| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> |
| * Copyright (C) 2012 Renesas Solutions Corp. |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/processor.h> |
| #include <netdev.h> |
| #include <i2c.h> |
| |
| #define MODEMR (0xFFCC0020) |
| #define MODEMR_MASK (0x6) |
| #define MODEMR_533MHZ (0x2) |
| |
| int checkboard(void) |
| { |
| u32 r = readl(MODEMR); |
| if ((r & MODEMR_MASK) & MODEMR_533MHZ) |
| puts("CPU Clock: 533MHz\n"); |
| else |
| puts("CPU Clock: 400MHz\n"); |
| |
| puts("BOARD: Alpha Project. AP-SH4A-4A\n"); |
| return 0; |
| } |
| |
| #define MSTPSR1 (0xFFC80044) |
| #define MSTPCR1 (0xFFC80034) |
| #define MSTPSR1_GETHER (1 << 14) |
| |
| /* IPSR3 */ |
| #define ET0_ETXD0 (0x4 << 3) |
| #define ET0_GTX_CLK_A (0x4 << 6) |
| #define ET0_ETXD1_A (0x4 << 9) |
| #define ET0_ETXD2_A (0x4 << 12) |
| #define ET0_ETXD3_A (0x4 << 15) |
| #define ET0_ETXD4 (0x3 << 18) |
| #define ET0_ETXD5_A (0x5 << 21) |
| #define ET0_ETXD6_A (0x5 << 24) |
| #define ET0_ETXD7 (0x4 << 27) |
| #define IPSR3_ETH_ENABLE \ |
| (ET0_ETXD0 | ET0_GTX_CLK_A | ET0_ETXD1_A | ET0_ETXD2_A | \ |
| ET0_ETXD3_A | ET0_ETXD4 | ET0_ETXD5_A | ET0_ETXD6_A | ET0_ETXD7) |
| |
| /* IPSR4 */ |
| #define ET0_ERXD7 (0x4) |
| #define ET0_RX_DV (0x4 << 3) |
| #define ET0_RX_ER (0x4 << 6) |
| #define ET0_CRS (0x4 << 9) |
| #define ET0_COL (0x4 << 12) |
| #define ET0_MDC (0x4 << 15) |
| #define ET0_MDIO_A (0x3 << 18) |
| #define ET0_LINK_A (0x3 << 20) |
| #define ET0_PHY_INT_A (0x3 << 24) |
| |
| #define IPSR4_ETH_ENABLE \ |
| (ET0_ERXD7 | ET0_RX_DV | ET0_RX_ER | ET0_CRS | ET0_COL | \ |
| ET0_MDC | ET0_MDIO_A | ET0_LINK_A | ET0_PHY_INT_A) |
| |
| /* IPSR8 */ |
| #define ET0_ERXD0 (0x4 << 20) |
| #define ET0_ERXD1 (0x4 << 23) |
| #define ET0_ERXD2_A (0x3 << 26) |
| #define ET0_ERXD3_A (0x3 << 28) |
| #define IPSR8_ETH_ENABLE \ |
| (ET0_ERXD0 | ET0_ERXD1 | ET0_ERXD2_A | ET0_ERXD3_A) |
| |
| /* IPSR10 */ |
| #define RX4_D (0x1 << 22) |
| #define TX4_D (0x1 << 23) |
| #define IPSR10_SCIF_ENABLE (RX4_D | TX4_D) |
| |
| /* IPSR11 */ |
| #define ET0_ERXD4 (0x4 << 4) |
| #define ET0_ERXD5 (0x4 << 7) |
| #define ET0_ERXD6 (0x3 << 10) |
| #define ET0_TX_EN (0x2 << 19) |
| #define ET0_TX_ER (0x2 << 21) |
| #define ET0_TX_CLK_A (0x4 << 23) |
| #define ET0_RX_CLK_A (0x3 << 26) |
| #define IPSR11_ETH_ENABLE \ |
| (ET0_ERXD4 | ET0_ERXD5 | ET0_ERXD6 | ET0_TX_EN | ET0_TX_ER | \ |
| ET0_TX_CLK_A | ET0_RX_CLK_A) |
| |
| #define GPSR1_INIT (0xFFFF7FFF) |
| #define GPSR2_INIT (0x4005FEFF) |
| #define GPSR3_INIT (0x2EFFFFFF) |
| #define GPSR4_INIT (0xC7000000) |
| |
| int board_init(void) |
| { |
| u32 data; |
| |
| /* Set IPSR register */ |
| data = readl(IPSR3); |
| data |= IPSR3_ETH_ENABLE; |
| writel(~data, PMMR); |
| writel(data, IPSR3); |
| |
| data = readl(IPSR4); |
| data |= IPSR4_ETH_ENABLE; |
| writel(~data, PMMR); |
| writel(data, IPSR4); |
| |
| data = readl(IPSR8); |
| data |= IPSR8_ETH_ENABLE; |
| writel(~data, PMMR); |
| writel(data, IPSR8); |
| |
| data = readl(IPSR10); |
| data |= IPSR10_SCIF_ENABLE; |
| writel(~data, PMMR); |
| writel(data, IPSR10); |
| |
| data = readl(IPSR11); |
| data |= IPSR11_ETH_ENABLE; |
| writel(~data, PMMR); |
| writel(data, IPSR11); |
| |
| /* GPIO select */ |
| data = GPSR1_INIT; |
| writel(~data, PMMR); |
| writel(data, GPSR1); |
| |
| data = GPSR2_INIT; |
| writel(~data, PMMR); |
| writel(data, GPSR2); |
| |
| data = GPSR3_INIT; |
| writel(~data, PMMR); |
| writel(data, GPSR3); |
| |
| data = GPSR4_INIT; |
| writel(~data, PMMR); |
| writel(data, GPSR4); |
| |
| data = 0x0; |
| writel(~data, PMMR); |
| writel(data, GPSR5); |
| |
| /* mode select */ |
| data = MODESEL2_INIT; |
| writel(~data, PMMR); |
| writel(data, MODESEL2); |
| |
| #if defined(CONFIG_SH_ETHER) |
| u32 r = readl(MSTPSR1); |
| if (r & MSTPSR1_GETHER) |
| writel((r & ~MSTPSR1_GETHER), MSTPCR1); |
| #endif |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| printf("Cannot use I2C to get MAC address\n"); |
| |
| return 0; |
| } |