| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017, STMicroelectronics - All Rights Reserved |
| * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| |
| #define MODE_BITS(gpio_pin) (gpio_pin * 2) |
| #define MODE_BITS_MASK 3 |
| #define BSRR_BIT(gpio_pin, value) BIT(gpio_pin + (value ? 0 : 16)) |
| |
| #ifndef CONFIG_SPL_BUILD |
| /* |
| * convert gpio offset to gpio index taking into account gpio holes |
| * into gpio bank |
| */ |
| int stm32_offset_to_index(struct udevice *dev, unsigned int offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| int idx = 0; |
| int i; |
| |
| for (i = 0; i < STM32_GPIOS_PER_BANK; i++) { |
| if (priv->gpio_range & BIT(i)) { |
| if (idx == offset) |
| return idx; |
| idx++; |
| } |
| } |
| /* shouldn't happen */ |
| return -EINVAL; |
| } |
| |
| static int stm32_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int bits_index; |
| int mask; |
| int idx; |
| |
| idx = stm32_offset_to_index(dev, offset); |
| if (idx < 0) |
| return idx; |
| |
| bits_index = MODE_BITS(idx); |
| mask = MODE_BITS_MASK << bits_index; |
| |
| clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_IN << bits_index); |
| |
| return 0; |
| } |
| |
| static int stm32_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int bits_index; |
| int mask; |
| int idx; |
| |
| idx = stm32_offset_to_index(dev, offset); |
| if (idx < 0) |
| return idx; |
| |
| bits_index = MODE_BITS(idx); |
| mask = MODE_BITS_MASK << bits_index; |
| |
| clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_OUT << bits_index); |
| |
| writel(BSRR_BIT(idx, value), ®s->bsrr); |
| |
| return 0; |
| } |
| |
| static int stm32_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int idx; |
| |
| idx = stm32_offset_to_index(dev, offset); |
| if (idx < 0) |
| return idx; |
| |
| return readl(®s->idr) & BIT(idx) ? 1 : 0; |
| } |
| |
| static int stm32_gpio_set_value(struct udevice *dev, unsigned offset, int value) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int idx; |
| |
| idx = stm32_offset_to_index(dev, offset); |
| if (idx < 0) |
| return idx; |
| |
| writel(BSRR_BIT(idx, value), ®s->bsrr); |
| |
| return 0; |
| } |
| |
| static int stm32_gpio_get_function(struct udevice *dev, unsigned int offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int bits_index; |
| int mask; |
| int idx; |
| u32 mode; |
| |
| idx = stm32_offset_to_index(dev, offset); |
| if (idx < 0) |
| return idx; |
| |
| bits_index = MODE_BITS(idx); |
| mask = MODE_BITS_MASK << bits_index; |
| |
| mode = (readl(®s->moder) & mask) >> bits_index; |
| if (mode == STM32_GPIO_MODE_OUT) |
| return GPIOF_OUTPUT; |
| if (mode == STM32_GPIO_MODE_IN) |
| return GPIOF_INPUT; |
| if (mode == STM32_GPIO_MODE_AN) |
| return GPIOF_UNUSED; |
| |
| return GPIOF_FUNC; |
| } |
| |
| static const struct dm_gpio_ops gpio_stm32_ops = { |
| .direction_input = stm32_gpio_direction_input, |
| .direction_output = stm32_gpio_direction_output, |
| .get_value = stm32_gpio_get_value, |
| .set_value = stm32_gpio_set_value, |
| .get_function = stm32_gpio_get_function, |
| }; |
| #endif |
| |
| static int gpio_stm32_probe(struct udevice *dev) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct clk clk; |
| fdt_addr_t addr; |
| int ret; |
| |
| addr = dev_read_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->regs = (struct stm32_gpio_regs *)addr; |
| |
| #ifndef CONFIG_SPL_BUILD |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct ofnode_phandle_args args; |
| const char *name; |
| int i; |
| |
| name = dev_read_string(dev, "st,bank-name"); |
| if (!name) |
| return -EINVAL; |
| uc_priv->bank_name = name; |
| |
| i = 0; |
| ret = dev_read_phandle_with_args(dev, "gpio-ranges", |
| NULL, 3, i, &args); |
| |
| if (ret == -ENOENT) { |
| uc_priv->gpio_count = STM32_GPIOS_PER_BANK; |
| priv->gpio_range = GENMASK(STM32_GPIOS_PER_BANK - 1, 0); |
| } |
| |
| while (ret != -ENOENT) { |
| priv->gpio_range |= GENMASK(args.args[2] + args.args[0] - 1, |
| args.args[0]); |
| |
| uc_priv->gpio_count += args.args[2]; |
| |
| ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, |
| ++i, &args); |
| } |
| |
| dev_dbg(dev, "addr = 0x%p bank_name = %s gpio_count = %d gpio_range = 0x%x\n", |
| (u32 *)priv->regs, uc_priv->bank_name, uc_priv->gpio_count, |
| priv->gpio_range); |
| #endif |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| |
| if (ret) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| debug("clock enabled for device %s\n", dev->name); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id stm32_gpio_ids[] = { |
| { .compatible = "st,stm32-gpio" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(gpio_stm32) = { |
| .name = "gpio_stm32", |
| .id = UCLASS_GPIO, |
| .of_match = stm32_gpio_ids, |
| .probe = gpio_stm32_probe, |
| #ifndef CONFIG_SPL_BUILD |
| .ops = &gpio_stm32_ops, |
| #endif |
| .flags = DM_UC_FLAG_SEQ_ALIAS, |
| .priv_auto_alloc_size = sizeof(struct stm32_gpio_priv), |
| }; |