| /* |
| * Copyright 2018 NXP |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/ddr.h> |
| #include <asm/arch/clock.h> |
| #include "../ddr.h" |
| #include "ddr3_define.h" |
| |
| void ddr3_phyinit_train_sw_ffc(unsigned int after_retention) |
| { |
| /* [dwc_ddrphy_phyinit_main] Start of dwc_ddrphy_phyinit_main() */ |
| /* [dwc_ddrphy_phyinit_sequence] Start of dwc_ddrphy_phyinit_sequence() */ |
| /* [dwc_ddrphy_phyinit_initStruct] Start of dwc_ddrphy_phyinit_initStruct() */ |
| /* [dwc_ddrphy_phyinit_initStruct] End of dwc_ddrphy_phyinit_initStruct() */ |
| /* [dwc_ddrphy_phyinit_setDefault] Start of dwc_ddrphy_phyinit_setDefault() */ |
| /* [dwc_ddrphy_phyinit_setDefault] End of dwc_ddrphy_phyinit_setDefault() */ |
| |
| |
| /* ############################################################## */ |
| /* */ |
| /* dwc_ddrphy_phyinit_userCustom_overrideUserInput is a user-editable function. */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| |
| dwc_ddrphy_phyinit_userCustom_overrideUserInput (); |
| /* */ |
| /* [dwc_ddrphy_phyinit_userCustom_overrideUserInput] End of dwc_ddrphy_phyinit_userCustom_overrideUserInput() */ |
| |
| |
| /* ############################################################## */ |
| /* */ |
| /* Step (A) : Bring up VDD, VDDQ, and VAA */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| |
| |
| dwc_ddrphy_phyinit_userCustom_A_bringupPower (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_A_bringupPower] End of dwc_ddrphy_phyinit_userCustom_A_bringupPower() */ |
| /* [dwc_ddrphy_phyinit_userCustom_B_startClockResetPhy] Start of dwc_ddrphy_phyinit_userCustom_B_startClockResetPhy() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* Step (B) Start Clocks and Reset the PHY */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| dwc_ddrphy_phyinit_userCustom_B_startClockResetPhy (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_B_startClockResetPhy] End of dwc_ddrphy_phyinit_userCustom_B_startClockResetPhy() */ |
| /* */ |
| |
| /* ############################################################## */ |
| /* */ |
| /* Step (C) Initialize PHY Configuration */ |
| /* */ |
| /* Load the required PHY configuration registers for the appropriate mode and memory configuration */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| |
| /* [phyinit_C_initPhyConfig] Start of dwc_ddrphy_phyinit_C_initPhyConfig() */ |
| /* */ |
| /* ############################################################## */ |
| /* TxPreDrvMode[2] = 0 */ |
| /* ############################################################## */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxSlewRate::TxPreDrvMode to 0x3 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxSlewRate::TxPreP to 0xf */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxSlewRate::TxPreN to 0xc */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for TxSlewRate::TxPreP and TxSlewRate::TxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x1005f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1015f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1105f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1115f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1205f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1215f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1305f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1315f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b1_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxSlewRate::TxPreDrvMode to 0x3 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxSlewRate::TxPreP to 0xf */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxSlewRate::TxPreN to 0xc */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for TxSlewRate::TxPreP and TxSlewRate::TxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x11005f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11015f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11105f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11115f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11205f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11215f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11305f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11315f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b1_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxSlewRate::TxPreDrvMode to 0x3 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxSlewRate::TxPreP to 0xf */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxSlewRate::TxPreN to 0xc */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for TxSlewRate::TxPreP and TxSlewRate::TxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x21005f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21015f, 0x3cf); /* DWC_DDRPHYA_DBYTE0_TxSlewRate_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21105f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21115f, 0x3cf); /* DWC_DDRPHYA_DBYTE1_TxSlewRate_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21205f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21215f, 0x3cf); /* DWC_DDRPHYA_DBYTE2_TxSlewRate_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21305f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21315f, 0x3cf); /* DWC_DDRPHYA_DBYTE3_TxSlewRate_b1_p2 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=0 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=0 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=0 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x55, 0x365); /* DWC_DDRPHYA_ANIB0_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=1 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=1 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=1 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x1055, 0x365); /* DWC_DDRPHYA_ANIB1_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=2 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=2 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=2 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x2055, 0x365); /* DWC_DDRPHYA_ANIB2_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=3 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=3 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=3 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x3055, 0x365); /* DWC_DDRPHYA_ANIB3_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x0, ANIB=4 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=4 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=4 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x4055, 0x65); /* DWC_DDRPHYA_ANIB4_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x0, ANIB=5 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=5 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=5 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x5055, 0x65); /* DWC_DDRPHYA_ANIB5_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=6 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=6 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=6 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x6055, 0x365); /* DWC_DDRPHYA_ANIB6_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=7 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=7 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=7 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x7055, 0x365); /* DWC_DDRPHYA_ANIB7_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=8 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=8 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=8 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x8055, 0x365); /* DWC_DDRPHYA_ANIB8_ATxSlewRate */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreDrvMode to 0x3, ANIB=9 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreP to 0x5, ANIB=9 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxSlewRate::ATxPreN to 0x6, ANIB=9 */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Optimal setting for ATxSlewRate::ATxPreP and ATxSlewRate::ATxPreP are technology specific. */ |
