| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * EFI application network access support |
| * |
| * Copyright (c) 2016 Alexander Graf |
| */ |
| |
| #include <common.h> |
| #include <efi_loader.h> |
| #include <malloc.h> |
| |
| static const efi_guid_t efi_net_guid = EFI_SIMPLE_NETWORK_GUID; |
| static const efi_guid_t efi_pxe_guid = EFI_PXE_GUID; |
| static struct efi_pxe_packet *dhcp_ack; |
| static bool new_rx_packet; |
| static void *new_tx_packet; |
| static void *transmit_buffer; |
| |
| /* |
| * The notification function of this event is called in every timer cycle |
| * to check if a new network packet has been received. |
| */ |
| static struct efi_event *network_timer_event; |
| /* |
| * This event is signaled when a packet has been received. |
| */ |
| static struct efi_event *wait_for_packet; |
| |
| /** |
| * struct efi_net_obj - EFI object representing a network interface |
| * |
| * @header: EFI object header |
| * @net: simple network protocol interface |
| * @net_mode: status of the network interface |
| * @pxe: PXE base code protocol interface |
| * @pxe_mode: status of the PXE base code protocol |
| */ |
| struct efi_net_obj { |
| struct efi_object header; |
| struct efi_simple_network net; |
| struct efi_simple_network_mode net_mode; |
| struct efi_pxe pxe; |
| struct efi_pxe_mode pxe_mode; |
| }; |
| |
| /* |
| * efi_net_start() - start the network interface |
| * |
| * This function implements the Start service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_start(struct efi_simple_network *this) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p", this); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| if (this->mode->state != EFI_NETWORK_STOPPED) |
| ret = EFI_ALREADY_STARTED; |
| else |
| this->mode->state = EFI_NETWORK_STARTED; |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /* |
| * efi_net_stop() - stop the network interface |
| * |
| * This function implements the Stop service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_stop(struct efi_simple_network *this) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p", this); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| if (this->mode->state == EFI_NETWORK_STOPPED) |
| ret = EFI_NOT_STARTED; |
| else |
| this->mode->state = EFI_NETWORK_STOPPED; |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /* |
| * efi_net_initialize() - initialize the network interface |
| * |
| * This function implements the Initialize service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @extra_rx: extra receive buffer to be allocated |
| * @extra_tx: extra transmit buffer to be allocated |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_initialize(struct efi_simple_network *this, |
| ulong extra_rx, ulong extra_tx) |
| { |
| int ret; |
| efi_status_t r = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p, %lx, %lx", this, extra_rx, extra_tx); |
| |
| /* Check parameters */ |
| if (!this) { |
| r = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| /* Setup packet buffers */ |
| net_init(); |
| /* Disable hardware and put it into the reset state */ |
| eth_halt(); |
| /* Set current device according to environment variables */ |
| eth_set_current(); |
| /* Get hardware ready for send and receive operations */ |
| ret = eth_init(); |
| if (ret < 0) { |
| eth_halt(); |
| this->mode->state = EFI_NETWORK_STOPPED; |
| r = EFI_DEVICE_ERROR; |
| goto out; |
| } else { |
| this->mode->state = EFI_NETWORK_INITIALIZED; |
| } |
| out: |
| return EFI_EXIT(r); |
| } |
| |
| /* |
| * efi_net_reset() - reinitialize the network interface |
| * |
| * This function implements the Reset service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @extended_verification: execute exhaustive verification |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_reset(struct efi_simple_network *this, |
