| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Atmel PIO4 device driver |
| * |
| * Copyright (C) 2015 Atmel Corporation |
| * Wenyou.Yang <wenyou.yang@atmel.com> |
| */ |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/gpio.h> |
| #include <mach/gpio.h> |
| #include <mach/atmel_pio4.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct atmel_pio4_port *atmel_pio4_port_base(u32 port) |
| { |
| struct atmel_pio4_port *base = NULL; |
| |
| switch (port) { |
| case AT91_PIO_PORTA: |
| base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA; |
| break; |
| case AT91_PIO_PORTB: |
| base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB; |
| break; |
| case AT91_PIO_PORTC: |
| base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC; |
| break; |
| case AT91_PIO_PORTD: |
| base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD; |
| break; |
| default: |
| printf("Error: Atmel PIO4: Failed to get PIO base of port#%d!\n", |
| port); |
| break; |
| } |
| |
| return base; |
| } |
| |
| static int atmel_pio4_config_io_func(u32 port, u32 pin, |
| u32 func, u32 config) |
| { |
| struct atmel_pio4_port *port_base; |
| u32 reg, mask; |
| |
| if (pin >= ATMEL_PIO_NPINS_PER_BANK) |
| return -EINVAL; |
| |
| port_base = atmel_pio4_port_base(port); |
| if (!port_base) |
| return -EINVAL; |
| |
| mask = 1 << pin; |
| reg = func; |
| reg |= config; |
| |
| writel(mask, &port_base->mskr); |
| writel(reg, &port_base->cfgr); |
| |
| return 0; |
| } |
| |
| int atmel_pio4_set_gpio(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_GPIO, |
| config); |
| } |
| |
| int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_A, |
| config); |
| } |
| |
| int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_B, |
| config); |
| } |
| |
| int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_C, |
| config); |
| } |
| |
| int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_D, |
| config); |
| } |
| |
| int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_E, |
| config); |
| } |
| |
| int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_F, |
| config); |
| } |
| |
| int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 config) |
| { |
| return atmel_pio4_config_io_func(port, pin, |
| ATMEL_PIO_CFGR_FUNC_PERIPH_G, |
| config); |
| } |
| |
| int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value) |
| { |
| struct atmel_pio4_port *port_base; |
| u32 reg, mask; |
| |
| if (pin >= ATMEL_PIO_NPINS_PER_BANK) |
| return -EINVAL; |
| |
| port_base = atmel_pio4_port_base(port); |
| if (!port_base) |
| return -EINVAL; |
| |
| mask = 0x01 << pin; |
| reg = ATMEL_PIO_CFGR_FUNC_GPIO | ATMEL_PIO_DIR_MASK; |
| |
| writel(mask, &port_base->mskr); |
| writel(reg, &port_base->cfgr); |
| |
| if (value) |
| writel(mask, &port_base->sodr); |
| else |
| writel(mask, &port_base->codr); |
| |
| return 0; |
| } |
| |
| int atmel_pio4_get_pio_input(u32 port, u32 pin) |
| { |
| struct atmel_pio4_port *port_base; |
| u32 reg, mask; |
| |
| if (pin >= ATMEL_PIO_NPINS_PER_BANK) |
| return -EINVAL; |
| |
| port_base = atmel_pio4_port_base(port); |
| if (!port_base) |
| return -EINVAL; |
| |
| mask = 0x01 << pin; |
| reg = ATMEL_PIO_CFGR_FUNC_GPIO; |
| |
| writel(mask, &port_base->mskr); |
| writel(reg, &port_base->cfgr); |
| |
| return (readl(&port_base->pdsr) & mask) ? 1 : 0; |
| } |
| |
| #ifdef CONFIG_DM_GPIO |
| |
| struct atmel_pioctrl_data { |
| u32 nbanks; |
| }; |
| |
| struct atmel_pio4_platdata { |
| struct atmel_pio4_port *reg_base; |
| }; |
| |
| static struct atmel_pio4_port *atmel_pio4_bank_base(struct udevice *dev, |
| u32 bank) |
| { |
| struct atmel_pio4_platdata *plat = dev_get_platdata(dev); |
| struct atmel_pio4_port *port_base = |
| (struct atmel_pio4_port *)((u32)plat->reg_base + |
| ATMEL_PIO_BANK_OFFSET * bank); |
| |
| return port_base; |
| } |
| |
| static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset) |