| /* [phyinit_C_initPhyConfig] ### NOTE ### Please consult the "Output Slew Rate" section of HSpice Model App Note in specific technology for recommended settings */ |
| |
| dwc_ddrphy_apb_wr(0x9055, 0x365); /* DWC_DDRPHYA_ANIB9_ATxSlewRate */ |
| dwc_ddrphy_apb_wr(0x200c5, 0xb); /* DWC_DDRPHYA_MASTER0_PllCtrl2_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming PllCtrl2 to b based on DfiClk frequency = 400. */ |
| dwc_ddrphy_apb_wr(0x1200c5, 0x7); /* DWC_DDRPHYA_MASTER0_PllCtrl2_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming PllCtrl2 to 7 based on DfiClk frequency = 133. */ |
| dwc_ddrphy_apb_wr(0x2200c5, 0x7); /* DWC_DDRPHYA_MASTER0_PllCtrl2_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming PllCtrl2 to 7 based on DfiClk frequency = 83. */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* Program ARdPtrInitVal based on Frequency and PLL Bypass inputs */ |
| /* The values programmed here assume ideal properties of DfiClk */ |
| /* and Pclk including: */ |
| /* - DfiClk skew */ |
| /* - DfiClk jitter */ |
| /* - DfiClk PVT variations */ |
| /* - Pclk skew */ |
| /* - Pclk jitter */ |
| /* */ |
| /* PLL Bypassed mode: */ |
| /* For MemClk frequency > 933MHz, the valid range of ARdPtrInitVal_p0[3:0] is: 2-6 */ |
| /* For MemClk frequency < 933MHz, the valid range of ARdPtrInitVal_p0[3:0] is: 1-6 */ |
| /* */ |
| /* PLL Enabled mode: */ |
| /* For MemClk frequency > 933MHz, the valid range of ARdPtrInitVal_p0[3:0] is: 1-6 */ |
| /* For MemClk frequency < 933MHz, the valid range of ARdPtrInitVal_p0[3:0] is: 0-6 */ |
| /* */ |
| /* ############################################################## */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming ARdPtrInitVal to 0x1 */ |
| dwc_ddrphy_apb_wr(0x2002e, 0x1); /* DWC_DDRPHYA_MASTER0_ARdPtrInitVal_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming ARdPtrInitVal to 0x1 */ |
| dwc_ddrphy_apb_wr(0x12002e, 0x1); /* DWC_DDRPHYA_MASTER0_ARdPtrInitVal_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming ARdPtrInitVal to 0x1 */ |
| dwc_ddrphy_apb_wr(0x22002e, 0x1); /* DWC_DDRPHYA_MASTER0_ARdPtrInitVal_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::TwoTckRxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::TwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::PositionDfeInit to 0x2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::LP4TglTwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::LP4PostambleExt to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl::LP4SttcPreBridgeRxEn to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DqsPreambleControl to 0x8 */ |
| dwc_ddrphy_apb_wr(0x20024, 0x8); /* DWC_DDRPHYA_MASTER0_DqsPreambleControl_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DbyteDllModeCntrl to 0x0 */ |
| dwc_ddrphy_apb_wr(0x2003a, 0x0); /* DWC_DDRPHYA_MASTER0_DbyteDllModeCntrl */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::TwoTckRxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::TwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::PositionDfeInit to 0x2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::LP4TglTwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::LP4PostambleExt to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl::LP4SttcPreBridgeRxEn to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DqsPreambleControl to 0x8 */ |
| dwc_ddrphy_apb_wr(0x120024, 0x8); /* DWC_DDRPHYA_MASTER0_DqsPreambleControl_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DbyteDllModeCntrl to 0x0 */ |
| dwc_ddrphy_apb_wr(0x2003a, 0x0); /* DWC_DDRPHYA_MASTER0_DbyteDllModeCntrl */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::TwoTckRxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::TwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::PositionDfeInit to 0x2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::LP4TglTwoTckTxDqsPre to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::LP4PostambleExt to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl::LP4SttcPreBridgeRxEn to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DqsPreambleControl to 0x8 */ |
| dwc_ddrphy_apb_wr(0x220024, 0x8); /* DWC_DDRPHYA_MASTER0_DqsPreambleControl_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DbyteDllModeCntrl to 0x0 */ |
| dwc_ddrphy_apb_wr(0x2003a, 0x0); /* DWC_DDRPHYA_MASTER0_DbyteDllModeCntrl */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming ProcOdtTimeCtl to 0xa */ |
| dwc_ddrphy_apb_wr(0x20056, 0xa); /* DWC_DDRPHYA_MASTER0_ProcOdtTimeCtl_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming ProcOdtTimeCtl to 0xa */ |
| dwc_ddrphy_apb_wr(0x120056, 0xa); /* DWC_DDRPHYA_MASTER0_ProcOdtTimeCtl_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming ProcOdtTimeCtl to 0xa */ |
| dwc_ddrphy_apb_wr(0x220056, 0xa); /* DWC_DDRPHYA_MASTER0_ProcOdtTimeCtl_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxOdtDrvStren::ODTStrenP to 0x18 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxOdtDrvStren::ODTStrenN to 0x18 */ |
| dwc_ddrphy_apb_wr(0x1004d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1014d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1104d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1114d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1204d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1214d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x1304d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x1314d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b1_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxOdtDrvStren::ODTStrenP to 0x18 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxOdtDrvStren::ODTStrenN to 0x18 */ |
| dwc_ddrphy_apb_wr(0x11004d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11014d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11104d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11114d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11204d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11214d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x11304d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x11314d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b1_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxOdtDrvStren::ODTStrenP to 0x18 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxOdtDrvStren::ODTStrenN to 0x18 */ |
| dwc_ddrphy_apb_wr(0x21004d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21014d, 0x618); /* DWC_DDRPHYA_DBYTE0_TxOdtDrvStren_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21104d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21114d, 0x618); /* DWC_DDRPHYA_DBYTE1_TxOdtDrvStren_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21204d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21214d, 0x618); /* DWC_DDRPHYA_DBYTE2_TxOdtDrvStren_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x21304d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x21314d, 0x618); /* DWC_DDRPHYA_DBYTE3_TxOdtDrvStren_b1_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqP to 0x38 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqN to 0x38 */ |
| dwc_ddrphy_apb_wr(0x10049, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x10149, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x11049, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x11149, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x12049, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x12149, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x13049, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x13149, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b1_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqP to 0x38 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqN to 0x38 */ |
