; |
| u32 postdiv1, postdiv2 = 1; |
| u32 fref_khz; |
| u32 diff_khz, best_diff_khz; |
| const u32 max_refdiv = 63, max_fbdiv = 3200, min_fbdiv = 16; |
| const u32 max_postdiv1 = 7, max_postdiv2 = 7; |
| u32 vco_khz; |
| u32 freq_khz = freq_hz / KHz; |
| |
| if (!freq_hz) { |
| printf("%s: the frequency can't be 0 Hz\n", __func__); |
| return -1; |
| } |
| |
| postdiv1 = DIV_ROUND_UP(VCO_MIN_KHZ, freq_khz); |
| if (postdiv1 > max_postdiv1) { |
| postdiv2 = DIV_ROUND_UP(postdiv1, max_postdiv1); |
| postdiv1 = DIV_ROUND_UP(postdiv1, postdiv2); |
| } |
| |
| vco_khz = freq_khz * postdiv1 * postdiv2; |
| |
| if (vco_khz < VCO_MIN_KHZ || vco_khz > VCO_MAX_KHZ || |
| postdiv2 > max_postdiv2) { |
| printf("%s: Cannot find out a supported VCO" |
| " for Frequency (%uHz).\n", __func__, freq_hz); |
| return -1; |
| } |
| |
| div->postdiv1 = postdiv1; |
| div->postdiv2 = postdiv2; |
| |
| best_diff_khz = vco_khz; |
| for (refdiv = 1; refdiv < max_refdiv && best_diff_khz; refdiv++) { |
| fref_khz = ref_khz / refdiv; |
| |
| fbdiv = vco_khz / fref_khz; |
| if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv)) |
| continue; |
| diff_khz = vco_khz - fbdiv * fref_khz; |
| if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) { |
| fbdiv++; |
| diff_khz = fref_khz - diff_khz; |
| } |
| |
| if (diff_khz >= best_diff_khz) |
| continue; |
| |
| best_diff_khz = diff_khz; |
| div->refdiv = refdiv; |
| div->fbdiv = fbdiv; |
| } |
| |
| if (best_diff_khz > 4 * (MHz/KHz)) { |
| printf("%s: Failed to match output frequency %u, " |
| "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz, |
| best_diff_khz * KHz); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void rkclk_init(struct rk3399_cru *cru) |
| { |
| u32 aclk_div; |
| u32 hclk_div; |
| u32 pclk_div; |
| |
| /* |
| * some cru registers changed by bootrom, we'd better reset them to |
| * reset/default values described in TRM to avoid confusion in kernel. |
| * Please consider these three lines as a fix of bootrom bug. |
| */ |
| rk_clrsetreg(&cru->clksel_con[12], 0xffff, 0x4101); |
| rk_clrsetreg(&cru->clksel_con[19], 0xffff, 0x033f); |
| rk_clrsetreg(&cru->clksel_con[56], 0x0003, 0x0003); |
| |
| /* configure gpll cpll */ |
| rkclk_set_pll(&cru->gpll_con[0], &gpll_init_cfg); |
| rkclk_set_pll(&cru->cpll_con[0], &cpll_init_cfg); |
| |
| /* configure perihp aclk, hclk, pclk */ |
| aclk_div = GPLL_HZ / PERIHP_ACLK_HZ - 1; |
| assert((aclk_div + 1) * PERIHP_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); |
| |
| hclk_div = PERIHP_ACLK_HZ / PERIHP_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERIHP_HCLK_HZ == |
| PERIHP_ACLK_HZ && (hclk_div < 0x4)); |
| |
| pclk_div = PERIHP_ACLK_HZ / PERIHP_PCLK_HZ - 1; |
| assert((pclk_div + 1) * PERIHP_PCLK_HZ == |
| PERIHP_ACLK_HZ && (pclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[14], |
| PCLK_PERIHP_DIV_CON_MASK | HCLK_PERIHP_DIV_CON_MASK | |
| ACLK_PERIHP_PLL_SEL_MASK | ACLK_PERIHP_DIV_CON_MASK, |
| pclk_div << PCLK_PERIHP_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERIHP_DIV_CON_SHIFT | |
| ACLK_PERIHP_PLL_SEL_GPLL << ACLK_PERIHP_PLL_SEL_SHIFT | |
| aclk_div << ACLK_PERIHP_DIV_CON_SHIFT); |
| |
| /* configure perilp0 aclk, hclk, pclk */ |
| aclk_div = GPLL_HZ / PERILP0_ACLK_HZ - 1; |
| assert((aclk_div + 1) * PERILP0_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); |
| |
| hclk_div = PERILP0_ACLK_HZ / PERILP0_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERILP0_HCLK_HZ == |
