| /* |
| * Copyright 2015-2016 Freescale Semiconductor, Inc. |
| * Copyright 2017 NXP |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| */ |
| |
| #include <dt-bindings/clock/imx7d-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include "imx7d-pinfunc.h" |
| #include "imx7d-pinfunc-lpsr.h" |
| #include "skeleton.dtsi" |
| |
| / { |
| aliases { |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| gpio5 = &gpio6; |
| gpio6 = &gpio7; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| i2c3 = &i2c4; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc3; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| serial5 = &uart6; |
| serial6 = &uart7; |
| spi1 = &qspi1; |
| spi2 = &ecspi1; |
| spi3 = &ecspi2; |
| spi4 = &ecspi3; |
| spi5 = &ecspi4; |
| usb0 = &usbotg1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| operating-points = < |
| /* KHz uV */ |
| 1200000 1225000 |
| 996000 1075000 |
| 792000 975000 |
| >; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, |
| <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; |
| clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| intc: interrupt-controller@31001000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x31001000 0x1000>, |
| <0x31002000 0x100>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil: clock@0 { |
| compatible = "fixed-clock"; |
| reg = <0>; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "ckil"; |
| }; |
| |
| osc: clock@1 { |
| compatible = "fixed-clock"; |
| reg = <1>; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc"; |
| }; |
| |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| arm,cpu-registers-not-fw-configured; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| interrupt-parent = <&intc>; |
| clock-frequency = <8000000>; |
| }; |
| |
| etr@0,30086000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x30086000 0x1000>; |
| |
| coresight-default-sink; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| port{ |
| etr_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| |
| tpiu@0,30087000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0x30087000 0x1000>; |
| |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| port { |
| tpiu_in_port: endpoint@0 { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| |
| replicator { |
| /* non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell". |
| */ |
| compatible = "arm,coresight-replicator"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator_out_port0: endpoint { |
| remote-endpoint = <&tpiu_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator_out_port1: endpoint { |
| remote-endpoint = <&etr_in_port>; |
| }; |
| }; |
| |
| /* replicator input port */ |
| port@2 { |
| reg = <0>; |
| replicator_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&etf_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| etf@0,30084000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x30084000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| ports{ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0{ |
| reg = <0>; |
| etf_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&hugo_funnel_out_port0>; |
| }; |
| }; |
| port@1{ |
| reg = <0>; |
| etf_out_port: endpoint { |
| remote-endpoint = <&replicator_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@1,30083000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x30083000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* funnel input ports */ |
| port@0 { |
| reg = <0>; |
| hugo_funnel_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&ca_funnel_out_port0>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| hugo_funnel_in_port1: endpoint { |
| slave-mode; /* M4 input */ |
| }; |
| }; |
| port@2 { |
| reg = <0>; |
| hugo_funnel_out_port0: endpoint { |
| remote-endpoint = <&etf_in_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@0,30041000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x30041000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* funnel input ports */ |
| port@0 { |
| reg = <0>; |
| ca_funnel_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm0_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| ca_funnel_in_port1: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm1_out_port>; |
| }; |
| }; |
| |
| /* funnel output port */ |
| port@2 { |
| reg = <0>; |
| ca_funnel_out_port0: endpoint { |
| remote-endpoint = |
| <&hugo_funnel_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm@0,3007c000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x3007c000 0x1000>; |
| |
| cpu = <&cpu0>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| port { |
| etm0_out_port: endpoint { |
| remote-endpoint = <&ca_funnel_in_port0>; |
| }; |
| }; |
| }; |
| |
| etm@1,3007d000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x3007d000 0x1000>; |
| arm,primecell-periphid = <0xbb956>; |
| |
| cpu = <&cpu1>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| port { |
| etm1_out_port: endpoint { |
| remote-endpoint = <&ca_funnel_in_port1>; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* global autoconfigured region for contiguous allocations */ |
