| /* |
| * (C) Copyright 2001-2015 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * Joe Hershberger, National Instruments |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <miiphy.h> |
| #include <net.h> |
| #include "eth_internal.h" |
| |
| void eth_parse_enetaddr(const char *addr, uchar *enetaddr) |
| { |
| char *end; |
| int i; |
| |
| for (i = 0; i < 6; ++i) { |
| enetaddr[i] = addr ? simple_strtoul(addr, &end, 16) : 0; |
| if (addr) |
| addr = (*end) ? end + 1 : end; |
| } |
| } |
| |
| int eth_getenv_enetaddr(const char *name, uchar *enetaddr) |
| { |
| eth_parse_enetaddr(getenv(name), enetaddr); |
| return is_valid_ethaddr(enetaddr); |
| } |
| |
| int eth_setenv_enetaddr(const char *name, const uchar *enetaddr) |
| { |
| char buf[ARP_HLEN_ASCII + 1]; |
| |
| sprintf(buf, "%pM", enetaddr); |
| |
| return setenv(name, buf); |
| } |
| |
| int eth_getenv_enetaddr_by_index(const char *base_name, int index, |
| uchar *enetaddr) |
| { |
| char enetvar[32]; |
| sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); |
| return eth_getenv_enetaddr(enetvar, enetaddr); |
| } |
| |
| int eth_setenv_enetaddr_by_index(const char *base_name, int index, |
| uchar *enetaddr) |
| { |
| char enetvar[32]; |
| sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); |
| return eth_setenv_enetaddr(enetvar, enetaddr); |
| } |
| |
| void eth_common_init(void) |
| { |
| bootstage_mark(BOOTSTAGE_ID_NET_ETH_START); |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) |
| miiphy_init(); |
| #endif |
| |
| #ifdef CONFIG_PHYLIB |
| phy_init(); |
| #endif |
| } |
| |
| int eth_mac_skip(int index) |
| { |
| char enetvar[15]; |
| char *skip_state; |
| |
| sprintf(enetvar, index ? "eth%dmacskip" : "ethmacskip", index); |
| skip_state = getenv(enetvar); |
| return skip_state != NULL; |
| } |
| |
| void eth_current_changed(void) |
| { |
| char *act = getenv("ethact"); |
| char *ethrotate; |
| |
| /* |
| * The call to eth_get_dev() below has a side effect of rotating |
| * ethernet device if uc_priv->current == NULL. This is not what |
| * we want when 'ethrotate' variable is 'no'. |
| */ |
| ethrotate = getenv("ethrotate"); |
| if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) |
| return; |
| |
| /* update current ethernet name */ |
| if (eth_get_dev()) { |
| if (act == NULL || strcmp(act, eth_get_name()) != 0) |
| setenv("ethact", eth_get_name()); |
| } |
| /* |
| * remove the variable completely if there is no active |
| * interface |
| */ |
| else if (act != NULL) |
| setenv("ethact", NULL); |
| } |
| |
| void eth_try_another(int first_restart) |
| { |
| static void *first_failed; |
| char *ethrotate; |
| |
| /* |
| * Do not rotate between network interfaces when |
| * 'ethrotate' variable is set to 'no'. |
| */ |
| ethrotate = getenv("ethrotate"); |
| if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) |
| return; |
| |
| if (!eth_get_dev()) |
| return; |
| |
| if (first_restart) |
| first_failed = eth_get_dev(); |
| |
| eth_set_current_to_next(); |
| |
| eth_current_changed(); |
| |
| if (first_failed == eth_get_dev()) |
| net_restart_wrap = 1; |
| } |
| |
| void eth_set_current(void) |
| { |
| static char *act; |
| static int env_changed_id; |
| int env_id; |
| |
| env_id = get_env_id(); |
| if ((act == NULL) || (env_changed_id != env_id)) { |
| act = getenv("ethact"); |
| env_changed_id = env_id; |
| } |
| |
| if (act == NULL) { |
| char *ethprime = getenv("ethprime"); |
| void *dev = NULL; |
| |
| if (ethprime) |
| dev = eth_get_dev_by_name(ethprime); |
| if (dev) |
| eth_set_dev(dev); |
| else |
| eth_set_dev(NULL); |
| } else { |
| eth_set_dev(eth_get_dev_by_name(act)); |
| } |
| |
| eth_current_changed(); |
| } |
| |
| const char *eth_get_name(void) |
| { |
| return eth_get_dev() ? eth_get_dev()->name : "unknown"; |
| } |