| PERILP0_ACLK_HZ && (hclk_div < 0x4)); |
| |
| pclk_div = PERILP0_ACLK_HZ / PERILP0_PCLK_HZ - 1; |
| assert((pclk_div + 1) * PERILP0_PCLK_HZ == |
| PERILP0_ACLK_HZ && (pclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[23], |
| PCLK_PERILP0_DIV_CON_MASK | HCLK_PERILP0_DIV_CON_MASK | |
| ACLK_PERILP0_PLL_SEL_MASK | ACLK_PERILP0_DIV_CON_MASK, |
| pclk_div << PCLK_PERILP0_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERILP0_DIV_CON_SHIFT | |
| ACLK_PERILP0_PLL_SEL_GPLL << ACLK_PERILP0_PLL_SEL_SHIFT | |
| aclk_div << ACLK_PERILP0_DIV_CON_SHIFT); |
| |
| /* perilp1 hclk select gpll as source */ |
| hclk_div = GPLL_HZ / PERILP1_HCLK_HZ - 1; |
| assert((hclk_div + 1) * PERILP1_HCLK_HZ == |
| GPLL_HZ && (hclk_div < 0x1f)); |
| |
| pclk_div = PERILP1_HCLK_HZ / PERILP1_HCLK_HZ - 1; |
| assert((pclk_div + 1) * PERILP1_HCLK_HZ == |
| PERILP1_HCLK_HZ && (hclk_div < 0x7)); |
| |
| rk_clrsetreg(&cru->clksel_con[25], |
| PCLK_PERILP1_DIV_CON_MASK | HCLK_PERILP1_DIV_CON_MASK | |
| HCLK_PERILP1_PLL_SEL_MASK, |
| pclk_div << PCLK_PERILP1_DIV_CON_SHIFT | |
| hclk_div << HCLK_PERILP1_DIV_CON_SHIFT | |
| HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT); |
| } |
| |
| void rk3399_configure_cpu(struct rk3399_cru *cru, |
| enum apll_l_frequencies apll_l_freq) |
| { |
| u32 aclkm_div; |
| u32 pclk_dbg_div; |
| u32 atclk_div; |
| |
| rkclk_set_pll(&cru->apll_l_con[0], apll_l_cfgs[apll_l_freq]); |
| |
| aclkm_div = APLL_HZ / ACLKM_CORE_HZ - 1; |
| assert((aclkm_div + 1) * ACLKM_CORE_HZ == APLL_HZ && |
| aclkm_div < 0x1f); |
| |
| pclk_dbg_div = APLL_HZ / PCLK_DBG_HZ - 1; |
| assert((pclk_dbg_div + 1) * PCLK_DBG_HZ == APLL_HZ && |
| pclk_dbg_div < 0x1f); |
| |
| atclk_div = APLL_HZ / ATCLK_CORE_HZ - 1; |
| assert((atclk_div + 1) * ATCLK_CORE_HZ == APLL_HZ && |
| atclk_div < 0x1f); |
| |
| rk_clrsetreg(&cru->clksel_con[0], |
| ACLKM_CORE_L_DIV_CON_MASK | CLK_CORE_L_PLL_SEL_MASK | |
| CLK_CORE_L_DIV_MASK, |
| aclkm_div << ACLKM_CORE_L_DIV_CON_SHIFT | |
| CLK_CORE_L_PLL_SEL_ALPLL << CLK_CORE_L_PLL_SEL_SHIFT | |
| 0 << CLK_CORE_L_DIV_SHIFT); |
| |
| rk_clrsetreg(&cru->clksel_con[1], |
| PCLK_DBG_L_DIV_MASK | ATCLK_CORE_L_DIV_MASK, |
| pclk_dbg_div << PCLK_DBG_L_DIV_SHIFT | |
| atclk_div << ATCLK_CORE_L_DIV_SHIFT); |
| } |
| #define I2C_CLK_REG_MASK(bus) \ |
| (I2C_DIV_CON_MASK << \ |
| CLK_I2C ##bus## _DIV_CON_SHIFT | \ |
| CLK_I2C_PLL_SEL_MASK << \ |
| CLK_I2C ##bus## _PLL_SEL_SHIFT) |
| |
| #define I2C_CLK_REG_VALUE(bus, clk_div) \ |
| ((clk_div - 1) << \ |
| CLK_I2C ##bus## _DIV_CON_SHIFT | \ |
| CLK_I2C_PLL_SEL_GPLL << \ |
| CLK_I2C ##bus## _PLL_SEL_SHIFT) |
| |
| #define I2C_CLK_DIV_VALUE(con, bus) \ |
| (con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \ |
| I2C_DIV_CON_MASK; |
| |
| #define I2C_PMUCLK_REG_MASK(bus) \ |
| (I2C_DIV_CON_MASK << \ |
| CLK_I2C ##bus## _DIV_CON_SHIFT) |
| |
| #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \ |
| ((clk_div - 1) << \ |
| CLK_I2C ##bus## _DIV_CON_SHIFT) |
| |
| static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_I2C1: |
| con = readl(&cru->clksel_con[61]); |
| div = I2C_CLK_DIV_VALUE(con, 1); |
| break; |
| case SCLK_I2C2: |
| con = readl(&cru->clksel_con[62]); |
| div = I2C_CLK_DIV_VALUE(con, 2); |
| break; |
| case SCLK_I2C3: |
| con = readl(&cru->clksel_con[63]); |
| div = I2C_CLK_DIV_VALUE(con, 3); |
| break; |
| case SCLK_I2C5: |
| con = readl(&cru->clksel_con[61]); |
| div = I2C_CLK_DIV_VALUE(con, 5); |
| break; |
