| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. |
| * |
| * Dave Liu <daveliu@freescale.com> |
| * based on the contribution of Marian Balakowicz <m8@semihalf.com> |
| */ |
| |
| #include <common.h> |
| #include <mpc83xx.h> |
| #include <command.h> |
| |
| #if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) |
| void ecc_print_status(void) |
| { |
| immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| #ifdef CONFIG_SYS_FSL_DDR2 |
| struct ccsr_ddr __iomem *ddr = &immap->ddr; |
| #else |
| ddr83xx_t *ddr = &immap->ddr; |
| #endif |
| |
| printf("\nECC mode: %s\n\n", |
| (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); |
| |
| /* Interrupts */ |
| printf("Memory Error Interrupt Enable:\n"); |
| printf(" Multiple-Bit Error Interrupt Enable: %d\n", |
| (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); |
| printf(" Single-Bit Error Interrupt Enable: %d\n", |
| (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); |
| printf(" Memory Select Error Interrupt Enable: %d\n\n", |
| (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); |
| |
| /* Error disable */ |
| printf("Memory Error Disable:\n"); |
| printf(" Multiple-Bit Error Disable: %d\n", |
| (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); |
| printf(" Single-Bit Error Disable: %d\n", |
| (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); |
| printf(" Memory Select Error Disable: %d\n\n", |
| (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); |
| |
| /* Error injection */ |
| printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n", |
| ddr->data_err_inject_hi, ddr->data_err_inject_lo); |
| |
| printf("Memory Data Path Error Injection Mask ECC:\n"); |
| printf(" ECC Mirror Byte: %d\n", |
| (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); |
| printf(" ECC Injection Enable: %d\n", |
| (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); |
| printf(" ECC Error Injection Mask: 0x%02x\n\n", |
| ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); |
| |
| /* SBE counter/threshold */ |
| printf("Memory Single-Bit Error Management (0..255):\n"); |
| printf(" Single-Bit Error Threshold: %d\n", |
| (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); |
| printf(" Single-Bit Error Counter: %d\n\n", |
| (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); |
| |
| /* Error detect */ |
| printf("Memory Error Detect:\n"); |
| printf(" Multiple Memory Errors: %d\n", |
| (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); |
| printf(" Multiple-Bit Error: %d\n", |
| (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); |
| printf(" Single-Bit Error: %d\n", |
| (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); |
| printf(" Memory Select Error: %d\n\n", |
| (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); |
| |
| /* Capture data */ |
| printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address); |
| printf("Memory Data Path Read Capture High/Low: %08x %08x\n", |
| ddr->capture_data_hi, ddr->capture_data_lo); |
| printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", |
| ddr->capture_ecc & CAPTURE_ECC_ECE); |
| |
| printf("Memory Error Attributes Capture:\n"); |
| printf(" Data Beat Number: %d\n", |
| (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> |
| ECC_CAPT_ATTR_BNUM_SHIFT); |
| printf(" Transaction Size: %d\n", |
| (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> |
| ECC_CAPT_ATTR_TSIZ_SHIFT); |
| printf(" Transaction Source: %d\n", |
| (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> |
| ECC_CAPT_ATTR_TSRC_SHIFT); |
| printf(" Transaction Type: %d\n", |
| (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> |
| ECC_CAPT_ATTR_TTYP_SHIFT); |
| printf(" Error Information Valid: %d\n\n", |
| ddr->capture_attributes & ECC_CAPT_ATTR_VLD); |
| } |
| |
| int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| #ifdef CONFIG_SYS_FSL_DDR2 |
| struct ccsr_ddr __iomem *ddr = &immap->ddr; |
| #else |
| ddr83xx_t *ddr = &immap->ddr; |
| #endif |
| volatile u32 val; |
| u64 *addr; |
| u32 count; |
| register u64 *i; |
| u32 ret[2]; |
| u32 pattern[2]; |