| dwc_ddrphy_apb_wr(0x110049, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x110149, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x111049, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x111149, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x112049, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x112149, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x113049, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x113149, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b1_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqP to 0x38 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TxImpedanceCtrl1::DrvStrenFSDqN to 0x38 */ |
| dwc_ddrphy_apb_wr(0x210049, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x210149, 0xe38); /* DWC_DDRPHYA_DBYTE0_TxImpedanceCtrl1_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x211049, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x211149, 0xe38); /* DWC_DDRPHYA_DBYTE1_TxImpedanceCtrl1_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x212049, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x212149, 0xe38); /* DWC_DDRPHYA_DBYTE2_TxImpedanceCtrl1_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x213049, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x213149, 0xe38); /* DWC_DDRPHYA_DBYTE3_TxImpedanceCtrl1_b1_p2 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxImpedance::ADrvStrenP to 0x3 */ |
| /* [phyinit_C_initPhyConfig] Programming ATxImpedance::ADrvStrenN to 0x3 */ |
| dwc_ddrphy_apb_wr(0x43, 0x63); /* DWC_DDRPHYA_ANIB0_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x1043, 0x63); /* DWC_DDRPHYA_ANIB1_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x2043, 0x63); /* DWC_DDRPHYA_ANIB2_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x3043, 0x63); /* DWC_DDRPHYA_ANIB3_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x4043, 0x63); /* DWC_DDRPHYA_ANIB4_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x5043, 0x63); /* DWC_DDRPHYA_ANIB5_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x6043, 0x63); /* DWC_DDRPHYA_ANIB6_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x7043, 0x63); /* DWC_DDRPHYA_ANIB7_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x8043, 0x63); /* DWC_DDRPHYA_ANIB8_ATxImpedance */ |
| dwc_ddrphy_apb_wr(0x9043, 0x63); /* DWC_DDRPHYA_ANIB9_ATxImpedance */ |
| /* [phyinit_C_initPhyConfig] Programming DfiMode to 0x5 */ |
| dwc_ddrphy_apb_wr(0x20018, 0x5); /* DWC_DDRPHYA_MASTER0_DfiMode */ |
| /* [phyinit_C_initPhyConfig] Programming DfiCAMode to 0x0 */ |
| dwc_ddrphy_apb_wr(0x20075, 0x0); /* DWC_DDRPHYA_MASTER0_DfiCAMode */ |
| /* [phyinit_C_initPhyConfig] Programming CalDrvStr0::CalDrvStrPd50 to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Programming CalDrvStr0::CalDrvStrPu50 to 0x0 */ |
| dwc_ddrphy_apb_wr(0x20050, 0x0); /* DWC_DDRPHYA_MASTER0_CalDrvStr0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming CalUclkInfo::CalUClkTicksPer1uS to 0x190 */ |
| dwc_ddrphy_apb_wr(0x20008, 0x190); /* DWC_DDRPHYA_MASTER0_CalUclkInfo_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming CalUclkInfo::CalUClkTicksPer1uS to 0x85 */ |
| dwc_ddrphy_apb_wr(0x120008, 0x85); /* DWC_DDRPHYA_MASTER0_CalUclkInfo_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming CalUclkInfo::CalUClkTicksPer1uS to 0x53 */ |
| dwc_ddrphy_apb_wr(0x220008, 0x53); /* DWC_DDRPHYA_MASTER0_CalUclkInfo_p2 */ |
| /* [phyinit_C_initPhyConfig] Programming CalRate::CalInterval to 0x9 */ |
| /* [phyinit_C_initPhyConfig] Programming CalRate::CalOnce to 0x0 */ |
| dwc_ddrphy_apb_wr(0x20088, 0x9); /* DWC_DDRPHYA_MASTER0_CalRate */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Programming VrefInGlobal::GlobalVrefInSel to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Programming VrefInGlobal::GlobalVrefInDAC to 0x1f */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Programming VrefInGlobal to 0xf8 */ |
| dwc_ddrphy_apb_wr(0x200b2, 0xf8); /* DWC_DDRPHYA_MASTER0_VrefInGlobal_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Programming DqDqsRcvCntrl::MajorModeDbyte to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Programming DqDqsRcvCntrl to 0x581 */ |
| dwc_ddrphy_apb_wr(0x10043, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x10143, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x11043, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x11143, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x12043, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x12143, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b1_p0 */ |
| dwc_ddrphy_apb_wr(0x13043, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b0_p0 */ |
| dwc_ddrphy_apb_wr(0x13143, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b1_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Programming VrefInGlobal::GlobalVrefInSel to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Programming VrefInGlobal::GlobalVrefInDAC to 0x1f */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Programming VrefInGlobal to 0xf8 */ |
| dwc_ddrphy_apb_wr(0x1200b2, 0xf8); /* DWC_DDRPHYA_MASTER0_VrefInGlobal_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Programming DqDqsRcvCntrl::MajorModeDbyte to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Programming DqDqsRcvCntrl to 0x581 */ |
| dwc_ddrphy_apb_wr(0x110043, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x110143, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x111043, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x111143, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x112043, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x112143, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b1_p1 */ |
| dwc_ddrphy_apb_wr(0x113043, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b0_p1 */ |
| dwc_ddrphy_apb_wr(0x113143, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b1_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Programming VrefInGlobal::GlobalVrefInSel to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Programming VrefInGlobal::GlobalVrefInDAC to 0x1f */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Programming VrefInGlobal to 0xf8 */ |
| dwc_ddrphy_apb_wr(0x2200b2, 0xf8); /* DWC_DDRPHYA_MASTER0_VrefInGlobal_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Programming DqDqsRcvCntrl::MajorModeDbyte to 0x0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Programming DqDqsRcvCntrl to 0x581 */ |
| dwc_ddrphy_apb_wr(0x210043, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x210143, 0x581); /* DWC_DDRPHYA_DBYTE0_DqDqsRcvCntrl_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x211043, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x211143, 0x581); /* DWC_DDRPHYA_DBYTE1_DqDqsRcvCntrl_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x212043, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x212143, 0x581); /* DWC_DDRPHYA_DBYTE2_DqDqsRcvCntrl_b1_p2 */ |
| dwc_ddrphy_apb_wr(0x213043, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b0_p2 */ |
| dwc_ddrphy_apb_wr(0x213143, 0x581); /* DWC_DDRPHYA_DBYTE3_DqDqsRcvCntrl_b1_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming DfiFreqRatio_p0 to 0x1 */ |
| dwc_ddrphy_apb_wr(0x200fa, 0x1); /* DWC_DDRPHYA_MASTER0_DfiFreqRatio_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming DfiFreqRatio_p1 to 0x1 */ |
| dwc_ddrphy_apb_wr(0x1200fa, 0x1); /* DWC_DDRPHYA_MASTER0_DfiFreqRatio_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming DfiFreqRatio_p2 to 0x1 */ |
| dwc_ddrphy_apb_wr(0x2200fa, 0x1); /* DWC_DDRPHYA_MASTER0_DfiFreqRatio_p2 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TristateModeCA::DisDynAdrTri_p0 to 0x1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=0, Memclk=800MHz, Programming TristateModeCA::DDR2TMode_p0 to 0x0 */ |
| dwc_ddrphy_apb_wr(0x20019, 0x5); /* DWC_DDRPHYA_MASTER0_TristateModeCA_p0 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TristateModeCA::DisDynAdrTri_p1 to 0x1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=1, Memclk=266MHz, Programming TristateModeCA::DDR2TMode_p1 to 0x0 */ |
| dwc_ddrphy_apb_wr(0x120019, 0x5); /* DWC_DDRPHYA_MASTER0_TristateModeCA_p1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TristateModeCA::DisDynAdrTri_p2 to 0x1 */ |