| case SCLK_I2C6: |
| con = readl(&cru->clksel_con[62]); |
| div = I2C_CLK_DIV_VALUE(con, 6); |
| break; |
| case SCLK_I2C7: |
| con = readl(&cru->clksel_con[63]); |
| div = I2C_CLK_DIV_VALUE(con, 7); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) |
| { |
| int src_clk_div; |
| |
| /* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/ |
| src_clk_div = GPLL_HZ / hz; |
| assert(src_clk_div - 1 < 127); |
| |
| switch (clk_id) { |
| case SCLK_I2C1: |
| rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(1), |
| I2C_CLK_REG_VALUE(1, src_clk_div)); |
| break; |
| case SCLK_I2C2: |
| rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(2), |
| I2C_CLK_REG_VALUE(2, src_clk_div)); |
| break; |
| case SCLK_I2C3: |
| rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(3), |
| I2C_CLK_REG_VALUE(3, src_clk_div)); |
| break; |
| case SCLK_I2C5: |
| rk_clrsetreg(&cru->clksel_con[61], I2C_CLK_REG_MASK(5), |
| I2C_CLK_REG_VALUE(5, src_clk_div)); |
| break; |
| case SCLK_I2C6: |
| rk_clrsetreg(&cru->clksel_con[62], I2C_CLK_REG_MASK(6), |
| I2C_CLK_REG_VALUE(6, src_clk_div)); |
| break; |
| case SCLK_I2C7: |
| rk_clrsetreg(&cru->clksel_con[63], I2C_CLK_REG_MASK(7), |
| I2C_CLK_REG_VALUE(7, src_clk_div)); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(GPLL_HZ, src_clk_div); |
| } |
| |
| static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz) |
| { |
| struct pll_div vpll_config = {0}; |
| int aclk_vop = 198*MHz; |
| void *aclkreg_addr, *dclkreg_addr; |
| u32 div; |
| |
| switch (clk_id) { |
| case DCLK_VOP0: |
| aclkreg_addr = &cru->clksel_con[47]; |
| dclkreg_addr = &cru->clksel_con[49]; |
| break; |
| case DCLK_VOP1: |
| aclkreg_addr = &cru->clksel_con[48]; |
| dclkreg_addr = &cru->clksel_con[50]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| /* vop aclk source clk: cpll */ |
| div = CPLL_HZ / aclk_vop; |
| assert(div - 1 < 32); |
| |
| rk_clrsetreg(aclkreg_addr, |
| ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK, |
| ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT | |
| (div - 1) << ACLK_VOP_DIV_CON_SHIFT); |
| |
| /* vop dclk source from vpll, and equals to vpll(means div == 1) */ |
| if (pll_para_config(hz, &vpll_config)) |
| return -1; |
| |
| rkclk_set_pll(&cru->vpll_con[0], &vpll_config); |
| |
| rk_clrsetreg(dclkreg_addr, |
| DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK| |
| DCLK_VOP_DIV_CON_MASK, |
| DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT | |
| DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT | |
| (1 - 1) << DCLK_VOP_DIV_CON_SHIFT); |
| |
| return hz; |
| } |
| |
| static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_SDMMC: |
| con = readl(&cru->clksel_con[16]); |
| break; |
| case SCLK_EMMC: |
| con = readl(&cru->clksel_con[21]); |
| break; |
| default: |
| return -EINVAL; |
| } |
| div = (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; |
| |
| if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT |
| == CLK_EMMC_PLL_SEL_24M) |
| return DIV_TO_RATE(24*1024*1024, div); |
| else |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, |
| ulong clk_id, ulong set_rate) |
| { |
| int src_clk_div; |
| int aclk_emmc = 198*MHz; |
| |
| switch (clk_id) { |
| case SCLK_SDMMC: |
| /* Select clk_sdmmc source from GPLL by default */ |
| src_clk_div = GPLL_HZ / set_rate; |
| |
| if (src_clk_div > 127) { |
| /* use 24MHz source for 400KHz clock */ |
| src_clk_div = 24*1024*1024 / set_rate; |
