| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| * Author: Christophe Kerello <christophe.kerello@st.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/stpmu1.h> |
| |
| struct stpmu1_range { |
| int min_uv; |
| int min_sel; |
| int max_sel; |
| int step; |
| }; |
| |
| struct stpmu1_output_range { |
| const struct stpmu1_range *ranges; |
| int nbranges; |
| }; |
| |
| #define STPMU1_MODE(_id, _val, _name) { \ |
| .id = _id, \ |
| .register_value = _val, \ |
| .name = _name, \ |
| } |
| |
| #define STPMU1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \ |
| .min_uv = _min_uv, \ |
| .min_sel = _min_sel, \ |
| .max_sel = _max_sel, \ |
| .step = _step, \ |
| } |
| |
| #define STPMU1_OUTPUT_RANGE(_ranges, _nbranges) { \ |
| .ranges = _ranges, \ |
| .nbranges = _nbranges, \ |
| } |
| |
| static int stpmu1_output_find_uv(int sel, |
| const struct stpmu1_output_range *output_range) |
| { |
| const struct stpmu1_range *range; |
| int i; |
| |
| for (i = 0, range = output_range->ranges; |
| i < output_range->nbranges; i++, range++) { |
| if (sel >= range->min_sel && sel <= range->max_sel) |
| return range->min_uv + |
| (sel - range->min_sel) * range->step; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int stpmu1_output_find_sel(int uv, |
| const struct stpmu1_output_range *output_range) |
| { |
| const struct stpmu1_range *range; |
| int i; |
| |
| for (i = 0, range = output_range->ranges; |
| i < output_range->nbranges; i++, range++) { |
| if (uv == range->min_uv && !range->step) |
| return range->min_sel; |
| |
| if (uv >= range->min_uv && |
| uv <= range->min_uv + |
| (range->max_sel - range->min_sel) * range->step) |
| return range->min_sel + |
| (uv - range->min_uv) / range->step; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * BUCK regulators |
| */ |
| |
| static const struct stpmu1_range buck1_ranges[] = { |
| STPMU1_RANGE(600000, 0, 30, 25000), |
| STPMU1_RANGE(1350000, 31, 63, 0), |
| }; |
| |
| static const struct stpmu1_range buck2_ranges[] = { |
| STPMU1_RANGE(1000000, 0, 17, 0), |
| STPMU1_RANGE(1050000, 18, 19, 0), |
| STPMU1_RANGE(1100000, 20, 21, 0), |
| STPMU1_RANGE(1150000, 22, 23, 0), |
| STPMU1_RANGE(1200000, 24, 25, 0), |
| STPMU1_RANGE(1250000, 26, 27, 0), |
| STPMU1_RANGE(1300000, 28, 29, 0), |
| STPMU1_RANGE(1350000, 30, 31, 0), |
| STPMU1_RANGE(1400000, 32, 33, 0), |
| STPMU1_RANGE(1450000, 34, 35, 0), |
| STPMU1_RANGE(1500000, 36, 63, 0), |
| }; |
| |
| static const struct stpmu1_range buck3_ranges[] = { |
| STPMU1_RANGE(1000000, 0, 19, 0), |
| STPMU1_RANGE(1100000, 20, 23, 0), |
| STPMU1_RANGE(1200000, 24, 27, 0), |
| STPMU1_RANGE(1300000, 28, 31, 0), |
| STPMU1_RANGE(1400000, 32, 35, 0), |
| STPMU1_RANGE(1500000, 36, 55, 100000), |
| STPMU1_RANGE(3400000, 56, 63, 0), |
| }; |
| |
| static const struct stpmu1_range buck4_ranges[] = { |
| STPMU1_RANGE(600000, 0, 27, 25000), |
| STPMU1_RANGE(1300000, 28, 29, 0), |
| STPMU1_RANGE(1350000, 30, 31, 0), |
| STPMU1_RANGE(1400000, 32, 33, 0), |
| STPMU1_RANGE(1450000, 34, 35, 0), |
| STPMU1_RANGE(1500000, 36, 60, 100000), |
| STPMU1_RANGE(3900000, 61, 63, 0), |
| }; |
| |
| /* BUCK: 1,2,3,4 - voltage ranges */ |
| static const struct stpmu1_output_range buck_voltage_range[] = { |
| STPMU1_OUTPUT_RANGE(buck1_ranges, ARRAY_SIZE(buck1_ranges)), |
| STPMU1_OUTPUT_RANGE(buck2_ranges, ARRAY_SIZE(buck2_ranges)), |
| STPMU1_OUTPUT_RANGE(buck3_ranges, ARRAY_SIZE(buck3_ranges)), |
| STPMU1_OUTPUT_RANGE(buck4_ranges, ARRAY_SIZE(buck4_ranges)), |