| int extended_verification) |
| { |
| EFI_ENTRY("%p, %x", this, extended_verification); |
| |
| return EFI_EXIT(EFI_CALL(efi_net_initialize(this, 0, 0))); |
| } |
| |
| /* |
| * efi_net_shutdown() - shut down the network interface |
| * |
| * This function implements the Shutdown service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_shutdown(struct efi_simple_network *this) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p", this); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| eth_halt(); |
| this->mode->state = EFI_NETWORK_STOPPED; |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /* |
| * efi_net_receive_filters() - mange multicast receive filters |
| * |
| * This function implements the ReceiveFilters service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @enable: bit mask of receive filters to enable |
| * @disable: bit mask of receive filters to disable |
| * @reset_mcast_filter: true resets contents of the filters |
| * @mcast_filter_count: number of hardware MAC addresses in the new filters list |
| * @mcast_filter: list of new filters |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_receive_filters |
| (struct efi_simple_network *this, u32 enable, u32 disable, |
| int reset_mcast_filter, ulong mcast_filter_count, |
| struct efi_mac_address *mcast_filter) |
| { |
| EFI_ENTRY("%p, %x, %x, %x, %lx, %p", this, enable, disable, |
| reset_mcast_filter, mcast_filter_count, mcast_filter); |
| |
| return EFI_EXIT(EFI_UNSUPPORTED); |
| } |
| |
| /* |
| * efi_net_station_address() - set the hardware MAC address |
| * |
| * This function implements the StationAddress service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @reset: if true reset the address to default |
| * @new_mac: new MAC address |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_station_address |
| (struct efi_simple_network *this, int reset, |
| struct efi_mac_address *new_mac) |
| { |
| EFI_ENTRY("%p, %x, %p", this, reset, new_mac); |
| |
| return EFI_EXIT(EFI_UNSUPPORTED); |
| } |
| |
| /* |
| * efi_net_statistics() - reset or collect statistics of the network interface |
| * |
| * This function implements the Statistics service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @reset: if true, the statistics are reset |
| * @stat_size: size of the statistics table |
| * @stat_table: table to receive the statistics |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_statistics(struct efi_simple_network *this, |
| int reset, ulong *stat_size, |
| void *stat_table) |
| { |
| EFI_ENTRY("%p, %x, %p, %p", this, reset, stat_size, stat_table); |
| |
| return EFI_EXIT(EFI_UNSUPPORTED); |
| } |
| |
| /* |
| * efi_net_mcastiptomac() - translate multicast IP address to MAC address |
| * |
| * This function implements the Statistics service of the |
| * EFI_SIMPLE_NETWORK_PROTOCOL. See the Unified Extensible Firmware Interface |
| * (UEFI) specification for details. |
| * |
| * @this: pointer to the protocol instance |
| * @ipv6: true if the IP address is an IPv6 address |
| * @ip: IP address |
| * @mac: MAC address |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_mcastiptomac(struct efi_simple_network *this, |
| int ipv6, |
| struct efi_ip_address *ip, |
| struct efi_mac_address *mac) |
| { |
| EFI_ENTRY("%p, %x, %p, %p", this, ipv6, ip, mac); |
| |
| return EFI_EXIT(EFI_INVALID_PARAMETER); |
| } |
| |
| /** |
| * efi_net_nvdata() - read or write NVRAM |
| * |
| * This function implements the GetStatus service of the Simple Network |
| * Protocol. See the UEFI spec for details. |
| * |
| * @this: the instance of the Simple Network Protocol |