| u32 writeback[2]; |
| |
| /* The pattern is written into memory to generate error */ |
| pattern[0] = 0xfedcba98UL; |
| pattern[1] = 0x76543210UL; |
| |
| /* After injecting error, re-initialize the memory with the value */ |
| writeback[0] = 0x01234567UL; |
| writeback[1] = 0x89abcdefUL; |
| |
| if (argc > 4) |
| return cmd_usage(cmdtp); |
| |
| if (argc == 2) { |
| if (strcmp(argv[1], "status") == 0) { |
| ecc_print_status(); |
| return 0; |
| } else if (strcmp(argv[1], "captureclear") == 0) { |
| ddr->capture_address = 0; |
| ddr->capture_data_hi = 0; |
| ddr->capture_data_lo = 0; |
| ddr->capture_ecc = 0; |
| ddr->capture_attributes = 0; |
| return 0; |
| } |
| } |
| if (argc == 3) { |
| if (strcmp(argv[1], "sbecnt") == 0) { |
| val = simple_strtoul(argv[2], NULL, 10); |
| if (val > 255) { |
| printf("Incorrect Counter value, " |
| "should be 0..255\n"); |
| return 1; |
| } |
| |
| val = (val << ECC_ERROR_MAN_SBEC_SHIFT); |
| val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); |
| |
| ddr->err_sbe = val; |
| return 0; |
| } else if (strcmp(argv[1], "sbethr") == 0) { |
| val = simple_strtoul(argv[2], NULL, 10); |
| if (val > 255) { |
| printf("Incorrect Counter value, " |
| "should be 0..255\n"); |
| return 1; |
| } |
| |
| val = (val << ECC_ERROR_MAN_SBET_SHIFT); |
| val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); |
| |
| ddr->err_sbe = val; |
| return 0; |
| } else if (strcmp(argv[1], "errdisable") == 0) { |
| val = ddr->err_disable; |
| |
| if (strcmp(argv[2], "+sbe") == 0) { |
| val |= ECC_ERROR_DISABLE_SBED; |
| } else if (strcmp(argv[2], "+mbe") == 0) { |
| val |= ECC_ERROR_DISABLE_MBED; |
| } else if (strcmp(argv[2], "+mse") == 0) { |
| val |= ECC_ERROR_DISABLE_MSED; |
| } else if (strcmp(argv[2], "+all") == 0) { |
| val |= (ECC_ERROR_DISABLE_SBED | |
| ECC_ERROR_DISABLE_MBED | |
| ECC_ERROR_DISABLE_MSED); |
| } else if (strcmp(argv[2], "-sbe") == 0) { |
| val &= ~ECC_ERROR_DISABLE_SBED; |
| } else if (strcmp(argv[2], "-mbe") == 0) { |
| val &= ~ECC_ERROR_DISABLE_MBED; |
| } else if (strcmp(argv[2], "-mse") == 0) { |
| val &= ~ECC_ERROR_DISABLE_MSED; |
| } else if (strcmp(argv[2], "-all") == 0) { |
| val &= ~(ECC_ERROR_DISABLE_SBED | |
| ECC_ERROR_DISABLE_MBED | |
| ECC_ERROR_DISABLE_MSED); |
| } else { |
| printf("Incorrect err_disable field\n"); |
| return 1; |
| } |
| |
| ddr->err_disable = val; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| return 0; |
| } else if (strcmp(argv[1], "errdetectclr") == 0) { |
| val = ddr->err_detect; |
| |
| if (strcmp(argv[2], "mme") == 0) { |
| val |= ECC_ERROR_DETECT_MME; |
| } else if (strcmp(argv[2], "sbe") == 0) { |
| val |= ECC_ERROR_DETECT_SBE; |
| } else if (strcmp(argv[2], "mbe") == 0) { |
| val |= ECC_ERROR_DETECT_MBE; |
| } else if (strcmp(argv[2], "mse") == 0) { |
| val |= ECC_ERROR_DETECT_MSE; |
| } else if (strcmp(argv[2], "all") == 0) { |
| val |= (ECC_ERROR_DETECT_MME | |
| ECC_ERROR_DETECT_MBE | |
| ECC_ERROR_DETECT_SBE | |
| ECC_ERROR_DETECT_MSE); |
| } else { |
| printf("Incorrect err_detect field\n"); |
| return 1; |
| } |
| |
| ddr->err_detect = val; |
| return 0; |
| } else if (strcmp(argv[1], "injectdatahi") == 0) { |
| val = simple_strtoul(argv[2], NULL, 16); |
| |
| ddr->data_err_inject_hi = val; |
| return 0; |
| } else if (strcmp(argv[1], "injectdatalo") == 0) { |
| val = simple_strtoul(argv[2], NULL, 16); |
| |
| ddr->data_err_inject_lo = val; |
| return 0; |
| } else if (strcmp(argv[1], "injectecc") == 0) { |
| val = simple_strtoul(argv[2], NULL, 16); |
| if (val > 0xff) { |
| printf("Incorrect ECC inject mask, " |
| "should be 0x00..0xff\n"); |
| return 1; |
| } |
| val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); |
| |
| ddr->ecc_err_inject = val; |
| return 0; |
| } else if (strcmp(argv[1], "inject") == 0) { |
| val = ddr->ecc_err_inject; |
| |
| if (strcmp(argv[2], "en") == 0) |
| val |= ECC_ERR_INJECT_EIEN; |
| else if (strcmp(argv[2], "dis") == 0) |
| val &= ~ECC_ERR_INJECT_EIEN; |
| else |
| printf("Incorrect command\n"); |
| |
| ddr->ecc_err_inject = val; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| return 0; |