| }; |
| |
| /* BUCK modes */ |
| static const struct dm_regulator_mode buck_modes[] = { |
| STPMU1_MODE(STPMU1_BUCK_MODE_HP, STPMU1_BUCK_MODE_HP, "HP"), |
| STPMU1_MODE(STPMU1_BUCK_MODE_LP, STPMU1_BUCK_MODE_LP, "LP"), |
| }; |
| |
| static int stpmu1_buck_get_uv(struct udevice *dev, int buck) |
| { |
| int sel; |
| |
| sel = pmic_reg_read(dev, STPMU1_BUCKX_CTRL_REG(buck)); |
| if (sel < 0) |
| return sel; |
| |
| sel &= STPMU1_BUCK_OUTPUT_MASK; |
| sel >>= STPMU1_BUCK_OUTPUT_SHIFT; |
| |
| return stpmu1_output_find_uv(sel, &buck_voltage_range[buck]); |
| } |
| |
| static int stpmu1_buck_get_value(struct udevice *dev) |
| { |
| return stpmu1_buck_get_uv(dev->parent, dev->driver_data - 1); |
| } |
| |
| static int stpmu1_buck_set_value(struct udevice *dev, int uv) |
| { |
| int sel, buck = dev->driver_data - 1; |
| |
| sel = stpmu1_output_find_sel(uv, &buck_voltage_range[buck]); |
| if (sel < 0) |
| return sel; |
| |
| return pmic_clrsetbits(dev->parent, |
| STPMU1_BUCKX_CTRL_REG(buck), |
| STPMU1_BUCK_OUTPUT_MASK, |
| sel << STPMU1_BUCK_OUTPUT_SHIFT); |
| } |
| |
| static int stpmu1_buck_get_enable(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, |
| STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1)); |
| if (ret < 0) |
| return false; |
| |
| return ret & STPMU1_BUCK_EN ? true : false; |
| } |
| |
| static int stpmu1_buck_set_enable(struct udevice *dev, bool enable) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS : |
| STPMU1_DEFAULT_STOP_DELAY_MS; |
| int ret, uv; |
| |
| /* if regulator is already in the wanted state, nothing to do */ |
| if (stpmu1_buck_get_enable(dev) == enable) |
| return 0; |
| |
| if (enable) { |
| uc_pdata = dev_get_uclass_platdata(dev); |
| uv = stpmu1_buck_get_value(dev); |
| if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV)) |
| stpmu1_buck_set_value(dev, uc_pdata->min_uV); |
| } |
| |
| ret = pmic_clrsetbits(dev->parent, |
| STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1), |
| STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0); |
| mdelay(delay); |
| |
| return ret; |
| } |
| |
| static int stpmu1_buck_get_mode(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, |
| STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1)); |
| if (ret < 0) |
| return ret; |
| |
| return ret & STPMU1_BUCK_MODE ? STPMU1_BUCK_MODE_LP : |
| STPMU1_BUCK_MODE_HP; |
| } |
| |
| static int stpmu1_buck_set_mode(struct udevice *dev, int mode) |
| { |
| return pmic_clrsetbits(dev->parent, |
| STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1), |
| STPMU1_BUCK_MODE, |
| mode ? STPMU1_BUCK_MODE : 0); |
| } |
| |
| static int stpmu1_buck_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| if (!dev->driver_data || dev->driver_data > STPMU1_MAX_BUCK) |
| return -EINVAL; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_BUCK; |
| uc_pdata->mode = (struct dm_regulator_mode *)buck_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(buck_modes); |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops stpmu1_buck_ops = { |
| .get_value = stpmu1_buck_get_value, |
| .set_value = stpmu1_buck_set_value, |
| .get_enable = stpmu1_buck_get_enable, |
| .set_enable = stpmu1_buck_set_enable, |
| .get_mode = stpmu1_buck_get_mode, |
| .set_mode = stpmu1_buck_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(stpmu1_buck) = { |
| .name = "stpmu1_buck", |
| .id = UCLASS_REGULATOR, |
| .ops = &stpmu1_buck_ops, |
| .probe = stpmu1_buck_probe, |