| /* [phyinit_C_initPhyConfig] Pstate=2, Memclk=166MHz, Programming TristateModeCA::DDR2TMode_p2 to 0x0 */ |
| dwc_ddrphy_apb_wr(0x220019, 0x5); /* DWC_DDRPHYA_MASTER0_TristateModeCA_p2 */ |
| /* [phyinit_C_initPhyConfig] Programming DfiFreqXlat* */ |
| dwc_ddrphy_apb_wr(0x200f0, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat0 */ |
| dwc_ddrphy_apb_wr(0x200f1, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat1 */ |
| dwc_ddrphy_apb_wr(0x200f2, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat2 */ |
| dwc_ddrphy_apb_wr(0x200f3, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat3 */ |
| dwc_ddrphy_apb_wr(0x200f4, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat4 */ |
| dwc_ddrphy_apb_wr(0x200f5, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat5 */ |
| dwc_ddrphy_apb_wr(0x200f6, 0x5555); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat6 */ |
| dwc_ddrphy_apb_wr(0x200f7, 0xf000); /* DWC_DDRPHYA_MASTER0_DfiFreqXlat7 */ |
| /* [phyinit_C_initPhyConfig] Programming MasterX4Config::X4TG to 0x0 */ |
| dwc_ddrphy_apb_wr(0x20025, 0x0); /* DWC_DDRPHYA_MASTER0_MasterX4Config */ |
| /* [phyinit_C_initPhyConfig] End of dwc_ddrphy_phyinit_C_initPhyConfig() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* dwc_ddrphy_phyihunit_userCustom_customPreTrain is a user-editable function. */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* [phyinit_userCustom_customPreTrain] Start of dwc_ddrphy_phyinit_userCustom_customPreTrain() */ |
| /* [phyinit_userCustom_customPreTrain] End of dwc_ddrphy_phyinit_userCustom_customPreTrain() */ |
| /* [dwc_ddrphy_phyinit_D_loadIMEM, 1D] Start of dwc_ddrphy_phyinit_D_loadIMEM (Train2D=0) */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (D) Load the 1D IMEM image */ |
| /* */ |
| /* This function loads the training firmware IMEM image into the SRAM. */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* [dwc_ddrphy_phyinit_D_loadIMEM, 1D] Programming MemResetL to 0x2 */ |
| if (!after_retention) { |
| dwc_ddrphy_apb_wr(0x20060, 0x2); |
| |
| /* [dwc_ddrphy_phyinit_storeIncvFile] Reading input file: ../../../../firmware/A-2017.09/ddr3/ddr3_pmu_train_imem.incv */ |
| |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| /* This allows the memory controller unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [dwc_ddrphy_phyinit_WriteOutMem] STARTING. offset 0x50000 size 0x4000 */ |
| /* [dwc_ddrphy_phyinit_WriteOutMem] DONE. Index 0x4000 */ |
| /* 2. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| /* This allows the firmware unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [dwc_ddrphy_phyinit_D_loadIMEM, 1D] End of dwc_ddrphy_phyinit_D_loadIMEM() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* Step (E) Set the PHY input clocks to the desired frequency for pstate 0 */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| dwc_ddrphy_phyinit_userCustom_E_setDfiClk (0); |
| |
| /* */ |
| /* [dwc_ddrphy_phyinit_userCustom_E_setDfiClk] End of dwc_ddrphy_phyinit_userCustom_E_setDfiClk() */ |
| /* [phyinit_F_loadDMEM, 1D] Start of dwc_ddrphy_phyinit_F_loadDMEM (pstate=0, Train2D=0) */ |
| |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* for test on silicon, load 1D dmem/imem here */ |
| #ifdef CONFIG_SPL_VSI_FW_LOADING |
| load_train_1d_code(); |
| #else |
| ddr_load_train_code(FW_1D_IMAGE); |
| #endif |
| ddr_dbg("start 1d train\n"); |
| |
| |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (F) Load the 1D DMEM image and write the 1D Message Block parameters for the training firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* [dwc_ddrphy_phyinit_storeIncvFile] Reading input file: ../../../../firmware/A-2017.09/ddr3/ddr3_pmu_train_dmem.incv */ |
| |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| /* This allows the memory controller unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [dwc_ddrphy_phyinit_WriteOutMem] STARTING. offset 0x54000 size 0x36a */ |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x54000, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54000, 0x600); |
| #endif |
| dwc_ddrphy_apb_wr(0x54001, 0x0); |
| dwc_ddrphy_apb_wr(0x54002, 0x0); |
| dwc_ddrphy_apb_wr(0x54003, 0x640); |
| dwc_ddrphy_apb_wr(0x54004, 0x2); |
| dwc_ddrphy_apb_wr(0x54005, 0x0); |
| dwc_ddrphy_apb_wr(0x54006, 0x140); |
| dwc_ddrphy_apb_wr(0x54007, 0x2000); |
| #ifdef DDR_ONE_RANK |
| dwc_ddrphy_apb_wr(0x54008, 0x101); |
| dwc_ddrphy_apb_wr(0x54009, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54008, 0x303); |
| dwc_ddrphy_apb_wr(0x54009, 0x200); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400a, 0x0); |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x5400b, 0x31f); |
| #else |
| dwc_ddrphy_apb_wr(0x5400b, 0x1); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400c, 0xc8); |
| dwc_ddrphy_apb_wr(0x5400d, 0x0); |
| dwc_ddrphy_apb_wr(0x5400e, 0x0); |
| dwc_ddrphy_apb_wr(0x5400f, 0x0); |
| dwc_ddrphy_apb_wr(0x54010, 0x0); |
| dwc_ddrphy_apb_wr(0x54011, 0x0); |
| dwc_ddrphy_apb_wr(0x54012, 0x1); |
| dwc_ddrphy_apb_wr(0x5402f, 0xd70); |
| dwc_ddrphy_apb_wr(0x54030, 0x4); |
| dwc_ddrphy_apb_wr(0x54031, 0x18); |
| dwc_ddrphy_apb_wr(0x5403a, 0x1221); |
| dwc_ddrphy_apb_wr(0x5403b, 0x4884); |
| /* [dwc_ddrphy_phyinit_WriteOutMem] DONE. Index 0x36a */ |
| /* 2. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| /* This allows the firmware unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [phyinit_F_loadDMEM, 1D] End of dwc_ddrphy_phyinit_F_loadDMEM() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (G) Execute the Training Firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Reset the firmware microcontroller by writing the MicroReset CSR to set the StallToMicro and */ |
| /* ResetToMicro fields to 1 (all other fields should be zero). */ |
| /* Then rewrite the CSR so that only the StallToMicro remains set (all other fields should be zero). */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x9); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 2. Begin execution of the training firmware by setting the MicroReset CSR to 4'b0000. */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 3. Wait for the training firmware to complete by following the procedure in "uCtrl Initialization and Mailbox Messaging" */ |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] Wait for the training firmware to complete. Implement timeout fucntion or follow the procedure in "3.4 Running the firmware" of the Training Firmware Application Note to poll the Mailbox message. */ |
| dwc_ddrphy_phyinit_userCustom_G_waitFwDone (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] End of dwc_ddrphy_phyinit_userCustom_G_waitFwDone() */ |
| /* 4. Halt the microcontroller." */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* [dwc_ddrphy_phyinit_G_execFW] End of dwc_ddrphy_phyinit_G_execFW () */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (H) Read the Message Block results */ |
| /* */ |
| /* The procedure is as follows: */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* */ |
| /* 2. Read the Firmware Message Block to obtain the results from the training. */ |
| /* This can be accomplished by issuing APB read commands to the DMEM addresses. */ |
| /* Example: */ |
| /* if (Train2D) */ |
| /* { */ |
| /* _read_2d_message_block_outputs_ */ |
| /* } */ |
| /* else */ |
| /* { */ |
| /* _read_1d_message_block_outputs_ */ |
| /* } */ |
| dwc_ddrphy_phyinit_userCustom_H_readMsgBlock (0); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_H_readMsgBlock] End of dwc_ddrphy_phyinit_userCustom_H_readMsgBlock () */ |
| /* 3. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* 4. If training is required at another frequency, repeat the operations starting at step (E). */ |
| /* [dwc_ddrphy_phyinit_H_readMsgBlock] End of dwc_ddrphy_phyinit_H_readMsgBlock() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* Step (E) Set the PHY input clocks to the desired frequency for pstate 1 */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| #ifdef DDR3_SW_FFC |