| } else if (strcmp(argv[1], "mirror") == 0) { |
| val = ddr->ecc_err_inject; |
| |
| if (strcmp(argv[2], "en") == 0) |
| val |= ECC_ERR_INJECT_EMB; |
| else if (strcmp(argv[2], "dis") == 0) |
| val &= ~ECC_ERR_INJECT_EMB; |
| else |
| printf("Incorrect command\n"); |
| |
| ddr->ecc_err_inject = val; |
| return 0; |
| } |
| } |
| if (argc == 4) { |
| if (strcmp(argv[1], "testdw") == 0) { |
| addr = (u64 *) simple_strtoul(argv[2], NULL, 16); |
| count = simple_strtoul(argv[3], NULL, 16); |
| |
| if ((u32) addr % 8) { |
| printf("Address not aligned on " |
| "double word boundary\n"); |
| return 1; |
| } |
| disable_interrupts(); |
| |
| for (i = addr; i < addr + count; i++) { |
| |
| /* enable injects */ |
| ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| |
| /* write memory location injecting errors */ |
| ppcDWstore((u32 *) i, pattern); |
| __asm__ __volatile__("sync"); |
| |
| /* disable injects */ |
| ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| |
| /* read data, this generates ECC error */ |
| ppcDWload((u32 *) i, ret); |
| __asm__ __volatile__("sync"); |
| |
| /* re-initialize memory, double word write the location again, |
| * generates new ECC code this time */ |
| ppcDWstore((u32 *) i, writeback); |
| __asm__ __volatile__("sync"); |
| } |
| enable_interrupts(); |
| return 0; |
| } |
| if (strcmp(argv[1], "testword") == 0) { |
| addr = (u64 *) simple_strtoul(argv[2], NULL, 16); |
| count = simple_strtoul(argv[3], NULL, 16); |
| |
| if ((u32) addr % 8) { |
| printf("Address not aligned on " |
| "double word boundary\n"); |
| return 1; |
| } |
| disable_interrupts(); |
| |
| for (i = addr; i < addr + count; i++) { |
| |
| /* enable injects */ |
| ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| |
| /* write memory location injecting errors */ |
| *(u32 *) i = 0xfedcba98UL; |
| __asm__ __volatile__("sync"); |
| |
| /* sub double word write, |
| * bus will read-modify-write, |
| * generates ECC error */ |
| *((u32 *) i + 1) = 0x76543210UL; |
| __asm__ __volatile__("sync"); |
| |
| /* disable injects */ |
| ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; |
| __asm__ __volatile__("sync"); |
| __asm__ __volatile__("isync"); |
| |
| /* re-initialize memory, |
| * double word write the location again, |
| * generates new ECC code this time */ |
| ppcDWstore((u32 *) i, writeback); |
| __asm__ __volatile__("sync"); |
| } |
| enable_interrupts(); |
| return 0; |
| } |
| } |
| return cmd_usage(cmdtp); |
| } |
| |
| U_BOOT_CMD(ecc, 4, 0, do_ecc, |
| "support for DDR ECC features", |
| "status - print out status info\n" |
| "ecc captureclear - clear capture regs data\n" |
| "ecc sbecnt <val> - set Single-Bit Error counter\n" |
| "ecc sbethr <val> - set Single-Bit Threshold\n" |
| "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n" |
| " [-|+]sbe - Single-Bit Error\n" |
| " [-|+]mbe - Multiple-Bit Error\n" |
| " [-|+]mse - Memory Select Error\n" |
| " [-|+]all - all errors\n" |
| "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n" |
| " mme - Multiple Memory Errors\n" |
| " sbe - Single-Bit Error\n" |
| " mbe - Multiple-Bit Error\n" |
| " mse - Memory Select Error\n" |
| " all - all errors\n" |
| "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n" |
| "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n" |
| "ecc injectecc <ecc> - set ECC Error Injection Mask\n" |
| "ecc inject <en|dis> - enable/disable error injection\n" |
| "ecc mirror <en|dis> - enable/disable mirror byte\n" |
| "ecc testdw <addr> <cnt> - test mem region with double word access:\n" |
| " - enables injects\n" |
| " - writes pattern injecting errors with double word access\n" |
| " - disables injects\n" |
| " - reads pattern back with double word access, generates error\n" |
| " - re-inits memory\n" |
| "ecc testword <addr> <cnt> - test mem region with word access:\n" |
| " - enables injects\n" |
| " - writes pattern injecting errors with word access\n" |
| " - writes pattern with word access, generates error\n" |
| " - disables injects\n" " - re-inits memory"); |
| #endif |