| /* | 
 |  *	Copied from Linux Monitor (LiMon) - Networking. | 
 |  * | 
 |  *	Copyright 1994 - 2000 Neil Russell. | 
 |  *	(See License) | 
 |  *	Copyright 2000 Roland Borde | 
 |  *	Copyright 2000 Paolo Scaffardi | 
 |  *	Copyright 2000-2002 Wolfgang Denk, wd@denx.de | 
 |  *	SPDX-License-Identifier:	GPL-2.0 | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 |  | 
 | #include "arp.h" | 
 |  | 
 | #ifndef	CONFIG_ARP_TIMEOUT | 
 | /* Milliseconds before trying ARP again */ | 
 | # define ARP_TIMEOUT		5000UL | 
 | #else | 
 | # define ARP_TIMEOUT		CONFIG_ARP_TIMEOUT | 
 | #endif | 
 |  | 
 |  | 
 | #ifndef	CONFIG_NET_RETRY_COUNT | 
 | # define ARP_TIMEOUT_COUNT	5	/* # of timeouts before giving up  */ | 
 | #else | 
 | # define ARP_TIMEOUT_COUNT	CONFIG_NET_RETRY_COUNT | 
 | #endif | 
 |  | 
 | struct in_addr net_arp_wait_packet_ip; | 
 | static struct in_addr net_arp_wait_reply_ip; | 
 | /* MAC address of waiting packet's destination */ | 
 | uchar	       *arp_wait_packet_ethaddr; | 
 | int		arp_wait_tx_packet_size; | 
 | ulong		arp_wait_timer_start; | 
 | int		arp_wait_try; | 
 |  | 
 | static uchar   *arp_tx_packet;	/* THE ARP transmit packet */ | 
 | static uchar	arp_tx_packet_buf[PKTSIZE_ALIGN + PKTALIGN]; | 
 |  | 
 | void arp_init(void) | 
 | { | 
 | 	/* XXX problem with bss workaround */ | 
 | 	arp_wait_packet_ethaddr = NULL; | 
 | 	net_arp_wait_packet_ip.s_addr = 0; | 
 | 	net_arp_wait_reply_ip.s_addr = 0; | 
 | 	arp_wait_tx_packet_size = 0; | 
 | 	arp_tx_packet = &arp_tx_packet_buf[0] + (PKTALIGN - 1); | 
 | 	arp_tx_packet -= (ulong)arp_tx_packet % PKTALIGN; | 
 | } | 
 |  | 
 | void arp_raw_request(struct in_addr source_ip, const uchar *target_ethaddr, | 
 | 	struct in_addr target_ip) | 
 | { | 
 | 	uchar *pkt; | 
 | 	struct arp_hdr *arp; | 
 | 	int eth_hdr_size; | 
 |  | 
 | 	debug_cond(DEBUG_DEV_PKT, "ARP broadcast %d\n", arp_wait_try); | 
 |  | 
 | 	pkt = arp_tx_packet; | 
 |  | 
 | 	eth_hdr_size = net_set_ether(pkt, net_bcast_ethaddr, PROT_ARP); | 
 | 	pkt += eth_hdr_size; | 
 |  | 
 | 	arp = (struct arp_hdr *)pkt; | 
 |  | 
 | 	arp->ar_hrd = htons(ARP_ETHER); | 
 | 	arp->ar_pro = htons(PROT_IP); | 
 | 	arp->ar_hln = ARP_HLEN; | 
 | 	arp->ar_pln = ARP_PLEN; | 
 | 	arp->ar_op = htons(ARPOP_REQUEST); | 
 |  | 
 | 	memcpy(&arp->ar_sha, net_ethaddr, ARP_HLEN);	/* source ET addr */ | 
 | 	net_write_ip(&arp->ar_spa, source_ip);		/* source IP addr */ | 
 | 	memcpy(&arp->ar_tha, target_ethaddr, ARP_HLEN);	/* target ET addr */ | 
 | 	net_write_ip(&arp->ar_tpa, target_ip);		/* target IP addr */ | 
 |  | 