| dwc_ddrphy_phyinit_userCustom_E_setDfiClk (1); |
| |
| /* */ |
| /* [dwc_ddrphy_phyinit_userCustom_E_setDfiClk] End of dwc_ddrphy_phyinit_userCustom_E_setDfiClk() */ |
| /* [phyinit_F_loadDMEM, 1D] Start of dwc_ddrphy_phyinit_F_loadDMEM (pstate=1, Train2D=0) */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (F) Load the 1D DMEM image and write the 1D Message Block parameters for the training firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* [dwc_ddrphy_phyinit_storeIncvFile] Reading input file: ../../../../firmware/A-2017.09/ddr3/ddr3_pmu_train_dmem.incv */ |
| |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| /* This allows the memory controller unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [dwc_ddrphy_phyinit_WriteOutMem] STARTING. offset 0x54000 size 0x36a */ |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x54000, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54000, 0x600); |
| #endif |
| dwc_ddrphy_apb_wr(0x54001, 0x0); |
| dwc_ddrphy_apb_wr(0x54002, 0x1); |
| dwc_ddrphy_apb_wr(0x54003, 0x214); |
| dwc_ddrphy_apb_wr(0x54004, 0x2); |
| dwc_ddrphy_apb_wr(0x54005, 0x0); |
| dwc_ddrphy_apb_wr(0x54006, 0x140); |
| dwc_ddrphy_apb_wr(0x54007, 0x2000); |
| #ifdef DDR_ONE_RANK |
| dwc_ddrphy_apb_wr(0x54008, 0x101); |
| dwc_ddrphy_apb_wr(0x54009, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54008, 0x303); |
| dwc_ddrphy_apb_wr(0x54009, 0x200); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400a, 0x0); |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x5400b, 0x21f); |
| #else |
| dwc_ddrphy_apb_wr(0x5400b, 0x1); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400c, 0xc8); |
| dwc_ddrphy_apb_wr(0x5400d, 0x0); |
| dwc_ddrphy_apb_wr(0x5400e, 0x0); |
| dwc_ddrphy_apb_wr(0x5400f, 0x0); |
| dwc_ddrphy_apb_wr(0x54010, 0x0); |
| dwc_ddrphy_apb_wr(0x54011, 0x0); |
| dwc_ddrphy_apb_wr(0x54012, 0x1); |
| dwc_ddrphy_apb_wr(0x5402f, 0x930); |
| dwc_ddrphy_apb_wr(0x54030, 0x4); |
| dwc_ddrphy_apb_wr(0x54031, 0x8); |
| dwc_ddrphy_apb_wr(0x5403a, 0x1221); |
| dwc_ddrphy_apb_wr(0x5403b, 0x4884); |
| /* [dwc_ddrphy_phyinit_WriteOutMem] DONE. Index 0x36a */ |
| /* 2. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| /* This allows the firmware unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [phyinit_F_loadDMEM, 1D] End of dwc_ddrphy_phyinit_F_loadDMEM() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (G) Execute the Training Firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Reset the firmware microcontroller by writing the MicroReset CSR to set the StallToMicro and */ |
| /* ResetToMicro fields to 1 (all other fields should be zero). */ |
| /* Then rewrite the CSR so that only the StallToMicro remains set (all other fields should be zero). */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x9); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 2. Begin execution of the training firmware by setting the MicroReset CSR to 4'b0000. */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 3. Wait for the training firmware to complete by following the procedure in "uCtrl Initialization and Mailbox Messaging" */ |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] Wait for the training firmware to complete. Implement timeout fucntion or follow the procedure in "3.4 Running the firmware" of the Training Firmware Application Note to poll the Mailbox message. */ |
| dwc_ddrphy_phyinit_userCustom_G_waitFwDone (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] End of dwc_ddrphy_phyinit_userCustom_G_waitFwDone() */ |
| /* 4. Halt the microcontroller." */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* [dwc_ddrphy_phyinit_G_execFW] End of dwc_ddrphy_phyinit_G_execFW () */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (H) Read the Message Block results */ |
| /* */ |
| /* The procedure is as follows: */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* */ |
| /* 2. Read the Firmware Message Block to obtain the results from the training. */ |
| /* This can be accomplished by issuing APB read commands to the DMEM addresses. */ |
| /* Example: */ |
| /* if (Train2D) */ |
| /* { */ |
| /* _read_2d_message_block_outputs_ */ |
| /* } */ |
| /* else */ |
| /* { */ |
| /* _read_1d_message_block_outputs_ */ |
| /* } */ |
| dwc_ddrphy_phyinit_userCustom_H_readMsgBlock (0); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_H_readMsgBlock] End of dwc_ddrphy_phyinit_userCustom_H_readMsgBlock () */ |
| /* 3. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* 4. If training is required at another frequency, repeat the operations starting at step (E). */ |
| /* [dwc_ddrphy_phyinit_H_readMsgBlock] End of dwc_ddrphy_phyinit_H_readMsgBlock() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* Step (E) Set the PHY input clocks to the desired frequency for pstate 2 */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| dwc_ddrphy_phyinit_userCustom_E_setDfiClk (2); |
| |
| /* */ |
| /* [dwc_ddrphy_phyinit_userCustom_E_setDfiClk] End of dwc_ddrphy_phyinit_userCustom_E_setDfiClk() */ |
| /* [phyinit_F_loadDMEM, 1D] Start of dwc_ddrphy_phyinit_F_loadDMEM (pstate=2, Train2D=0) */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (F) Load the 1D DMEM image and write the 1D Message Block parameters for the training firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* [dwc_ddrphy_phyinit_storeIncvFile] Reading input file: ../../../../firmware/A-2017.09/ddr3/ddr3_pmu_train_dmem.incv */ |
| |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| /* This allows the memory controller unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [dwc_ddrphy_phyinit_WriteOutMem] STARTING. offset 0x54000 size 0x36a */ |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x54000, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54000, 0x600); |
| #endif |
| dwc_ddrphy_apb_wr(0x54001, 0x0); |
| dwc_ddrphy_apb_wr(0x54002, 0x2); |
| dwc_ddrphy_apb_wr(0x54003, 0x14c); |
| dwc_ddrphy_apb_wr(0x54004, 0x2); |
| dwc_ddrphy_apb_wr(0x54005, 0x0); |
| dwc_ddrphy_apb_wr(0x54006, 0x140); |
| dwc_ddrphy_apb_wr(0x54007, 0x2000); |
| #ifdef DDR_ONE_RANK |
| dwc_ddrphy_apb_wr(0x54008, 0x101); |
| dwc_ddrphy_apb_wr(0x54009, 0x0); |
| #else |
| dwc_ddrphy_apb_wr(0x54008, 0x303); |
| dwc_ddrphy_apb_wr(0x54009, 0x200); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400a, 0x0); |
| #ifdef RUN_ON_SILICON |
| dwc_ddrphy_apb_wr(0x5400b, 0x21f); |
| #else |
| dwc_ddrphy_apb_wr(0x5400b, 0x1); |
| #endif |
| dwc_ddrphy_apb_wr(0x5400c, 0xc8); |
| dwc_ddrphy_apb_wr(0x5400d, 0x0); |
| dwc_ddrphy_apb_wr(0x5400e, 0x0); |
| dwc_ddrphy_apb_wr(0x5400f, 0x0); |
| dwc_ddrphy_apb_wr(0x54010, 0x0); |
| dwc_ddrphy_apb_wr(0x54011, 0x0); |
| dwc_ddrphy_apb_wr(0x54012, 0x1); |
| dwc_ddrphy_apb_wr(0x5402f, 0x520); |
| dwc_ddrphy_apb_wr(0x54030, 0x4); |
| dwc_ddrphy_apb_wr(0x54031, 0x0); |
| dwc_ddrphy_apb_wr(0x5403a, 0x1221); |
| dwc_ddrphy_apb_wr(0x5403b, 0x4884); |
| /* [dwc_ddrphy_phyinit_WriteOutMem] DONE. Index 0x36a */ |
| /* 2. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| /* This allows the firmware unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [phyinit_F_loadDMEM, 1D] End of dwc_ddrphy_phyinit_F_loadDMEM() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (G) Execute the Training Firmware */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Reset the firmware microcontroller by writing the MicroReset CSR to set the StallToMicro and */ |
| /* ResetToMicro fields to 1 (all other fields should be zero). */ |
| /* Then rewrite the CSR so that only the StallToMicro remains set (all other fields should be zero). */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x9); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 2. Begin execution of the training firmware by setting the MicroReset CSR to 4'b0000. */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* */ |