| * @readwrite: true for read, false for write |
| * @offset: offset in NVRAM |
| * @buffer_size: size of buffer |
| * @buffer: buffer |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_nvdata(struct efi_simple_network *this, |
| int read_write, ulong offset, |
| ulong buffer_size, char *buffer) |
| { |
| EFI_ENTRY("%p, %x, %lx, %lx, %p", this, read_write, offset, buffer_size, |
| buffer); |
| |
| return EFI_EXIT(EFI_UNSUPPORTED); |
| } |
| |
| /** |
| * efi_net_get_status() - get interrupt status |
| * |
| * This function implements the GetStatus service of the Simple Network |
| * Protocol. See the UEFI spec for details. |
| * |
| * @this: the instance of the Simple Network Protocol |
| * @int_status: interface status |
| * @txbuf: transmission buffer |
| */ |
| static efi_status_t EFIAPI efi_net_get_status(struct efi_simple_network *this, |
| u32 *int_status, void **txbuf) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p, %p, %p", this, int_status, txbuf); |
| |
| efi_timer_check(); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| switch (this->mode->state) { |
| case EFI_NETWORK_STOPPED: |
| ret = EFI_NOT_STARTED; |
| goto out; |
| case EFI_NETWORK_STARTED: |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| default: |
| break; |
| } |
| |
| if (int_status) { |
| /* We send packets synchronously, so nothing is outstanding */ |
| *int_status = EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT; |
| if (new_rx_packet) |
| *int_status |= EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT; |
| } |
| if (txbuf) |
| *txbuf = new_tx_packet; |
| |
| new_tx_packet = NULL; |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_net_transmit() - transmit a packet |
| * |
| * This function implements the Transmit service of the Simple Network Protocol. |
| * See the UEFI spec for details. |
| * |
| * @this: the instance of the Simple Network Protocol |
| * @header_size: size of the media header |
| * @buffer_size: size of the buffer to receive the packet |
| * @buffer: buffer to receive the packet |
| * @src_addr: source hardware MAC address |
| * @dest_addr: destination hardware MAC address |
| * @protocol: type of header to build |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_transmit |
| (struct efi_simple_network *this, size_t header_size, |
| size_t buffer_size, void *buffer, |
| struct efi_mac_address *src_addr, |
| struct efi_mac_address *dest_addr, u16 *protocol) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| |
| EFI_ENTRY("%p, %lu, %lu, %p, %p, %p, %p", this, |
| (unsigned long)header_size, (unsigned long)buffer_size, |
| buffer, src_addr, dest_addr, protocol); |
| |
| efi_timer_check(); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| /* We do not support jumbo packets */ |
| if (buffer_size > PKTSIZE_ALIGN) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| if (header_size) { |
| /* |
| * TODO: We would need to create the header |
| * if header_size != 0 |
| */ |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| switch (this->mode->state) { |
| case EFI_NETWORK_STOPPED: |
| ret = EFI_NOT_STARTED; |
| goto out; |
| case EFI_NETWORK_STARTED: |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| default: |
| break; |
| } |
| |
| /* Ethernet packets always fit, just bounce */ |
| memcpy(transmit_buffer, buffer, buffer_size); |
| net_send_packet(transmit_buffer, buffer_size); |
| |
| new_tx_packet = buffer; |
| |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_net_receive() - receive a packet from a network interface |
| * |
| * This function implements the Receive service of the Simple Network Protocol. |
| * See the UEFI spec for details. |
| * |
| * @this: the instance of the Simple Network Protocol |
| * @header_size: size of the media header |