 | 	net_send_packet(arp_tx_packet, eth_hdr_size + ARP_HDR_SIZE); | 
 | } | 
 |  | 
 | void arp_request(void) | 
 | { | 
 | 	if ((net_arp_wait_packet_ip.s_addr & net_netmask.s_addr) != | 
 | 	    (net_ip.s_addr & net_netmask.s_addr)) { | 
 | 		if (net_gateway.s_addr == 0) { | 
 | 			puts("## Warning: gatewayip needed but not set\n"); | 
 | 			net_arp_wait_reply_ip = net_arp_wait_packet_ip; | 
 | 		} else { | 
 | 			net_arp_wait_reply_ip = net_gateway; | 
 | 		} | 
 | 	} else { | 
 | 		net_arp_wait_reply_ip = net_arp_wait_packet_ip; | 
 | 	} | 
 |  | 
 | 	arp_raw_request(net_ip, net_null_ethaddr, net_arp_wait_reply_ip); | 
 | } | 
 |  | 
 | int arp_timeout_check(void) | 
 | { | 
 | 	ulong t; | 
 |  | 
 | 	if (!net_arp_wait_packet_ip.s_addr) | 
 | 		return 0; | 
 |  | 
 | 	t = get_timer(0); | 
 |  | 
 | 	/* check for arp timeout */ | 
 | 	if ((t - arp_wait_timer_start) > ARP_TIMEOUT) { | 
 | 		arp_wait_try++; | 
 |  | 
 | 		if (arp_wait_try >= ARP_TIMEOUT_COUNT) { | 
 | 			puts("\nARP Retry count exceeded; starting again\n"); | 
 | 			arp_wait_try = 0; | 
 | 			net_set_state(NETLOOP_FAIL); | 
 | 		} else { | 
 | 			arp_wait_timer_start = t; | 
 | 			arp_request(); | 
 | 		} | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | void arp_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len) | 
 | { | 
 | 	struct arp_hdr *arp; | 
 | 	struct in_addr reply_ip_addr; | 
 | 	uchar *pkt; | 
 | 	int eth_hdr_size; | 
 |  | 
 | 	/* | 
 | 	 * We have to deal with two types of ARP packets: | 
 | 	 * - REQUEST packets will be answered by sending  our | 
 | 	 *   IP address - if we know it. | 
 | 	 * - REPLY packates are expected only after we asked | 
 | 	 *   for the TFTP server's or the gateway's ethernet | 
 | 	 *   address; so if we receive such a packet, we set | 
 | 	 *   the server ethernet address | 
 | 	 */ | 
 | 	debug_cond(DEBUG_NET_PKT, "Got ARP\n"); | 
 |  | 
 | 	arp = (struct arp_hdr *)ip; | 
 | 	if (len < ARP_HDR_SIZE) { | 
 | 		printf("bad length %d < %d\n", len, ARP_HDR_SIZE); | 
 | 		return; | 
 | 	} | 
 | 	if (ntohs(arp->ar_hrd) != ARP_ETHER) | 
 | 		return; | 
 | 	if (ntohs(arp->ar_pro) != PROT_IP) | 
 | 		return; | 
 | 	if (arp->ar_hln != ARP_HLEN) | 
 | 		return; | 
 | 	if (arp->ar_pln != ARP_PLEN) | 
 | 		return; | 
 |  | 
 | 	if (net_ip.s_addr == 0) | 
 | 		return; | 
 |  | 
 | 	if (net_read_ip(&arp->ar_tpa).s_addr != net_ip.s_addr) | 
 | 		return; | 
 |  | 
 | 	switch (ntohs(arp->ar_op)) { | 
 | 	case ARPOP_REQUEST: | 
 | 		/* reply with our IP address */ | 
 | 		debug_cond(DEBUG_DEV_PKT, "Got ARP REQUEST, return our IP\n"); | 