| }; |
| |
| /* |
| * LDO regulators |
| */ |
| |
| static const struct stpmu1_range ldo12_ranges[] = { |
| STPMU1_RANGE(1700000, 0, 7, 0), |
| STPMU1_RANGE(1700000, 8, 24, 100000), |
| STPMU1_RANGE(3300000, 25, 31, 0), |
| }; |
| |
| static const struct stpmu1_range ldo3_ranges[] = { |
| STPMU1_RANGE(1700000, 0, 7, 0), |
| STPMU1_RANGE(1700000, 8, 24, 100000), |
| STPMU1_RANGE(3300000, 25, 30, 0), |
| /* Sel 31 is special case when LDO3 is in mode sync_source (BUCK2/2) */ |
| }; |
| |
| static const struct stpmu1_range ldo5_ranges[] = { |
| STPMU1_RANGE(1700000, 0, 7, 0), |
| STPMU1_RANGE(1700000, 8, 30, 100000), |
| STPMU1_RANGE(3900000, 31, 31, 0), |
| }; |
| |
| static const struct stpmu1_range ldo6_ranges[] = { |
| STPMU1_RANGE(900000, 0, 24, 100000), |
| STPMU1_RANGE(3300000, 25, 31, 0), |
| }; |
| |
| /* LDO: 1,2,3,4,5,6 - voltage ranges */ |
| static const struct stpmu1_output_range ldo_voltage_range[] = { |
| STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)), |
| STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)), |
| STPMU1_OUTPUT_RANGE(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)), |
| STPMU1_OUTPUT_RANGE(NULL, 0), |
| STPMU1_OUTPUT_RANGE(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)), |
| STPMU1_OUTPUT_RANGE(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)), |
| }; |
| |
| /* LDO modes */ |
| static const struct dm_regulator_mode ldo_modes[] = { |
| STPMU1_MODE(STPMU1_LDO_MODE_NORMAL, |
| STPMU1_LDO_MODE_NORMAL, "NORMAL"), |
| STPMU1_MODE(STPMU1_LDO_MODE_BYPASS, |
| STPMU1_LDO_MODE_BYPASS, "BYPASS"), |
| STPMU1_MODE(STPMU1_LDO_MODE_SINK_SOURCE, |
| STPMU1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"), |
| }; |
| |
| static int stpmu1_ldo_get_value(struct udevice *dev) |
| { |
| int sel, ldo = dev->driver_data - 1; |
| |
| sel = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo)); |
| if (sel < 0) |
| return sel; |
| |
| /* ldo4 => 3,3V */ |
| if (ldo == STPMU1_LDO4) |
| return STPMU1_LDO4_UV; |
| |
| sel &= STPMU1_LDO12356_OUTPUT_MASK; |
| sel >>= STPMU1_LDO12356_OUTPUT_SHIFT; |
| |
| /* ldo3, sel = 31 => BUCK2/2 */ |
| if (ldo == STPMU1_LDO3 && sel == STPMU1_LDO3_DDR_SEL) |
| return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2; |
| |
| return stpmu1_output_find_uv(sel, &ldo_voltage_range[ldo]); |
| } |
| |
| static int stpmu1_ldo_set_value(struct udevice *dev, int uv) |
| { |
| int sel, ldo = dev->driver_data - 1; |
| |
| /* ldo4 => not possible */ |
| if (ldo == STPMU1_LDO4) |
| return -EINVAL; |
| |
| sel = stpmu1_output_find_sel(uv, &ldo_voltage_range[ldo]); |
| if (sel < 0) |
| return sel; |
| |
| return pmic_clrsetbits(dev->parent, |
| STPMU1_LDOX_CTRL_REG(ldo), |
| STPMU1_LDO12356_OUTPUT_MASK, |
| sel << STPMU1_LDO12356_OUTPUT_SHIFT); |
| } |
| |
| static int stpmu1_ldo_get_enable(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, |
| STPMU1_LDOX_CTRL_REG(dev->driver_data - 1)); |
| if (ret < 0) |
| return false; |
| |
| return ret & STPMU1_LDO_EN ? true : false; |
| } |
| |
| static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS : |
| STPMU1_DEFAULT_STOP_DELAY_MS; |
| int ret, uv; |
| |
| /* if regulator is already in the wanted state, nothing to do */ |
| if (stpmu1_ldo_get_enable(dev) == enable) |
| return 0; |
| |
| if (enable) { |
| uc_pdata = dev_get_uclass_platdata(dev); |
| uv = stpmu1_ldo_get_value(dev); |
| if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV)) |