| * @buffer_size: size of the buffer to receive the packet |
| * @buffer: buffer to receive the packet |
| * @src_addr: source MAC address |
| * @dest_addr: destination MAC address |
| * @protocol: protocol |
| * Return: status code |
| */ |
| static efi_status_t EFIAPI efi_net_receive |
| (struct efi_simple_network *this, size_t *header_size, |
| size_t *buffer_size, void *buffer, |
| struct efi_mac_address *src_addr, |
| struct efi_mac_address *dest_addr, u16 *protocol) |
| { |
| efi_status_t ret = EFI_SUCCESS; |
| struct ethernet_hdr *eth_hdr; |
| size_t hdr_size = sizeof(struct ethernet_hdr); |
| u16 protlen; |
| |
| EFI_ENTRY("%p, %p, %p, %p, %p, %p, %p", this, header_size, |
| buffer_size, buffer, src_addr, dest_addr, protocol); |
| |
| /* Execute events */ |
| efi_timer_check(); |
| |
| /* Check parameters */ |
| if (!this) { |
| ret = EFI_INVALID_PARAMETER; |
| goto out; |
| } |
| |
| switch (this->mode->state) { |
| case EFI_NETWORK_STOPPED: |
| ret = EFI_NOT_STARTED; |
| goto out; |
| case EFI_NETWORK_STARTED: |
| ret = EFI_DEVICE_ERROR; |
| goto out; |
| default: |
| break; |
| } |
| |
| if (!new_rx_packet) { |
| ret = EFI_NOT_READY; |
| goto out; |
| } |
| /* Check that we at least received an Ethernet header */ |
| if (net_rx_packet_len < sizeof(struct ethernet_hdr)) { |
| new_rx_packet = false; |
| ret = EFI_NOT_READY; |
| goto out; |
| } |
| /* Fill export parameters */ |
| eth_hdr = (struct ethernet_hdr *)net_rx_packet; |
| protlen = ntohs(eth_hdr->et_protlen); |
| if (protlen == 0x8100) { |
| hdr_size += 4; |
| protlen = ntohs(*(u16 *)&net_rx_packet[hdr_size - 2]); |
| } |
| if (header_size) |
| *header_size = hdr_size; |
| if (dest_addr) |
| memcpy(dest_addr, eth_hdr->et_dest, ARP_HLEN); |
| if (src_addr) |
| memcpy(src_addr, eth_hdr->et_src, ARP_HLEN); |
| if (protocol) |
| *protocol = protlen; |
| if (*buffer_size < net_rx_packet_len) { |
| /* Packet doesn't fit, try again with bigger buffer */ |
| *buffer_size = net_rx_packet_len; |
| ret = EFI_BUFFER_TOO_SMALL; |
| goto out; |
| } |
| /* Copy packet */ |
| memcpy(buffer, net_rx_packet, net_rx_packet_len); |
| *buffer_size = net_rx_packet_len; |
| new_rx_packet = false; |
| out: |
| return EFI_EXIT(ret); |
| } |
| |
| /** |
| * efi_net_set_dhcp_ack() - take note of a selected DHCP IP address |
| * |
| * This function is called by dhcp_handler(). |
| */ |
| void efi_net_set_dhcp_ack(void *pkt, int len) |
| { |
| int maxsize = sizeof(*dhcp_ack); |
| |
| if (!dhcp_ack) |
| dhcp_ack = malloc(maxsize); |
| |
| memcpy(dhcp_ack, pkt, min(len, maxsize)); |
| } |
| |
| /** |
| * efi_net_push() - callback for received network packet |
| * |
| * This function is called when a network packet is received by eth_rx(). |
| * |
| * @pkt: network packet |
| * @len: length |
| */ |
| static void efi_net_push(void *pkt, int len) |
| { |
| new_rx_packet = true; |
| wait_for_packet->is_signaled = true; |
| } |
| |
| /** |
| * efi_network_timer_notify() - check if a new network packet has been received |
| * |
| * This notification function is called in every timer cycle. |
| * |
| * @event the event for which this notification function is registered |
| * @context event context - not used in this function |
| */ |
| static void EFIAPI efi_network_timer_notify(struct efi_event *event, |
| void *context) |
| { |
| struct efi_simple_network *this = (struct efi_simple_network *)context; |
| |
| EFI_ENTRY("%p, %p", event, context); |
| |
| /* |
| * Some network drivers do not support calling eth_rx() before |
| * initialization. |
| */ |
| if (!this || this->mode->state != EFI_NETWORK_INITIALIZED) |
| goto out; |
| |
| if (!new_rx_packet) { |
| push_packet = efi_net_push; |
| eth_rx(); |
| push_packet = NULL; |
| } |
