| menu "Fastboot support" |
| |
| config FASTBOOT |
| bool |
| imply ANDROID_BOOT_IMAGE |
| imply CMD_FASTBOOT |
| |
| config USB_FUNCTION_FASTBOOT |
| bool "Enable USB fastboot gadget" |
| depends on USB_GADGET |
| default y if ARCH_SUNXI && USB_MUSB_GADGET |
| select FASTBOOT |
| select USB_GADGET_DOWNLOAD |
| help |
| This enables the USB part of the fastboot gadget. |
| |
| config UDP_FUNCTION_FASTBOOT |
| depends on NET |
| select FASTBOOT |
| bool "Enable fastboot protocol over UDP" |
| help |
| This enables the fastboot protocol over UDP. |
| |
| if FASTBOOT |
| |
| config FASTBOOT_BUF_ADDR |
| hex "Define FASTBOOT buffer address" |
| default 0x82000000 if MX6SX || MX6SL || MX6UL || MX6SLL |
| default 0x81000000 if ARCH_OMAP2PLUS |
| default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I |
| default 0x22000000 if ARCH_SUNXI && MACH_SUN9I |
| default 0x60800800 if ROCKCHIP_RK3036 || ROCKCHIP_RK3188 || \ |
| ROCKCHIP_RK322X |
| default 0x800800 if ROCKCHIP_RK3288 || ROCKCHIP_RK3329 || \ |
| ROCKCHIP_RK3399 |
| default 0x280000 if ROCKCHIP_RK3368 |
| default 0x100000 if ARCH_ZYNQMP |
| default 0 if SANDBOX |
| help |
| The fastboot protocol requires a large memory buffer for |
| downloads. Define this to the starting RAM address to use for |
| downloaded images. |
| |
| config FASTBOOT_BUF_SIZE |
| hex "Define FASTBOOT buffer size" |
| default 0x8000000 if ARCH_ROCKCHIP |
| default 0x6000000 if ARCH_ZYNQMP |
| default 0x2000000 if ARCH_SUNXI |
| default 0x8192 if SANDBOX |
| default 0x7000000 |
| help |
| The fastboot protocol requires a large memory buffer for |
| downloads. This buffer should be as large as possible for a |
| platform. Define this to the size available RAM for fastboot. |
| |
| config FASTBOOT_USB_DEV |
| int "USB controller number" |
| depends on USB_FUNCTION_FASTBOOT |
| default 0 |
| help |
| Some boards have USB OTG controller other than 0. Define this |
| option so it can be used in compiled environment (e.g. in |
| CONFIG_BOOTCOMMAND). |
| |
| config FASTBOOT_FLASH |
| bool "Enable FASTBOOT FLASH command" |
| default y if ARCH_SUNXI |
| depends on MMC || (NAND && CMD_MTDPARTS) |
| select IMAGE_SPARSE |
| help |
| The fastboot protocol includes a "flash" command for writing |
| the downloaded image to a non-volatile storage device. Define |
| this to enable the "fastboot flash" command. |
| |
| config FASTBOOT_UUU_SUPPORT |
| bool "Enable FASTBOOT i.MX UUU special command" |
| default y if ARCH_MX7 || ARCH_MX6 || ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7ULP |
| select FSL_FASTBOOT |
| help |
| The fastboot protocol includes "UCmd" command and "ACmd" command |
| |
| config FSL_FASTBOOT |
| bool "Enable FSL fastboot support" |
| depends on FASTBOOT_FLASH |
| help |
| This enables FSL implementation for Android fastboot. |
| |
| config ANDROID_RECOVERY |
| bool "Enable the recovery boot function" |
| depends on FSL_FASTBOOT |
| help |
| This enables the Android Recovery boot function. |
| |
| config CMD_BOOTA |
| bool "Enable the boota command" |
| depends on FSL_FASTBOOT |
| help |
| This enables the boota command for booting android images. |
| |
| config BCB_SUPPORT |
| bool "Enable the boot control block support" |
| depends on FSL_FASTBOOT |
| help |
| This enables the boot control block support for android reboot command |
| |
| config FASTBOOT_LOCK |
| bool "Enable the lock and unlock feature to the partitions" |
| depends on FSL_FASTBOOT |
| help |
| This enables the lock support for android flashing command |
| |
| config FASTBOOT_USB_DEV |
| int "USB controller number" |
| default 0 |
| help |
| Some boards have USB OTG controller other than 0. Define this |
| option so it can be used in compiled environment (e.g. in |
| CONFIG_BOOTCOMMAND). |
| |
| choice |
| prompt "Flash provider for FASTBOOT" |
| depends on FASTBOOT_FLASH && !FSL_FASTBOOT |
| |
| config FASTBOOT_FLASH_MMC |
| bool "FASTBOOT on MMC" |
| depends on MMC |
| |
| config FASTBOOT_FLASH_NAND |
| bool "FASTBOOT on NAND" |
| depends on NAND && CMD_MTDPARTS |
| |
| endchoice |
| |
| config FASTBOOT_FLASH_MMC_DEV |
| int "Define FASTBOOT MMC FLASH default device" |
| depends on FASTBOOT_FLASH_MMC |
| default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 |
| default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 |
| help |
| The fastboot "flash" command requires additional information |
| regarding the non-volatile storage device. Define this to |
| the eMMC device that fastboot should use to store the image. |
| |
| config FASTBOOT_FLASH_NAND_TRIMFFS |
| bool "Skip empty pages when flashing NAND" |
| depends on FASTBOOT_FLASH_NAND |
| help |
| When flashing NAND enable the DROP_FFS flag to drop trailing all-0xff |
| pages. |
| |
| config FASTBOOT_GPT_NAME |
| string "Target name for updating GPT" |
| depends on FASTBOOT_FLASH_MMC && EFI_PARTITION |
| default "gpt" |
| help |
| The fastboot "flash" command supports writing the downloaded |
| image to the Protective MBR and the Primary GUID Partition |
| Table. (Additionally, this downloaded image is post-processed |
| to generate and write the Backup GUID Partition Table.) |
| This occurs when the specified "partition name" on the |
| "fastboot flash" command line matches the value defined here. |
| The default target name for updating GPT is "gpt". |
| |
| config FASTBOOT_MBR_NAME |
| string "Target name for updating MBR" |
| depends on FASTBOOT_FLASH_MMC && DOS_PARTITION |
| default "mbr" |
| help |
| The fastboot "flash" command allows to write the downloaded image |
| to the Master Boot Record. This occurs when the "partition name" |
| specified on the "fastboot flash" command line matches the value |
| defined here. The default target name for updating MBR is "mbr". |
| |
| config FASTBOOT_CMD_OEM_FORMAT |
| bool "Enable the 'oem format' command" |
| depends on FASTBOOT_FLASH_MMC && CMD_GPT |
| help |
| Add support for the "oem format" command from a client. This |
| relies on the env variable partitions to contain the list of |
| partitions as required by the gpt command. |
| |
| endif # FASTBOOT |
| |
| endmenu |