| /* 3. Wait for the training firmware to complete by following the procedure in "uCtrl Initialization and Mailbox Messaging" */ |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] Wait for the training firmware to complete. Implement timeout fucntion or follow the procedure in "3.4 Running the firmware" of the Training Firmware Application Note to poll the Mailbox message. */ |
| dwc_ddrphy_phyinit_userCustom_G_waitFwDone (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_G_waitFwDone] End of dwc_ddrphy_phyinit_userCustom_G_waitFwDone() */ |
| /* 4. Halt the microcontroller." */ |
| dwc_ddrphy_apb_wr(0xd0099, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroReset */ |
| /* [dwc_ddrphy_phyinit_G_execFW] End of dwc_ddrphy_phyinit_G_execFW () */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (H) Read the Message Block results */ |
| /* */ |
| /* The procedure is as follows: */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* 1. Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* */ |
| /* 2. Read the Firmware Message Block to obtain the results from the training. */ |
| /* This can be accomplished by issuing APB read commands to the DMEM addresses. */ |
| /* Example: */ |
| /* if (Train2D) */ |
| /* { */ |
| /* _read_2d_message_block_outputs_ */ |
| /* } */ |
| /* else */ |
| /* { */ |
| /* _read_1d_message_block_outputs_ */ |
| /* } */ |
| dwc_ddrphy_phyinit_userCustom_H_readMsgBlock (0); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_H_readMsgBlock] End of dwc_ddrphy_phyinit_userCustom_H_readMsgBlock () */ |
| /* 3. Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* 4. If training is required at another frequency, repeat the operations starting at step (E). */ |
| /* [dwc_ddrphy_phyinit_H_readMsgBlock] End of dwc_ddrphy_phyinit_H_readMsgBlock() */ |
| /* [phyinit_I_loadPIEImage] Start of dwc_ddrphy_phyinit_I_loadPIEImage() */ |
| #endif /* DDR3_SW_FFC */ |
| ddr_dbg("1D training done!!!!\n"); |
| } /* !after_retention */else {/* after_retention */ |
| /* restore_1d2d_trained_csr_ddr3_p0(SAVE_DDRPHY_TRAIN_ADDR); */ |
| restore_1d2d_trained_csr_ddr3_p012(SAVE_DDRPHY_TRAIN_ADDR); |
| } /* after_retention */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (I) Load PHY Init Engine Image */ |
| /* */ |
| /* Load the PHY Initialization Engine memory with the provided initialization sequence. */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* */ |
| /* Enable access to the internal CSRs by setting the MicroContMuxSel CSR to 0. */ |
| /* This allows the memory controller unrestricted access to the configuration CSRs. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [phyinit_I_loadPIEImage] Programming PIE Production Code */ |
| dwc_ddrphy_apb_wr(0x90000, 0x10); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b0s0 */ |
| dwc_ddrphy_apb_wr(0x90001, 0x400); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b0s1 */ |
| dwc_ddrphy_apb_wr(0x90002, 0x10e); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b0s2 */ |
| dwc_ddrphy_apb_wr(0x90003, 0x0); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b1s0 */ |
| dwc_ddrphy_apb_wr(0x90004, 0x0); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b1s1 */ |
| dwc_ddrphy_apb_wr(0x90005, 0x8); /* DWC_DDRPHYA_INITENG0_PreSequenceReg0b1s2 */ |
| dwc_ddrphy_apb_wr(0x90029, 0xb); /* DWC_DDRPHYA_INITENG0_SequenceReg0b0s0 */ |
| dwc_ddrphy_apb_wr(0x9002a, 0x480); /* DWC_DDRPHYA_INITENG0_SequenceReg0b0s1 */ |
| dwc_ddrphy_apb_wr(0x9002b, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b0s2 */ |
| dwc_ddrphy_apb_wr(0x9002c, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b1s0 */ |
| dwc_ddrphy_apb_wr(0x9002d, 0x448); /* DWC_DDRPHYA_INITENG0_SequenceReg0b1s1 */ |
| dwc_ddrphy_apb_wr(0x9002e, 0x139); /* DWC_DDRPHYA_INITENG0_SequenceReg0b1s2 */ |
| dwc_ddrphy_apb_wr(0x9002f, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b2s0 */ |
| dwc_ddrphy_apb_wr(0x90030, 0x478); /* DWC_DDRPHYA_INITENG0_SequenceReg0b2s1 */ |
| dwc_ddrphy_apb_wr(0x90031, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b2s2 */ |
| dwc_ddrphy_apb_wr(0x90032, 0x2); /* DWC_DDRPHYA_INITENG0_SequenceReg0b3s0 */ |
| dwc_ddrphy_apb_wr(0x90033, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b3s1 */ |
| dwc_ddrphy_apb_wr(0x90034, 0x139); /* DWC_DDRPHYA_INITENG0_SequenceReg0b3s2 */ |
| dwc_ddrphy_apb_wr(0x90035, 0xf); /* DWC_DDRPHYA_INITENG0_SequenceReg0b4s0 */ |
| dwc_ddrphy_apb_wr(0x90036, 0x7c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b4s1 */ |
| dwc_ddrphy_apb_wr(0x90037, 0x139); /* DWC_DDRPHYA_INITENG0_SequenceReg0b4s2 */ |
| dwc_ddrphy_apb_wr(0x90038, 0x44); /* DWC_DDRPHYA_INITENG0_SequenceReg0b5s0 */ |
| dwc_ddrphy_apb_wr(0x90039, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b5s1 */ |
| dwc_ddrphy_apb_wr(0x9003a, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b5s2 */ |
| dwc_ddrphy_apb_wr(0x9003b, 0x14f); /* DWC_DDRPHYA_INITENG0_SequenceReg0b6s0 */ |
| dwc_ddrphy_apb_wr(0x9003c, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b6s1 */ |
| dwc_ddrphy_apb_wr(0x9003d, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b6s2 */ |
| dwc_ddrphy_apb_wr(0x9003e, 0x47); /* DWC_DDRPHYA_INITENG0_SequenceReg0b7s0 */ |
| dwc_ddrphy_apb_wr(0x9003f, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b7s1 */ |
| dwc_ddrphy_apb_wr(0x90040, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b7s2 */ |
| dwc_ddrphy_apb_wr(0x90041, 0x4f); /* DWC_DDRPHYA_INITENG0_SequenceReg0b8s0 */ |
| dwc_ddrphy_apb_wr(0x90042, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b8s1 */ |
| dwc_ddrphy_apb_wr(0x90043, 0x179); /* DWC_DDRPHYA_INITENG0_SequenceReg0b8s2 */ |
| dwc_ddrphy_apb_wr(0x90044, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b9s0 */ |
| dwc_ddrphy_apb_wr(0x90045, 0xe0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b9s1 */ |
| dwc_ddrphy_apb_wr(0x90046, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b9s2 */ |
| dwc_ddrphy_apb_wr(0x90047, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b10s0 */ |
| dwc_ddrphy_apb_wr(0x90048, 0x7c8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b10s1 */ |
| dwc_ddrphy_apb_wr(0x90049, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b10s2 */ |
| dwc_ddrphy_apb_wr(0x9004a, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b11s0 */ |
| dwc_ddrphy_apb_wr(0x9004b, 0x1); /* DWC_DDRPHYA_INITENG0_SequenceReg0b11s1 */ |
| dwc_ddrphy_apb_wr(0x9004c, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b11s2 */ |
| dwc_ddrphy_apb_wr(0x9004d, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b12s0 */ |
| dwc_ddrphy_apb_wr(0x9004e, 0x45a); /* DWC_DDRPHYA_INITENG0_SequenceReg0b12s1 */ |
| dwc_ddrphy_apb_wr(0x9004f, 0x9); /* DWC_DDRPHYA_INITENG0_SequenceReg0b12s2 */ |
| dwc_ddrphy_apb_wr(0x90050, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b13s0 */ |
| dwc_ddrphy_apb_wr(0x90051, 0x448); /* DWC_DDRPHYA_INITENG0_SequenceReg0b13s1 */ |
| dwc_ddrphy_apb_wr(0x90052, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b13s2 */ |
| dwc_ddrphy_apb_wr(0x90053, 0x40); /* DWC_DDRPHYA_INITENG0_SequenceReg0b14s0 */ |
| dwc_ddrphy_apb_wr(0x90054, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b14s1 */ |
| dwc_ddrphy_apb_wr(0x90055, 0x179); /* DWC_DDRPHYA_INITENG0_SequenceReg0b14s2 */ |
| dwc_ddrphy_apb_wr(0x90056, 0x1); /* DWC_DDRPHYA_INITENG0_SequenceReg0b15s0 */ |
| dwc_ddrphy_apb_wr(0x90057, 0x618); /* DWC_DDRPHYA_INITENG0_SequenceReg0b15s1 */ |
| dwc_ddrphy_apb_wr(0x90058, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b15s2 */ |
| dwc_ddrphy_apb_wr(0x90059, 0x40c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b16s0 */ |
| dwc_ddrphy_apb_wr(0x9005a, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b16s1 */ |
| dwc_ddrphy_apb_wr(0x9005b, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b16s2 */ |
| dwc_ddrphy_apb_wr(0x9005c, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b17s0 */ |
| dwc_ddrphy_apb_wr(0x9005d, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b17s1 */ |