| out: |
| EFI_EXIT(EFI_SUCCESS); |
| } |
| |
| /** |
| * efi_net_register() - register the simple network protocol |
| * |
| * This gets called from do_bootefi_exec(). |
| */ |
| efi_status_t efi_net_register(void) |
| { |
| struct efi_net_obj *netobj = NULL; |
| efi_status_t r; |
| |
| if (!eth_get_dev()) { |
| /* No network device active, don't expose any */ |
| return EFI_SUCCESS; |
| } |
| |
| /* We only expose the "active" network device, so one is enough */ |
| netobj = calloc(1, sizeof(*netobj)); |
| if (!netobj) |
| goto out_of_resources; |
| |
| /* Allocate an aligned transmit buffer */ |
| transmit_buffer = calloc(1, PKTSIZE_ALIGN + PKTALIGN); |
| if (!transmit_buffer) |
| goto out_of_resources; |
| transmit_buffer = (void *)ALIGN((uintptr_t)transmit_buffer, PKTALIGN); |
| |
| /* Hook net up to the device list */ |
| efi_add_handle(&netobj->header); |
| |
| /* Fill in object data */ |
| r = efi_add_protocol(&netobj->header, &efi_net_guid, |
| &netobj->net); |
| if (r != EFI_SUCCESS) |
| goto failure_to_add_protocol; |
| r = efi_add_protocol(&netobj->header, &efi_guid_device_path, |
| efi_dp_from_eth()); |
| if (r != EFI_SUCCESS) |
| goto failure_to_add_protocol; |
| r = efi_add_protocol(&netobj->header, &efi_pxe_guid, |
| &netobj->pxe); |
| if (r != EFI_SUCCESS) |
| goto failure_to_add_protocol; |
| netobj->net.revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION; |
| netobj->net.start = efi_net_start; |
| netobj->net.stop = efi_net_stop; |
| netobj->net.initialize = efi_net_initialize; |
| netobj->net.reset = efi_net_reset; |
| netobj->net.shutdown = efi_net_shutdown; |
| netobj->net.receive_filters = efi_net_receive_filters; |
| netobj->net.station_address = efi_net_station_address; |
| netobj->net.statistics = efi_net_statistics; |
| netobj->net.mcastiptomac = efi_net_mcastiptomac; |
| netobj->net.nvdata = efi_net_nvdata; |
| netobj->net.get_status = efi_net_get_status; |
| netobj->net.transmit = efi_net_transmit; |
| netobj->net.receive = efi_net_receive; |
| netobj->net.mode = &netobj->net_mode; |
| netobj->net_mode.state = EFI_NETWORK_STARTED; |
| memcpy(netobj->net_mode.current_address.mac_addr, eth_get_ethaddr(), 6); |
| netobj->net_mode.hwaddr_size = ARP_HLEN; |
| netobj->net_mode.max_packet_size = PKTSIZE; |
| netobj->net_mode.if_type = ARP_ETHER; |
| |
| netobj->pxe.mode = &netobj->pxe_mode; |
| if (dhcp_ack) |
| netobj->pxe_mode.dhcp_ack = *dhcp_ack; |
| |
| /* |
| * Create WaitForPacket event. |
| */ |
| r = efi_create_event(EVT_NOTIFY_WAIT, TPL_CALLBACK, |
| efi_network_timer_notify, NULL, NULL, |
| &wait_for_packet); |
| if (r != EFI_SUCCESS) { |
| printf("ERROR: Failed to register network event\n"); |
| return r; |
| } |
| netobj->net.wait_for_packet = wait_for_packet; |
| /* |
| * Create a timer event. |
| * |
| * The notification function is used to check if a new network packet |
| * has been received. |
| * |
| * iPXE is running at TPL_CALLBACK most of the time. Use a higher TPL. |
| */ |
| r = efi_create_event(EVT_TIMER | EVT_NOTIFY_SIGNAL, TPL_NOTIFY, |
| efi_network_timer_notify, &netobj->net, NULL, |
| &network_timer_event); |
| if (r != EFI_SUCCESS) { |
| printf("ERROR: Failed to register network event\n"); |
| return r; |
| } |
| /* Network is time critical, create event in every timer cycle */ |
| r = efi_set_timer(network_timer_event, EFI_TIMER_PERIODIC, 0); |
| if (r != EFI_SUCCESS) { |
| printf("ERROR: Failed to set network timer\n"); |
| return r; |
| } |
| |
| return EFI_SUCCESS; |
| failure_to_add_protocol: |
| printf("ERROR: Failure to add protocol\n"); |
| return r; |
| out_of_resources: |
| free(netobj); |
| /* free(transmit_buffer) not needed yet */ |
| printf("ERROR: Out of memory\n"); |
| return EFI_OUT_OF_RESOURCES; |
| } |