| rk_clrsetreg(&cru->clksel_con[16], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| } else { |
| rk_clrsetreg(&cru->clksel_con[16], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| } |
| break; |
| case SCLK_EMMC: |
| /* Select aclk_emmc source from GPLL */ |
| src_clk_div = GPLL_HZ / aclk_emmc; |
| assert(src_clk_div - 1 < 31); |
| |
| rk_clrsetreg(&cru->clksel_con[21], |
| ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK, |
| ACLK_EMMC_PLL_SEL_GPLL << ACLK_EMMC_PLL_SEL_SHIFT | |
| (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT); |
| |
| /* Select clk_emmc source from GPLL too */ |
| src_clk_div = GPLL_HZ / set_rate; |
| assert(src_clk_div - 1 < 127); |
| |
| rk_clrsetreg(&cru->clksel_con[22], |
| CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, |
| CLK_EMMC_PLL_SEL_GPLL << CLK_EMMC_PLL_SHIFT | |
| (src_clk_div - 1) << CLK_EMMC_DIV_CON_SHIFT); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return rk3399_mmc_get_clk(cru, clk_id); |
| } |
| |
| static ulong rk3399_clk_get_rate(struct clk *clk) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| switch (clk->id) { |
| case 0 ... 63: |
| return 0; |
| case SCLK_SDMMC: |
| case SCLK_EMMC: |
| rate = rk3399_mmc_get_clk(priv->cru, clk->id); |
| break; |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| case SCLK_I2C5: |
| case SCLK_I2C6: |
| case SCLK_I2C7: |
| rate = rk3399_i2c_get_clk(priv->cru, clk->id); |
| break; |
| case DCLK_VOP0: |
| case DCLK_VOP1: |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| switch (clk->id) { |
| case 0 ... 63: |
| return 0; |
| case SCLK_SDMMC: |
| case SCLK_EMMC: |
| ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate); |
| break; |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| case SCLK_I2C5: |
| case SCLK_I2C6: |
| case SCLK_I2C7: |
| ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate); |
| break; |
| case DCLK_VOP0: |
| case DCLK_VOP1: |
| ret = rk3399_vop_set_clk(priv->cru, clk->id, rate); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return ret; |
| } |
| |
| static struct clk_ops rk3399_clk_ops = { |
| .get_rate = rk3399_clk_get_rate, |
| .set_rate = rk3399_clk_set_rate, |
| }; |
| |
| static int rk3399_clk_probe(struct udevice *dev) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(dev); |
| |
| rkclk_init(priv->cru); |
| |
| return 0; |
| } |
| |
| static int rk3399_clk_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct rk3399_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->cru = (struct rk3399_cru *)dev_get_addr(dev); |
| |
| return 0; |
| } |
| |
| static int rk3399_clk_bind(struct udevice *dev) |
| { |
| int ret; |
| |
| /* The reset driver does not have a device node, so bind it here */ |
| ret = device_bind_driver(gd->dm_root, "rk3399_sysreset", "reset", &dev); |
| if (ret) |
| printf("Warning: No RK3399 reset driver: ret=%d\n", ret); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id rk3399_clk_ids[] = { |
| { .compatible = "rockchip,rk3399-cru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(clk_rk3399) = { |
| .name = "clk_rk3399", |
| .id = UCLASS_CLK, |
| .of_match = rk3399_clk_ids, |
| .priv_auto_alloc_size = sizeof(struct rk3399_clk_priv), |
| .ofdata_to_platdata = rk3399_clk_ofdata_to_platdata, |
| .ops = &rk3399_clk_ops, |
| .bind = rk3399_clk_bind, |
| .probe = rk3399_clk_probe, |
| }; |
| |
| static ulong rk3399_i2c_get_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| con = readl(&pmucru->pmucru_clksel[2]); |