| dwc_ddrphy_apb_wr(0x9005e, 0x48); /* DWC_DDRPHYA_INITENG0_SequenceReg0b17s2 */ |
| dwc_ddrphy_apb_wr(0x9005f, 0x4040); /* DWC_DDRPHYA_INITENG0_SequenceReg0b18s0 */ |
| dwc_ddrphy_apb_wr(0x90060, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b18s1 */ |
| dwc_ddrphy_apb_wr(0x90061, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b18s2 */ |
| dwc_ddrphy_apb_wr(0x90062, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b19s0 */ |
| dwc_ddrphy_apb_wr(0x90063, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b19s1 */ |
| dwc_ddrphy_apb_wr(0x90064, 0x48); /* DWC_DDRPHYA_INITENG0_SequenceReg0b19s2 */ |
| dwc_ddrphy_apb_wr(0x90065, 0x40); /* DWC_DDRPHYA_INITENG0_SequenceReg0b20s0 */ |
| dwc_ddrphy_apb_wr(0x90066, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b20s1 */ |
| dwc_ddrphy_apb_wr(0x90067, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b20s2 */ |
| dwc_ddrphy_apb_wr(0x90068, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b21s0 */ |
| dwc_ddrphy_apb_wr(0x90069, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b21s1 */ |
| dwc_ddrphy_apb_wr(0x9006a, 0x18); /* DWC_DDRPHYA_INITENG0_SequenceReg0b21s2 */ |
| dwc_ddrphy_apb_wr(0x9006b, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b22s0 */ |
| dwc_ddrphy_apb_wr(0x9006c, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b22s1 */ |
| dwc_ddrphy_apb_wr(0x9006d, 0x78); /* DWC_DDRPHYA_INITENG0_SequenceReg0b22s2 */ |
| dwc_ddrphy_apb_wr(0x9006e, 0x549); /* DWC_DDRPHYA_INITENG0_SequenceReg0b23s0 */ |
| dwc_ddrphy_apb_wr(0x9006f, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b23s1 */ |
| dwc_ddrphy_apb_wr(0x90070, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b23s2 */ |
| dwc_ddrphy_apb_wr(0x90071, 0xd49); /* DWC_DDRPHYA_INITENG0_SequenceReg0b24s0 */ |
| dwc_ddrphy_apb_wr(0x90072, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b24s1 */ |
| dwc_ddrphy_apb_wr(0x90073, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b24s2 */ |
| dwc_ddrphy_apb_wr(0x90074, 0x94a); /* DWC_DDRPHYA_INITENG0_SequenceReg0b25s0 */ |
| dwc_ddrphy_apb_wr(0x90075, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b25s1 */ |
| dwc_ddrphy_apb_wr(0x90076, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b25s2 */ |
| dwc_ddrphy_apb_wr(0x90077, 0x441); /* DWC_DDRPHYA_INITENG0_SequenceReg0b26s0 */ |
| dwc_ddrphy_apb_wr(0x90078, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b26s1 */ |
| dwc_ddrphy_apb_wr(0x90079, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b26s2 */ |
| dwc_ddrphy_apb_wr(0x9007a, 0x42); /* DWC_DDRPHYA_INITENG0_SequenceReg0b27s0 */ |
| dwc_ddrphy_apb_wr(0x9007b, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b27s1 */ |
| dwc_ddrphy_apb_wr(0x9007c, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b27s2 */ |
| dwc_ddrphy_apb_wr(0x9007d, 0x1); /* DWC_DDRPHYA_INITENG0_SequenceReg0b28s0 */ |
| dwc_ddrphy_apb_wr(0x9007e, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b28s1 */ |
| dwc_ddrphy_apb_wr(0x9007f, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b28s2 */ |
| dwc_ddrphy_apb_wr(0x90080, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b29s0 */ |
| dwc_ddrphy_apb_wr(0x90081, 0xe0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b29s1 */ |
| dwc_ddrphy_apb_wr(0x90082, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b29s2 */ |
| dwc_ddrphy_apb_wr(0x90083, 0xa); /* DWC_DDRPHYA_INITENG0_SequenceReg0b30s0 */ |
| dwc_ddrphy_apb_wr(0x90084, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b30s1 */ |
| dwc_ddrphy_apb_wr(0x90085, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b30s2 */ |
| dwc_ddrphy_apb_wr(0x90086, 0x9); /* DWC_DDRPHYA_INITENG0_SequenceReg0b31s0 */ |
| dwc_ddrphy_apb_wr(0x90087, 0x3c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b31s1 */ |
| dwc_ddrphy_apb_wr(0x90088, 0x149); /* DWC_DDRPHYA_INITENG0_SequenceReg0b31s2 */ |
| dwc_ddrphy_apb_wr(0x90089, 0x9); /* DWC_DDRPHYA_INITENG0_SequenceReg0b32s0 */ |
| dwc_ddrphy_apb_wr(0x9008a, 0x3c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b32s1 */ |
| dwc_ddrphy_apb_wr(0x9008b, 0x159); /* DWC_DDRPHYA_INITENG0_SequenceReg0b32s2 */ |
| dwc_ddrphy_apb_wr(0x9008c, 0x18); /* DWC_DDRPHYA_INITENG0_SequenceReg0b33s0 */ |
| dwc_ddrphy_apb_wr(0x9008d, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b33s1 */ |
| dwc_ddrphy_apb_wr(0x9008e, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b33s2 */ |
| dwc_ddrphy_apb_wr(0x9008f, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b34s0 */ |
| dwc_ddrphy_apb_wr(0x90090, 0x3c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b34s1 */ |
| dwc_ddrphy_apb_wr(0x90091, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b34s2 */ |
| dwc_ddrphy_apb_wr(0x90092, 0x18); /* DWC_DDRPHYA_INITENG0_SequenceReg0b35s0 */ |
| dwc_ddrphy_apb_wr(0x90093, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b35s1 */ |
| dwc_ddrphy_apb_wr(0x90094, 0x48); /* DWC_DDRPHYA_INITENG0_SequenceReg0b35s2 */ |
| dwc_ddrphy_apb_wr(0x90095, 0x18); /* DWC_DDRPHYA_INITENG0_SequenceReg0b36s0 */ |
| dwc_ddrphy_apb_wr(0x90096, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b36s1 */ |
| dwc_ddrphy_apb_wr(0x90097, 0x58); /* DWC_DDRPHYA_INITENG0_SequenceReg0b36s2 */ |
| dwc_ddrphy_apb_wr(0x90098, 0xa); /* DWC_DDRPHYA_INITENG0_SequenceReg0b37s0 */ |
| dwc_ddrphy_apb_wr(0x90099, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b37s1 */ |
| dwc_ddrphy_apb_wr(0x9009a, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b37s2 */ |
| dwc_ddrphy_apb_wr(0x9009b, 0x2); /* DWC_DDRPHYA_INITENG0_SequenceReg0b38s0 */ |
| dwc_ddrphy_apb_wr(0x9009c, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b38s1 */ |
| dwc_ddrphy_apb_wr(0x9009d, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b38s2 */ |
| dwc_ddrphy_apb_wr(0x9009e, 0x7); /* DWC_DDRPHYA_INITENG0_SequenceReg0b39s0 */ |
| dwc_ddrphy_apb_wr(0x9009f, 0x7c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b39s1 */ |
| dwc_ddrphy_apb_wr(0x900a0, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b39s2 */ |
| dwc_ddrphy_apb_wr(0x900a1, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b40s0 */ |
| dwc_ddrphy_apb_wr(0x900a2, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b40s1 */ |
| dwc_ddrphy_apb_wr(0x900a3, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b40s2 */ |
| dwc_ddrphy_apb_wr(0x900a4, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b41s0 */ |
| dwc_ddrphy_apb_wr(0x900a5, 0x8140); /* DWC_DDRPHYA_INITENG0_SequenceReg0b41s1 */ |
| dwc_ddrphy_apb_wr(0x900a6, 0x10c); /* DWC_DDRPHYA_INITENG0_SequenceReg0b41s2 */ |
| dwc_ddrphy_apb_wr(0x900a7, 0x10); /* DWC_DDRPHYA_INITENG0_SequenceReg0b42s0 */ |
| dwc_ddrphy_apb_wr(0x900a8, 0x8138); /* DWC_DDRPHYA_INITENG0_SequenceReg0b42s1 */ |
| dwc_ddrphy_apb_wr(0x900a9, 0x10c); /* DWC_DDRPHYA_INITENG0_SequenceReg0b42s2 */ |
| dwc_ddrphy_apb_wr(0x900aa, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b43s0 */ |
| dwc_ddrphy_apb_wr(0x900ab, 0x7c8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b43s1 */ |
| dwc_ddrphy_apb_wr(0x900ac, 0x101); /* DWC_DDRPHYA_INITENG0_SequenceReg0b43s2 */ |
| dwc_ddrphy_apb_wr(0x900ad, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b44s0 */ |
| dwc_ddrphy_apb_wr(0x900ae, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b44s1 */ |
| dwc_ddrphy_apb_wr(0x900af, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b44s2 */ |
| dwc_ddrphy_apb_wr(0x900b0, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b45s0 */ |
| dwc_ddrphy_apb_wr(0x900b1, 0x448); /* DWC_DDRPHYA_INITENG0_SequenceReg0b45s1 */ |
| dwc_ddrphy_apb_wr(0x900b2, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b45s2 */ |
| dwc_ddrphy_apb_wr(0x900b3, 0xf); /* DWC_DDRPHYA_INITENG0_SequenceReg0b46s0 */ |
| dwc_ddrphy_apb_wr(0x900b4, 0x7c0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b46s1 */ |
| dwc_ddrphy_apb_wr(0x900b5, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b46s2 */ |
| dwc_ddrphy_apb_wr(0x900b6, 0x47); /* DWC_DDRPHYA_INITENG0_SequenceReg0b47s0 */ |