| linux,cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0x14000000>; |
| linux,cma-default; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gpc>; |
| ranges; |
| |
| busfreq { |
| compatible = "fsl,imx_busfreq"; |
| fsl,max_ddr_freq = <533000000>; |
| clocks = <&clks IMX7D_OSC_24M_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_SRC>, |
| <&clks IMX7D_AHB_CHANNEL_ROOT_SRC>, <&clks IMX7D_PLL_SYS_PFD0_392M_CLK>, |
| <&clks IMX7D_DRAM_ROOT_SRC>, <&clks IMX7D_DRAM_ALT_ROOT_SRC>, |
| <&clks IMX7D_PLL_DRAM_MAIN_CLK>, <&clks IMX7D_DRAM_ALT_ROOT_CLK>, |
| <&clks IMX7D_PLL_SYS_PFD2_270M_CLK>, <&clks IMX7D_PLL_SYS_PFD1_332M_CLK>, |
| <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>, <&clks IMX7D_MAIN_AXI_ROOT_DIV>; |
| clock-names = "osc", "axi_sel", "ahb_sel", "pfd0_392m", "dram_root", "dram_alt_sel", |
| "pll_dram", "dram_alt_root", "pfd2_270m", "pfd1_332m", "ahb", "axi"; |
| interrupts = <0 112 0x04>, <0 113 0x04>; |
| interrupt-names = "irq_busfreq_0", "irq_busfreq_1"; |
| }; |
| |
| caam_sm: caam-sm@00100000 { |
| compatible = "fsl,imx7d-caam-sm", "fsl,imx6q-caam-sm"; |
| reg = <0x00100000 0x3fff>; |
| }; |
| |
| irq_sec_vio: caam_secvio { |
| compatible = "fsl,imx7d-caam-secvio", "fsl,imx6q-caam-secvio"; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| jtag-tamper = "disabled"; |
| watchdog-tamper = "enabled"; |
| internal-boot-tamper = "enabled"; |
| external-pin-tamper = "disabled"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| ocrams_ddr: sram@00900000 { |
| compatible = "fsl,ddr-lpm-sram"; |
| reg = <0x00900000 0x1000>; |
| clocks = <&clks IMX7D_OCRAM_CLK>; |
| }; |
| |
| ocram: sram@901000 { |
| compatible = "mmio-sram"; |
| reg = <0x00901000 0x1f000>; |
| clocks = <&clks IMX7D_OCRAM_CLK>; |
| }; |
| |
| ocrams: sram@00180000 { |
| compatible = "fsl,lpm-sram"; |
| reg = <0x00180000 0x8000>; |
| clocks = <&clks IMX7D_OCRAM_S_CLK>; |
| status = "disabled"; |
| }; |
| |
| ocrams_mf: sram-mf@00900000 { |
| compatible = "fsl,mega-fast-sram"; |
| reg = <0x00900000 0x20000>; |
| clocks = <&clks IMX7D_OCRAM_CLK>; |
| }; |
| |
| dma_apbh: dma-apbh@33000000 { |
| compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; |
| reg = <0x33000000 0x2000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| clocks = <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, |
| <&clks IMX7D_NAND_ROOT_CLK>; |
| clock-names = "dma_apbh_bch", "dma_apbh_io"; |
| }; |
| |
| gpmi: gpmi-nand@33002000{ |
| compatible = "fsl,imx7d-gpmi-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x33002000 0x2000>, <0x33004000 0x4000>; |
| reg-names = "gpmi-nand", "bch"; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "bch"; |
| clocks = <&clks IMX7D_NAND_ROOT_CLK>, |
| <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>; |
| clock-names = "gpmi_io", "gpmi_bch_apb"; |
| dmas = <&dma_apbh 0>; |
| dma-names = "rx-tx"; |
| status = "disabled"; |
| }; |
| |
| aips1: aips-bus@30000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30000000 0x400000>; |
| ranges; |
| |
| gpio1: gpio@30200000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30200000 0x10000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ |
| <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@30210000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30210000 0x10000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@30220000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30220000 0x10000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@30230000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30230000 0x10000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio5: gpio@30240000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30240000 0x10000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio6: gpio@30250000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30250000 0x10000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio7: gpio@30260000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30260000 0x10000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| iomuxc_lpsr_gpr: lpsr-gpr@30270000 { |
| compatible = "fsl,imx7d-lpsr-gpr"; |
| reg = <0x30270000 0x10000>; |
| }; |
| |
| wdog1: wdog@30280000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x30280000 0x10000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; |
| }; |
| |
| wdog2: wdog@30290000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x30290000 0x10000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| wdog3: wdog@302a0000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x302a0000 0x10000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| wdog4: wdog@302b0000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x302b0000 0x10000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| iomuxc_lpsr: iomuxc-lpsr@302c0000 { |
| compatible = "fsl,imx7d-iomuxc-lpsr"; |
| reg = <0x302c0000 0x10000>; |
| fsl,input-sel = <&iomuxc>; |
| }; |
| |
| gpt1: gpt@302d0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; |
| reg = <0x302d0000 0x10000>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_GPT1_ROOT_CLK>, |