| stpmu1_ldo_set_value(dev, uc_pdata->min_uV); |
| } |
| |
| ret = pmic_clrsetbits(dev->parent, |
| STPMU1_LDOX_CTRL_REG(dev->driver_data - 1), |
| STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0); |
| mdelay(delay); |
| |
| return ret; |
| } |
| |
| static int stpmu1_ldo_get_mode(struct udevice *dev) |
| { |
| int ret, ldo = dev->driver_data - 1; |
| |
| if (ldo != STPMU1_LDO3) |
| return -EINVAL; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo)); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & STPMU1_LDO3_MODE) |
| return STPMU1_LDO_MODE_BYPASS; |
| |
| ret &= STPMU1_LDO12356_OUTPUT_MASK; |
| ret >>= STPMU1_LDO12356_OUTPUT_SHIFT; |
| |
| return ret == STPMU1_LDO3_DDR_SEL ? STPMU1_LDO_MODE_SINK_SOURCE : |
| STPMU1_LDO_MODE_NORMAL; |
| } |
| |
| static int stpmu1_ldo_set_mode(struct udevice *dev, int mode) |
| { |
| int ret, ldo = dev->driver_data - 1; |
| |
| if (ldo != STPMU1_LDO3) |
| return -EINVAL; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo)); |
| if (ret < 0) |
| return ret; |
| |
| switch (mode) { |
| case STPMU1_LDO_MODE_SINK_SOURCE: |
| ret &= ~STPMU1_LDO12356_OUTPUT_MASK; |
| ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT; |
| case STPMU1_LDO_MODE_NORMAL: |
| ret &= ~STPMU1_LDO3_MODE; |
| break; |
| case STPMU1_LDO_MODE_BYPASS: |
| ret |= STPMU1_LDO3_MODE; |
| break; |
| } |
| |
| return pmic_reg_write(dev->parent, STPMU1_LDOX_CTRL_REG(ldo), ret); |
| } |
| |
| static int stpmu1_ldo_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| if (!dev->driver_data || dev->driver_data > STPMU1_MAX_LDO) |
| return -EINVAL; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_LDO; |
| if (dev->driver_data - 1 == STPMU1_LDO3) { |
| uc_pdata->mode = (struct dm_regulator_mode *)ldo_modes; |
| uc_pdata->mode_count = ARRAY_SIZE(ldo_modes); |
| } else { |
| uc_pdata->mode_count = 0; |
| } |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops stpmu1_ldo_ops = { |
| .get_value = stpmu1_ldo_get_value, |
| .set_value = stpmu1_ldo_set_value, |
| .get_enable = stpmu1_ldo_get_enable, |
| .set_enable = stpmu1_ldo_set_enable, |
| .get_mode = stpmu1_ldo_get_mode, |
| .set_mode = stpmu1_ldo_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(stpmu1_ldo) = { |
| .name = "stpmu1_ldo", |
| .id = UCLASS_REGULATOR, |
| .ops = &stpmu1_ldo_ops, |
| .probe = stpmu1_ldo_probe, |
| }; |
| |
| /* |
| * VREF DDR regulator |
| */ |
| |
| static int stpmu1_vref_ddr_get_value(struct udevice *dev) |
| { |
| /* BUCK2/2 */ |
| return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2; |
| } |
| |
| static int stpmu1_vref_ddr_get_enable(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_VREF_CTRL_REG); |
| if (ret < 0) |
| return false; |
| |
| return ret & STPMU1_VREF_EN ? true : false; |
| } |
| |
| static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable) |
| { |
| int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS : |
| STPMU1_DEFAULT_STOP_DELAY_MS; |
| int ret; |
| |
| /* if regulator is already in the wanted state, nothing to do */ |
| if (stpmu1_vref_ddr_get_enable(dev) == enable) |
| return 0; |
| |
| ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG, |
| STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0); |
| mdelay(delay); |
| |
| return ret; |
| } |
| |
| static int stpmu1_vref_ddr_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_FIXED; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops stpmu1_vref_ddr_ops = { |
| .get_value = stpmu1_vref_ddr_get_value, |