 | 		pkt = (uchar *)et; | 
 | 		eth_hdr_size = net_update_ether(et, et->et_src, PROT_ARP); | 
 | 		pkt += eth_hdr_size; | 
 | 		arp->ar_op = htons(ARPOP_REPLY); | 
 | 		memcpy(&arp->ar_tha, &arp->ar_sha, ARP_HLEN); | 
 | 		net_copy_ip(&arp->ar_tpa, &arp->ar_spa); | 
 | 		memcpy(&arp->ar_sha, net_ethaddr, ARP_HLEN); | 
 | 		net_copy_ip(&arp->ar_spa, &net_ip); | 
 |  | 
 | #ifdef CONFIG_CMD_LINK_LOCAL | 
 | 		/* | 
 | 		 * Work-around for brain-damaged Cisco equipment with | 
 | 		 *   arp-proxy enabled. | 
 | 		 * | 
 | 		 *   If the requesting IP is not on our subnet, wait 5ms to | 
 | 		 *   reply to ARP request so that our reply will overwrite | 
 | 		 *   the arp-proxy's instead of the other way around. | 
 | 		 */ | 
 | 		if ((net_read_ip(&arp->ar_tpa).s_addr & net_netmask.s_addr) != | 
 | 		    (net_read_ip(&arp->ar_spa).s_addr & net_netmask.s_addr)) | 
 | 			udelay(5000); | 
 | #endif | 
 | 		net_send_packet((uchar *)et, eth_hdr_size + ARP_HDR_SIZE); | 
 | 		return; | 
 |  | 
 | 	case ARPOP_REPLY:		/* arp reply */ | 
 | 		/* are we waiting for a reply */ | 
 | 		if (!net_arp_wait_packet_ip.s_addr) | 
 | 			break; | 
 |  | 
 | #ifdef CONFIG_KEEP_SERVERADDR | 
 | 		if (net_server_ip.s_addr == net_arp_wait_packet_ip.s_addr) { | 
 | 			char buf[20]; | 
 | 			sprintf(buf, "%pM", &arp->ar_sha); | 
 | 			setenv("serveraddr", buf); | 
 | 		} | 
 | #endif | 
 |  | 
 | 		reply_ip_addr = net_read_ip(&arp->ar_spa); | 
 |  | 
 | 		/* matched waiting packet's address */ | 
 | 		if (reply_ip_addr.s_addr == net_arp_wait_reply_ip.s_addr) { | 
 | 			debug_cond(DEBUG_DEV_PKT, | 
 | 				   "Got ARP REPLY, set eth addr (%pM)\n", | 
 | 				   arp->ar_data); | 
 |  | 
 | 			/* save address for later use */ | 
 | 			if (arp_wait_packet_ethaddr != NULL) | 
 | 				memcpy(arp_wait_packet_ethaddr, | 
 | 				       &arp->ar_sha, ARP_HLEN); | 
 |  | 
 | 			net_get_arp_handler()((uchar *)arp, 0, reply_ip_addr, | 
 | 					      0, len); | 
 |  | 
 | 			/* set the mac address in the waiting packet's header | 
 | 			   and transmit it */ | 
 | 			memcpy(((struct ethernet_hdr *)net_tx_packet)->et_dest, | 
 | 			       &arp->ar_sha, ARP_HLEN); | 
 | 			net_send_packet(net_tx_packet, arp_wait_tx_packet_size); | 
 |  | 
 | 			/* no arp request pending now */ | 
 | 			net_arp_wait_packet_ip.s_addr = 0; | 
 | 			arp_wait_tx_packet_size = 0; | 
 | 			arp_wait_packet_ethaddr = NULL; | 
 | 		} | 
 | 		return; | 
 | 	default: | 
 | 		debug("Unexpected ARP opcode 0x%x\n", | 
 | 		      ntohs(arp->ar_op)); | 
 | 		return; | 
 | 	} | 
 | } |