| <&clks IMX7D_GPT1_ROOT_CLK>, |
| <&clks IMX7D_GPT_3M_CLK>; |
| clock-names = "ipg", "per", "osc_per"; |
| }; |
| |
| gpt2: gpt@302e0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; |
| reg = <0x302e0000 0x10000>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| gpt3: gpt@302f0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; |
| reg = <0x302f0000 0x10000>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| gpt4: gpt@30300000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx31-gpt"; |
| reg = <0x30300000 0x10000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| kpp: kpp@30320000 { |
| compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; |
| reg = <0x30320000 0x10000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@30330000 { |
| compatible = "fsl,imx7d-iomuxc"; |
| reg = <0x30330000 0x10000>; |
| }; |
| |
| gpr: iomuxc-gpr@30340000 { |
| compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; |
| reg = <0x30340000 0x10000>; |
| }; |
| |
| mqs: mqs { |
| compatible = "fsl,imx6sx-mqs"; |
| gpr = <&gpr>; |
| status = "disabled"; |
| }; |
| |
| ocotp: ocotp-ctrl@30350000 { |
| compatible = "fsl,imx7d-ocotp", "syscon"; |
| reg = <0x30350000 0x10000>; |
| clocks = <&clks IMX7D_OCOTP_CLK>; |
| }; |
| |
| anatop: anatop@30360000 { |
| compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", |
| "syscon", "simple-bus"; |
| reg = <0x30360000 0x10000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| |
| reg_1p0d: regulator-vdd1p0d@210 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd1p0d"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1200000>; |
| anatop-reg-offset = <0x210>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <8>; |
| anatop-min-voltage = <800000>; |
| anatop-max-voltage = <1200000>; |
| anatop-enable-bit = <0>; |
| }; |
| |
| reg_1p2: regulator-vdd1p2@220 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd1p2"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1300000>; |
| anatop-reg-offset = <0x220>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <8>; |
| anatop-min-voltage = <1100000>; |
| anatop-max-voltage = <1300000>; |
| anatop-enable-bit = <31>; |
| }; |
| }; |
| |
| tempmon: tempmon { |
| compatible = "fsl,imx7d-tempmon"; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,tempmon =<&anatop>; |
| fsl,tempmon-data = <&ocotp>; |
| clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; |
| }; |
| |
| caam_snvs: caam-snvs@30370000 { |
| compatible = "fsl,imx6q-caam-snvs"; |
| reg = <0x30370000 0x10000>; |
| }; |
| |
| snvs: snvs@30370000 { |
| compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; |
| reg = <0x30370000 0x10000>; |
| |
| snvs_rtc: snvs-rtc-lp{ |
| compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| regmap =<&snvs>; |
| offset = <0x34>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| snvs_pwrkey: snvs-powerkey { |
| compatible = "fsl,sec-v4.0-pwrkey"; |
| regmap = <&snvs>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| linux,keycode = <KEY_POWER>; |
| wakeup; |
| }; |
| |
| snvs_poweroff: snvs-poweroff { |
| compatible = "syscon-poweroff"; |
| regmap = <&snvs>; |
| offset = <0x38>; |
| mask = <0x61>; |
| }; |
| }; |
| |
| clks: ccm@30380000 { |
| compatible = "fsl,imx7d-ccm"; |
| reg = <0x30380000 0x10000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <1>; |
| clocks = <&ckil>, <&osc>; |
| clock-names = "ckil", "osc"; |
| }; |
| |
| src: src@30390000 { |
| compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; |
| reg = <0x30390000 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| #reset-cells = <1>; |
| }; |
| |
| gpc: gpc@303a0000 { |
| compatible = "fsl,imx7d-gpc"; |
| reg = <0x303a0000 0x10000>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&intc>; |
| fsl,mf-mix-wakeup-irq = <0x54010000 0xc00 0x0 0x1040640>; |
| mipi-phy-supply = <®_1p0d>; |
| pcie-phy-supply = <®_1p0d>; |
| vcc-supply = <®_1p2>; |
| }; |
| }; |
| |
| aips2: aips-bus@30400000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30400000 0x400000>; |
| ranges; |
| |
| adc1: adc@30610000 { |
| compatible = "fsl,imx7d-adc"; |
| reg = <0x30610000 0x10000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ADC_ROOT_CLK>; |
| num-channels = <4>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| adc2: adc@30620000 { |
| compatible = "fsl,imx7d-adc"; |
| reg = <0x30620000 0x10000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ADC_ROOT_CLK>; |
| num-channels = <4>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| ecspi4: ecspi@30630000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30630000 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, |
| <&clks IMX7D_ECSPI4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| flextimer1: flextimer@30640000 { |
| compatible = "fsl,imx7d-flextimer"; |
| reg = <0x30640000 0x10000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| flextimer2: flextimer@30650000 { |
| compatible = "fsl,imx7d-flextimer"; |
| reg = <0x30650000 0x10000>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@30660000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30660000 0x10000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM1_ROOT_CLK>, |