| { |
| u32 bank = ATMEL_PIO_BANK(offset); |
| u32 line = ATMEL_PIO_LINE(offset); |
| struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank); |
| u32 mask = BIT(line); |
| |
| writel(mask, &port_base->mskr); |
| |
| clrbits_le32(&port_base->cfgr, |
| ATMEL_PIO_CFGR_FUNC_MASK | ATMEL_PIO_DIR_MASK); |
| |
| return 0; |
| } |
| |
| static int atmel_pio4_direction_output(struct udevice *dev, |
| unsigned offset, int value) |
| { |
| u32 bank = ATMEL_PIO_BANK(offset); |
| u32 line = ATMEL_PIO_LINE(offset); |
| struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank); |
| u32 mask = BIT(line); |
| |
| writel(mask, &port_base->mskr); |
| |
| clrsetbits_le32(&port_base->cfgr, |
| ATMEL_PIO_CFGR_FUNC_MASK, ATMEL_PIO_DIR_MASK); |
| |
| if (value) |
| writel(mask, &port_base->sodr); |
| else |
| writel(mask, &port_base->codr); |
| |
| return 0; |
| } |
| |
| static int atmel_pio4_get_value(struct udevice *dev, unsigned offset) |
| { |
| u32 bank = ATMEL_PIO_BANK(offset); |
| u32 line = ATMEL_PIO_LINE(offset); |
| struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank); |
| u32 mask = BIT(line); |
| |
| return (readl(&port_base->pdsr) & mask) ? 1 : 0; |
| } |
| |
| static int atmel_pio4_set_value(struct udevice *dev, |
| unsigned offset, int value) |
| { |
| u32 bank = ATMEL_PIO_BANK(offset); |
| u32 line = ATMEL_PIO_LINE(offset); |
| struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank); |
| u32 mask = BIT(line); |
| |
| if (value) |
| writel(mask, &port_base->sodr); |
| else |
| writel(mask, &port_base->codr); |
| |
| return 0; |
| } |
| |
| static int atmel_pio4_get_function(struct udevice *dev, unsigned offset) |
| { |
| u32 bank = ATMEL_PIO_BANK(offset); |
| u32 line = ATMEL_PIO_LINE(offset); |
| struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank); |
| u32 mask = BIT(line); |
| |
| writel(mask, &port_base->mskr); |
| |
| return (readl(&port_base->cfgr) & |
| ATMEL_PIO_DIR_MASK) ? GPIOF_OUTPUT : GPIOF_INPUT; |
| } |
| |
| static const struct dm_gpio_ops atmel_pio4_ops = { |
| .direction_input = atmel_pio4_direction_input, |
| .direction_output = atmel_pio4_direction_output, |
| .get_value = atmel_pio4_get_value, |
| .set_value = atmel_pio4_set_value, |
| .get_function = atmel_pio4_get_function, |
| }; |
| |
| static int atmel_pio4_bind(struct udevice *dev) |
| { |
| return dm_scan_fdt_dev(dev); |
| } |
| |
| static int atmel_pio4_probe(struct udevice *dev) |
| { |
| struct atmel_pio4_platdata *plat = dev_get_platdata(dev); |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct atmel_pioctrl_data *pioctrl_data; |
| struct clk clk; |
| fdt_addr_t addr_base; |
| u32 nbanks; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret) |
| return ret; |
| |
| clk_free(&clk); |
| |
| addr_base = devfdt_get_addr(dev); |
| if (addr_base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| plat->reg_base = (struct atmel_pio4_port *)addr_base; |
| |
| pioctrl_data = (struct atmel_pioctrl_data *)dev_get_driver_data(dev); |
| nbanks = pioctrl_data->nbanks; |
| |
| uc_priv->bank_name = fdt_get_name(gd->fdt_blob, dev_of_offset(dev), |
| NULL); |
| uc_priv->gpio_count = nbanks * ATMEL_PIO_NPINS_PER_BANK; |
| |
| return 0; |
| } |
| |
| /* |
| * The number of banks can be different from a SoC to another one. |
| * We can have up to 16 banks. |
| */ |
| static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = { |
| .nbanks = 4, |
| }; |
| |
| static const struct udevice_id atmel_pio4_ids[] = { |
| { |
| .compatible = "atmel,sama5d2-gpio", |
| .data = (ulong)&atmel_sama5d2_pioctrl_data, |
| }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(gpio_atmel_pio4) = { |
| .name = "gpio_atmel_pio4", |
| .id = UCLASS_GPIO, |
| .ops = &atmel_pio4_ops, |
| .probe = atmel_pio4_probe, |
| .bind = atmel_pio4_bind, |
| .of_match = atmel_pio4_ids, |
| .platdata_auto_alloc_size = sizeof(struct atmel_pio4_platdata), |
| }; |
| |
| #endif |