| .get_enable = stpmu1_vref_ddr_get_enable, |
| .set_enable = stpmu1_vref_ddr_set_enable, |
| }; |
| |
| U_BOOT_DRIVER(stpmu1_vref_ddr) = { |
| .name = "stpmu1_vref_ddr", |
| .id = UCLASS_REGULATOR, |
| .ops = &stpmu1_vref_ddr_ops, |
| .probe = stpmu1_vref_ddr_probe, |
| }; |
| |
| /* |
| * BOOST regulator |
| */ |
| |
| static int stpmu1_boost_get_enable(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG); |
| if (ret < 0) |
| return false; |
| |
| return ret & STPMU1_USB_BOOST_EN ? true : false; |
| } |
| |
| static int stpmu1_boost_set_enable(struct udevice *dev, bool enable) |
| { |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG); |
| if (ret < 0) |
| return ret; |
| |
| if (!enable && ret & STPMU1_USB_PWR_SW_EN) |
| return -EINVAL; |
| |
| /* if regulator is already in the wanted state, nothing to do */ |
| if (!!(ret & STPMU1_USB_BOOST_EN) == enable) |
| return 0; |
| |
| ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG, |
| STPMU1_USB_BOOST_EN, |
| enable ? STPMU1_USB_BOOST_EN : 0); |
| if (enable) |
| mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS); |
| |
| return ret; |
| } |
| |
| static int stpmu1_boost_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_FIXED; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops stpmu1_boost_ops = { |
| .get_enable = stpmu1_boost_get_enable, |
| .set_enable = stpmu1_boost_set_enable, |
| }; |
| |
| U_BOOT_DRIVER(stpmu1_boost) = { |
| .name = "stpmu1_boost", |
| .id = UCLASS_REGULATOR, |
| .ops = &stpmu1_boost_ops, |
| .probe = stpmu1_boost_probe, |
| }; |
| |
| /* |
| * USB power switch |
| */ |
| |
| static int stpmu1_pwr_sw_get_enable(struct udevice *dev) |
| { |
| uint mask = 1 << dev->driver_data; |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG); |
| if (ret < 0) |
| return false; |
| |
| return ret & mask ? true : false; |
| } |
| |
| static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable) |
| { |
| uint mask = 1 << dev->driver_data; |
| int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS : |
| STPMU1_DEFAULT_STOP_DELAY_MS; |
| int ret; |
| |
| ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG); |
| if (ret < 0) |
| return ret; |
| |
| /* if regulator is already in the wanted state, nothing to do */ |
| if (!!(ret & mask) == enable) |
| return 0; |
| |
| /* Boost management */ |
| if (enable && !(ret & STPMU1_USB_BOOST_EN)) { |
| pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG, |
| STPMU1_USB_BOOST_EN, STPMU1_USB_BOOST_EN); |
| mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS); |
| } else if (!enable && ret & STPMU1_USB_BOOST_EN && |
| (ret & STPMU1_USB_PWR_SW_EN) != STPMU1_USB_PWR_SW_EN) { |
| pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG, |
| STPMU1_USB_BOOST_EN, 0); |
| } |
| |
| ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG, |
| mask, enable ? mask : 0); |
| mdelay(delay); |
| |
| return ret; |
| } |
| |
| static int stpmu1_pwr_sw_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| if (!dev->driver_data || dev->driver_data > STPMU1_MAX_PWR_SW) |
| return -EINVAL; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_FIXED; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops stpmu1_pwr_sw_ops = { |
| .get_enable = stpmu1_pwr_sw_get_enable, |
| .set_enable = stpmu1_pwr_sw_set_enable, |
| }; |
| |
| U_BOOT_DRIVER(stpmu1_pwr_sw) = { |
| .name = "stpmu1_pwr_sw", |
| .id = UCLASS_REGULATOR, |
| .ops = &stpmu1_pwr_sw_ops, |
| .probe = stpmu1_pwr_sw_probe, |
| }; |