| <&clks IMX7D_PWM1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@30670000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30670000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM2_ROOT_CLK>, |
| <&clks IMX7D_PWM2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@30680000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30680000 0x10000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM3_ROOT_CLK>, |
| <&clks IMX7D_PWM3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@30690000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30690000 0x10000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM4_ROOT_CLK>, |
| <&clks IMX7D_PWM4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| system_counter_rd: system-counter-rd@306a0000 { |
| compatible = "fsl,imx7d-system-counter-rd"; |
| reg = <0x306a0000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| system_counter_cmp: system-counter-cmp@306b0000 { |
| compatible = "fsl,imx7d-system-counter-cmp"; |
| reg = <0x306b0000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| system_counter_ctrl: system-counter-ctrl@306c0000 { |
| compatible = "fsl,imx7d-system-counter-ctrl"; |
| reg = <0x306c0000 0x10000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pcie_phy: pcie-phy@306d0000 { |
| compatible = "fsl,imx-pcie-phy"; |
| reg = <0x306d0000 0x10000>; |
| status = "disabled"; |
| }; |
| |
| epdc: epdc@306f0000 { |
| compatible = "fsl,imx7d-epdc"; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x306f0000 0x10000>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>; |
| clock-names = "epdc_axi", "epdc_pix"; |
| epdc-ram = <&gpr 0x4 30>; |
| status = "disabled"; |
| }; |
| |
| epxp: epxp@30700000 { |
| compatible = "fsl,imx7d-pxp-dma"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x30700000 0x10000>; |
| clocks = <&clks IMX7D_PXP_IPG_CLK>, <&clks IMX7D_PXP_AXI_CLK>; |
| clock-names = "pxp_ipg", "pxp_axi"; |
| status = "disabled"; |
| }; |
| |
| csi1: csi@30710000 { |
| compatible = "fsl,imx7d-csi", "fsl,imx6s-csi"; |
| reg = <0x30710000 0x10000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CSI_MCLK_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "disp-axi", "csi_mclk", "disp_dcic"; |
| status = "disabled"; |
| }; |
| |
| lcdif: lcdif@30730000 { |
| compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; |
| reg = <0x30730000 0x10000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "pix", "axi", "disp_axi"; |
| status = "disabled"; |
| }; |
| |
| mipi_csi: mipi-csi@30750000 { |
| compatible = "fsl,imx7d-mipi-csi"; |
| reg = <0x30750000 0x10000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_MIPI_CSI_ROOT_CLK>, |
| <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; |
| clock-names = "mipi_clk", "phy_clk"; |
| mipi-phy-supply = <®_1p0d>; |
| csis-phy-reset = <&src 0x28 2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| mipi_dsi: mipi-dsi@30760000 { |
| compatible = "fsl,imx7d-mipi-dsi"; |
| reg = <0x30760000 0x10000>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, |
| <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; |
| clock-names = "mipi_cfg_clk", "mipi_pllref_clk"; |
| mipi-phy-supply = <®_1p0d>; |
| status = "disabled"; |
| }; |
| |
| ddrc: ddrc@307a0000 { |
| compatible = "fsl,imx7-ddrc"; |
| reg = <0x307a0000 0x10000>; |
| }; |
| }; |
| |
| aips3: aips-bus@30800000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30800000 0x400000>; |
| ranges; |
| |
| spba-bus@30800000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30800000 0x100000>; |
| ranges; |
| |
| ecspi1: ecspi@30820000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30820000 0x10000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, |
| <&clks IMX7D_ECSPI1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ecspi2: ecspi@30830000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30830000 0x10000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, |
| <&clks IMX7D_ECSPI2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ecspi3: ecspi@30840000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30840000 0x10000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, |
| <&clks IMX7D_ECSPI3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@30860000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30860000 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART1_ROOT_CLK>, |
| <&clks IMX7D_UART1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 22 4 0>, <&sdma 23 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@30890000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30890000 0x10000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART2_ROOT_CLK>, |
| <&clks IMX7D_UART2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 24 4 0>, <&sdma 25 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@30880000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30880000 0x10000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART3_ROOT_CLK>, |