| div = I2C_CLK_DIV_VALUE(con, 0); |
| break; |
| case SCLK_I2C4_PMU: |
| con = readl(&pmucru->pmucru_clksel[3]); |
| div = I2C_CLK_DIV_VALUE(con, 4); |
| break; |
| case SCLK_I2C8_PMU: |
| con = readl(&pmucru->pmucru_clksel[2]); |
| div = I2C_CLK_DIV_VALUE(con, 8); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(PPLL_HZ, div); |
| } |
| |
| static ulong rk3399_i2c_set_pmuclk(struct rk3399_pmucru *pmucru, ulong clk_id, |
| uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = PPLL_HZ / hz; |
| assert(src_clk_div - 1 < 127); |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(0), |
| I2C_PMUCLK_REG_VALUE(0, src_clk_div)); |
| break; |
| case SCLK_I2C4_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[3], I2C_PMUCLK_REG_MASK(4), |
| I2C_PMUCLK_REG_VALUE(4, src_clk_div)); |
| break; |
| case SCLK_I2C8_PMU: |
| rk_clrsetreg(&pmucru->pmucru_clksel[2], I2C_PMUCLK_REG_MASK(8), |
| I2C_PMUCLK_REG_VALUE(8, src_clk_div)); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(PPLL_HZ, src_clk_div); |
| } |
| |
| static ulong rk3399_pwm_get_clk(struct rk3399_pmucru *pmucru) |
| { |
| u32 div, con; |
| |
| /* PWM closk rate is same as pclk_pmu */ |
| con = readl(&pmucru->pmucru_clksel[0]); |
| div = con & PMU_PCLK_DIV_CON_MASK; |
| |
| return DIV_TO_RATE(PPLL_HZ, div); |
| } |
| |
| static ulong rk3399_pmuclk_get_rate(struct clk *clk) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate = 0; |
| |
| switch (clk->id) { |
| case PCLK_RKPWM_PMU: |
| rate = rk3399_pwm_get_clk(priv->pmucru); |
| break; |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C4_PMU: |
| case SCLK_I2C8_PMU: |
| rate = rk3399_i2c_get_pmuclk(priv->pmucru, clk->id); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong rk3399_pmuclk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(clk->dev); |
| ulong ret = 0; |
| |
| switch (clk->id) { |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C4_PMU: |
| case SCLK_I2C8_PMU: |
| ret = rk3399_i2c_set_pmuclk(priv->pmucru, clk->id, rate); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return ret; |
| } |
| |
| static struct clk_ops rk3399_pmuclk_ops = { |
| .get_rate = rk3399_pmuclk_get_rate, |
| .set_rate = rk3399_pmuclk_set_rate, |
| }; |
| |
| static void pmuclk_init(struct rk3399_pmucru *pmucru) |
| { |
| u32 pclk_div; |
| |
| /* configure pmu pll(ppll) */ |
| rkclk_set_pll(&pmucru->ppll_con[0], &ppll_init_cfg); |
| |
| /* configure pmu pclk */ |
| pclk_div = PPLL_HZ / PMU_PCLK_HZ - 1; |
| assert((pclk_div + 1) * PMU_PCLK_HZ == PPLL_HZ && pclk_div < 0x1f); |
| rk_clrsetreg(&pmucru->pmucru_clksel[0], |
| PMU_PCLK_DIV_CON_MASK, |
| pclk_div << PMU_PCLK_DIV_CON_SHIFT); |
| } |
| |
| static int rk3399_pmuclk_probe(struct udevice *dev) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); |
| |
| pmuclk_init(priv->pmucru); |
| |
| return 0; |
| } |
| |
| static int rk3399_pmuclk_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); |
| |
| priv->pmucru = (struct rk3399_pmucru *)dev_get_addr(dev); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id rk3399_pmuclk_ids[] = { |
| { .compatible = "rockchip,rk3399-pmucru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_rk3399_pmuclk) = { |
| .name = "pmuclk_rk3399", |
| .id = UCLASS_CLK, |
| .of_match = rk3399_pmuclk_ids, |
| .priv_auto_alloc_size = sizeof(struct rk3399_pmuclk_priv), |
| .ofdata_to_platdata = rk3399_pmuclk_ofdata_to_platdata, |
| .ops = &rk3399_pmuclk_ops, |
| .probe = rk3399_pmuclk_probe, |
| }; |