| dwc_ddrphy_apb_wr(0x900b7, 0x630); /* DWC_DDRPHYA_INITENG0_SequenceReg0b47s1 */ |
| dwc_ddrphy_apb_wr(0x900b8, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b47s2 */ |
| dwc_ddrphy_apb_wr(0x900b9, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b48s0 */ |
| dwc_ddrphy_apb_wr(0x900ba, 0x618); /* DWC_DDRPHYA_INITENG0_SequenceReg0b48s1 */ |
| dwc_ddrphy_apb_wr(0x900bb, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b48s2 */ |
| dwc_ddrphy_apb_wr(0x900bc, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b49s0 */ |
| dwc_ddrphy_apb_wr(0x900bd, 0xe0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b49s1 */ |
| dwc_ddrphy_apb_wr(0x900be, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b49s2 */ |
| dwc_ddrphy_apb_wr(0x900bf, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b50s0 */ |
| dwc_ddrphy_apb_wr(0x900c0, 0x7c8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b50s1 */ |
| dwc_ddrphy_apb_wr(0x900c1, 0x109); /* DWC_DDRPHYA_INITENG0_SequenceReg0b50s2 */ |
| dwc_ddrphy_apb_wr(0x900c2, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b51s0 */ |
| dwc_ddrphy_apb_wr(0x900c3, 0x8140); /* DWC_DDRPHYA_INITENG0_SequenceReg0b51s1 */ |
| dwc_ddrphy_apb_wr(0x900c4, 0x10c); /* DWC_DDRPHYA_INITENG0_SequenceReg0b51s2 */ |
| dwc_ddrphy_apb_wr(0x900c5, 0x0); /* DWC_DDRPHYA_INITENG0_SequenceReg0b52s0 */ |
| dwc_ddrphy_apb_wr(0x900c6, 0x1); /* DWC_DDRPHYA_INITENG0_SequenceReg0b52s1 */ |
| dwc_ddrphy_apb_wr(0x900c7, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b52s2 */ |
| dwc_ddrphy_apb_wr(0x900c8, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b53s0 */ |
| dwc_ddrphy_apb_wr(0x900c9, 0x4); /* DWC_DDRPHYA_INITENG0_SequenceReg0b53s1 */ |
| dwc_ddrphy_apb_wr(0x900ca, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b53s2 */ |
| dwc_ddrphy_apb_wr(0x900cb, 0x8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b54s0 */ |
| dwc_ddrphy_apb_wr(0x900cc, 0x7c8); /* DWC_DDRPHYA_INITENG0_SequenceReg0b54s1 */ |
| dwc_ddrphy_apb_wr(0x900cd, 0x101); /* DWC_DDRPHYA_INITENG0_SequenceReg0b54s2 */ |
| dwc_ddrphy_apb_wr(0x90006, 0x0); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b0s0 */ |
| dwc_ddrphy_apb_wr(0x90007, 0x0); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b0s1 */ |
| dwc_ddrphy_apb_wr(0x90008, 0x8); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b0s2 */ |
| dwc_ddrphy_apb_wr(0x90009, 0x0); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b1s0 */ |
| dwc_ddrphy_apb_wr(0x9000a, 0x0); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b1s1 */ |
| dwc_ddrphy_apb_wr(0x9000b, 0x0); /* DWC_DDRPHYA_INITENG0_PostSequenceReg0b1s2 */ |
| dwc_ddrphy_apb_wr(0xd00e7, 0x400); /* DWC_DDRPHYA_APBONLY0_SequencerOverride */ |
| dwc_ddrphy_apb_wr(0x90017, 0x0); /* DWC_DDRPHYA_INITENG0_StartVector0b0 */ |
| dwc_ddrphy_apb_wr(0x90026, 0x2c); /* DWC_DDRPHYA_INITENG0_StartVector0b15 */ |
| /* [phyinit_I_loadPIEImage] Pstate=0, Memclk=800MHz, Programming Seq0BDLY0 to 0x32 */ |
| dwc_ddrphy_apb_wr(0x2000b, 0x32); /* DWC_DDRPHYA_MASTER0_Seq0BDLY0_p0 */ |
| /* [phyinit_I_loadPIEImage] Pstate=0, Memclk=800MHz, Programming Seq0BDLY1 to 0x64 */ |
| dwc_ddrphy_apb_wr(0x2000c, 0x64); /* DWC_DDRPHYA_MASTER0_Seq0BDLY1_p0 */ |
| /* [phyinit_I_loadPIEImage] Pstate=0, Memclk=800MHz, Programming Seq0BDLY2 to 0x3e8 */ |
| dwc_ddrphy_apb_wr(0x2000d, 0x3e8); /* DWC_DDRPHYA_MASTER0_Seq0BDLY2_p0 */ |
| /* [phyinit_I_loadPIEImage] Pstate=0, Memclk=800MHz, Programming Seq0BDLY3 to 0x2c */ |
| dwc_ddrphy_apb_wr(0x2000e, 0x2c); /* DWC_DDRPHYA_MASTER0_Seq0BDLY3_p0 */ |
| /* [phyinit_I_loadPIEImage] Pstate=1, Memclk=266MHz, Programming Seq0BDLY0 to 0x10 */ |
| dwc_ddrphy_apb_wr(0x12000b, 0x10); /* DWC_DDRPHYA_MASTER0_Seq0BDLY0_p1 */ |
| /* [phyinit_I_loadPIEImage] Pstate=1, Memclk=266MHz, Programming Seq0BDLY1 to 0x21 */ |
| dwc_ddrphy_apb_wr(0x12000c, 0x21); /* DWC_DDRPHYA_MASTER0_Seq0BDLY1_p1 */ |
| /* [phyinit_I_loadPIEImage] Pstate=1, Memclk=266MHz, Programming Seq0BDLY2 to 0x14c */ |
| dwc_ddrphy_apb_wr(0x12000d, 0x14c); /* DWC_DDRPHYA_MASTER0_Seq0BDLY2_p1 */ |
| /* [phyinit_I_loadPIEImage] Pstate=1, Memclk=266MHz, Programming Seq0BDLY3 to 0x10 */ |
| dwc_ddrphy_apb_wr(0x12000e, 0x10); /* DWC_DDRPHYA_MASTER0_Seq0BDLY3_p1 */ |
| /* [phyinit_I_loadPIEImage] Pstate=2, Memclk=166MHz, Programming Seq0BDLY0 to 0xa */ |
| dwc_ddrphy_apb_wr(0x22000b, 0xa); /* DWC_DDRPHYA_MASTER0_Seq0BDLY0_p2 */ |
| /* [phyinit_I_loadPIEImage] Pstate=2, Memclk=166MHz, Programming Seq0BDLY1 to 0x14 */ |
| dwc_ddrphy_apb_wr(0x22000c, 0x14); /* DWC_DDRPHYA_MASTER0_Seq0BDLY1_p2 */ |
| /* [phyinit_I_loadPIEImage] Pstate=2, Memclk=166MHz, Programming Seq0BDLY2 to 0xcf */ |
| dwc_ddrphy_apb_wr(0x22000d, 0xcf); /* DWC_DDRPHYA_MASTER0_Seq0BDLY2_p2 */ |
| /* [phyinit_I_loadPIEImage] Pstate=2, Memclk=166MHz, Programming Seq0BDLY3 to 0x10 */ |
| dwc_ddrphy_apb_wr(0x22000e, 0x10); /* DWC_DDRPHYA_MASTER0_Seq0BDLY3_p2 */ |
| dwc_ddrphy_apb_wr(0x9000c, 0x0); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag0 */ |
| dwc_ddrphy_apb_wr(0x9000d, 0x173); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag1 */ |
| dwc_ddrphy_apb_wr(0x9000e, 0x60); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag2 */ |
| dwc_ddrphy_apb_wr(0x9000f, 0x6110); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag3 */ |
| dwc_ddrphy_apb_wr(0x90010, 0x2152); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag4 */ |
| dwc_ddrphy_apb_wr(0x90011, 0xdfbd); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag5 */ |
| dwc_ddrphy_apb_wr(0x90012, 0xffff); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag6 */ |
| dwc_ddrphy_apb_wr(0x90013, 0x6152); /* DWC_DDRPHYA_INITENG0_Seq0BDisableFlag7 */ |
| /* Disabling Ucclk (PMU) and Hclk (training hardware) */ |
| dwc_ddrphy_apb_wr(0xc0080, 0x0); /* DWC_DDRPHYA_DRTUB0_UcclkHclkEnables */ |
| /* Isolate the APB access from the internal CSRs by setting the MicroContMuxSel CSR to 1. */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); /* DWC_DDRPHYA_APBONLY0_MicroContMuxSel */ |
| /* [phyinit_I_loadPIEImage] End of dwc_ddrphy_phyinit_I_loadPIEImage() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* dwc_ddrphy_phyinit_userCustom_customPostTrain is a user-editable function. */ |
| /* */ |
| /* See PhyInit App Note for detailed description and function usage */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| dwc_ddrphy_phyinit_userCustom_customPostTrain (); |
| |
| /* [dwc_ddrphy_phyinit_userCustom_customPostTrain] End of dwc_ddrphy_phyinit_userCustom_customPostTrain() */ |
| /* [dwc_ddrphy_phyinit_userCustom_J_enterMissionMode] Start of dwc_ddrphy_phyinit_userCustom_J_enterMissionMode() */ |
| /* */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| /* (J) Initialize the PHY to Mission Mode through DFI Initialization */ |
| /* */ |
| /* Initialize the PHY to mission mode as follows: */ |
| /* */ |
| /* 1. Set the PHY input clocks to the desired frequency. */ |
| /* 2. Initialize the PHY to mission mode by performing DFI Initialization. */ |
| /* Please see the DFI specification for more information. See the DFI frequency bus encoding in section <XXX>. */ |
| /* Note: The PHY training firmware initializes the DRAM state. if skip */ |
| /* training is used, the DRAM state is not initialized. */ |
| /* */ |
| /* ############################################################## */ |
| /* */ |
| dwc_ddrphy_phyinit_userCustom_J_enterMissionMode (); |
| |
| /* */ |
| /* [dwc_ddrphy_phyinit_userCustom_J_enterMissionMode] End of dwc_ddrphy_phyinit_userCustom_J_enterMissionMode() */ |
| /* [dwc_ddrphy_phyinit_sequence] End of dwc_ddrphy_phyinit_sequence() */ |
| /* [dwc_ddrphy_phyinit_main] End of dwc_ddrphy_phyinit_main() */ |
| |
| /* ---------------------------------------------------------------------- */ |
| /* save 1d2d training CSR */ |
| /* ---------------------------------------------------------------------- */ |
| if (!after_retention) { |
| save_1d2d_trained_csr_ddr3_p012(SAVE_DDRPHY_TRAIN_ADDR); |
| } |
| } |