| <&clks IMX7D_UART3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 26 4 0>, <&sdma 27 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sai1: sai@308a0000 { |
| compatible = "fsl,imx7d-sai", |
| "fsl,imx6sx-sai"; |
| reg = <0x308a0000 0x10000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI1_IPG_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_SAI1_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@308b0000 { |
| compatible = "fsl,imx7d-sai", |
| "fsl,imx6sx-sai"; |
| reg = <0x308b0000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI2_IPG_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_SAI2_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; |
| status = "disabled"; |
| }; |
| |
| sai3: sai@308c0000 { |
| compatible = "fsl,imx7d-sai", |
| "fsl,imx6sx-sai"; |
| reg = <0x308c0000 0x10000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI3_IPG_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_SAI3_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| crypto: caam@30900000 { |
| compatible = "fsl,imx7d-caam", "fsl,sec-v4.0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30900000 0x40000>; |
| ranges = <0 0x30900000 0x40000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CAAM_CLK>, |
| <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; |
| clock-names = "caam_ipg", "caam_aclk"; |
| |
| sec_jr0: jr0@1000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x1000 0x1000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr1: jr1@2000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x2000 0x1000>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr2: jr2@3000 { |
| compatible = "fsl,sec-v4.0-job-ring"; |
| reg = <0x3000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| flexcan1: can@30a00000 { |
| compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; |
| reg = <0x30a00000 0x10000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CAN1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| stop-mode = <&gpr 0x10 1 0x10 17>; |
| status = "disabled"; |
| }; |
| |
| flexcan2: can@30a10000 { |
| compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; |
| reg = <0x30a10000 0x10000>; |
| interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CAN2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| stop-mode = <&gpr 0x10 2 0x10 18>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@30a20000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a20000 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C1_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@30a30000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a30000 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C2_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@30a40000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a40000 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C3_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@30a50000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a50000 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C4_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@30a60000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30a60000 0x10000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART4_ROOT_CLK>, |
| <&clks IMX7D_UART4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 28 4 0>, <&sdma 29 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@30a70000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30a70000 0x10000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART5_ROOT_CLK>, |
| <&clks IMX7D_UART5_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 30 4 0>, <&sdma 31 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@30a80000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30a80000 0x10000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART6_ROOT_CLK>, |
| <&clks IMX7D_UART6_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 32 4 0>, <&sdma 33 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@30a90000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x30a90000 0x10000>; |
| interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART7_ROOT_CLK>, |
| <&clks IMX7D_UART7_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma 34 4 0>, <&sdma 35 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| mu: mu@30aa0000 { |
| compatible = "fsl,imx7d-mu", "fsl,imx6sx-mu"; |
| reg = <0x30aa0000 0x10000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_MU_ROOT_CLK>; |
| clock-names = "mu"; |
| status = "okay"; |
| }; |
| |
| rpmsg: rpmsg{ |
| compatible = "fsl,imx7d-rpmsg"; |
| status = "disabled"; |
| }; |
| |
| sema4: sema4@30ac0000 { |
| compatible = "fsl,imx7d-sema4"; |
| reg = <0x30ac0000 0x10000>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SEMA4_HS_ROOT_CLK>; |
| clock-names = "sema4"; |
| status = "okay"; |
| }; |
| |
| usbotg1: usb@30b10000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b10000 0x200>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphy_nop1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| phy-clkgate-delay-us = <400>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| status = "disabled"; |
| }; |
| |
| usbotg2: usb@30b20000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b20000 0x200>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphy_nop2>; |
| fsl,usbmisc = <&usbmisc2 0>; |
| phy-clkgate-delay-us = <400>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| status = "disabled"; |
| }; |
| |
| usbh: usb@30b30000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b30000 0x200>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphy_nop3>; |
| fsl,usbmisc = <&usbmisc3 0>; |
| phy_type = "hsic"; |
| dr_mode = "host"; |
| phy-clkgate-delay-us = <400>; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usbmisc@30b10200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b10200 0x200>; |
| }; |
| |
| usbmisc2: usbmisc@30b20200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b20200 0x200>; |
| }; |
| |
| usbmisc3: usbmisc@30b30200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b30200 0x200>; |
| }; |
| |
| usbphy_nop1: usbphy_nop1 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_PHY1_CLK>; |
| clock-names = "main_clk"; |
| }; |
| |
| usbphy_nop2: usbphy_nop2 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_PHY2_CLK>; |
| clock-names = "main_clk"; |
| }; |
| |
| usbphy_nop3: usbphy_nop3 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; |
| clock-names = "main_clk"; |
| vcc-supply = <®_1p2>; |
| }; |
| |
| usdhc1: usdhc@30b40000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; |
| reg = <0x30b40000 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_IPG_ROOT_CLK>, |
| <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, |
| <&clks IMX7D_USDHC1_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step= <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: usdhc@30b50000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x30b50000 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_IPG_ROOT_CLK>, |
| <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, |
| <&clks IMX7D_USDHC2_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step= <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: usdhc@30b60000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sx-usdhc"; |
| reg = <0x30b60000 0x10000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_IPG_ROOT_CLK>, |
| <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, |
| <&clks IMX7D_USDHC3_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step= <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sim1: sim@30b90000 { |
| compatible = "fsl,imx7d-sim"; |
| reg = <0x30b90000 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SIM1_ROOT_CLK>; |
| clock-names = "sim"; |
| status = "disabled"; |
| }; |
| |
| sim2: sim@30ba0000 { |
| compatible = "fsl,imx7d-sim"; |
| reg = <0x30ba0000 0x10000>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| qspi1: qspi@30bb0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-qspi"; |
| reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_QSPI_ROOT_CLK>, |
| <&clks IMX7D_QSPI_ROOT_CLK>; |
| clock-names = "qspi_en", "qspi"; |
| status = "disabled"; |
| }; |
| |
| weim: weim@30bc0000 { |
| compatible = "fsl,imx7d-weim", "fsl,imx6sx-weim", "fsl,imx6q-weim"; |
| reg = <0x30bc0000 0x10000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_EIM_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| sdma: sdma@30bd0000 { |
| compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; |
| reg = <0x30bd0000 0x10000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SDMA_CORE_CLK>, |
| <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| iram = <&ocram>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| }; |
| |
| fec1: ethernet@30be0000 { |
| compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; |
| reg = <0x30be0000 0x10000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>, |
| <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, |
| <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| stop-mode = <&gpr 0x10 3>; |
| fsl,num-tx-queues=<3>; |
| fsl,num-rx-queues=<3>; |
| fsl,wakeup_irq = <2>; |
| status = "disabled"; |
| }; |
| |
| fec2: ethernet@30bf0000 { |
| compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; |
| reg = <0x30bf0000 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>, |
| <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, |
| <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| stop-mode = <&gpr 0x10 4>; |
| fsl,num-tx-queues=<3>; |
| fsl,num-rx-queues=<3>; |
| fsl,wakeup_irq = <2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pcie: pcie@0x33800000 { |
| compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; |
| reg = <0x33800000 0x4000>, <0x4ff00000 0x80000>; |
| reg-names = "dbi", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O 64KB */ |
| 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ |
| num-lanes = <1>; |
| interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, |
| <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, |
| <&clks IMX7D_PCIE_PHY_ROOT_CLK>; |
| clock-names = "pcie", "pcie_bus", "pcie_phy"; |
| pcie-phy-supply = <®_1p0d>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
