| /* |
| * Copyright 2012-2013 Stefan Roese <sr@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_MPC5200 |
| #define CONFIG_A3M071 /* A3M071 board */ |
| |
| #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ |
| |
| #define CONFIG_SPL_TARGET "u-boot-img.bin" |
| |
| #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ |
| |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_SYS_LOWBOOT /* Enable lowboot */ |
| |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_HOSTNAME a4m2k |
| #else |
| #define CONFIG_HOSTNAME a3m071 |
| #endif |
| |
| #define CONFIG_BOOTCOUNT_LIMIT |
| |
| /* |
| * Serial console configuration |
| */ |
| #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ |
| #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ |
| #define CONFIG_SYS_BAUDRATE_TABLE \ |
| { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_CMD_BSP |
| #define CONFIG_CMD_REGINFO |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_BOOTP_SERVERIP |
| #define CONFIG_BOOTP_MAY_FAIL |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_SERVERIP |
| #define CONFIG_NET_RETRY_COUNT 3 |
| #define CONFIG_NETCONSOLE |
| #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ |
| #define CONFIG_MTD_PARTITIONS /* needed for UBI */ |
| #define CONFIG_FLASH_CFI_MTD |
| #define MTDIDS_DEFAULT "nor0=fc000000.flash" |
| #define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ |
| "128k(env1)," \ |
| "128k(env2)," \ |
| "128k(hwinfo)," \ |
| "1M(nvramsim)," \ |
| "128k(dtb)," \ |
| "5M(kernel)," \ |
| "128k(sysinfo)," \ |
| "7552k(root)," \ |
| "4M(app)," \ |
| "5376k(data)," \ |
| "8M(install)" |
| |
| #define CONFIG_LZO /* needed for UBI */ |
| #define CONFIG_RBTREE /* needed for UBI */ |
| #define CONFIG_CMD_MTDPARTS |
| #define CONFIG_CMD_UBIFS |
| |
| /* |
| * IPB Bus clocking configuration. |
| */ |
| #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
| /* define for 66MHz speed - undef for 33MHz PCI clock speed */ |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 |
| #else |
| #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 |
| #endif |
| |
| /* maximum size of the flat tree (8K) */ |
| #define OF_FLAT_TREE_MAX_SIZE 8192 |
| |
| #define OF_CPU "PowerPC,5200@0" |
| #define OF_SOC "soc5200@f0000000" |
| #define OF_TBCLK (bd->bi_busfreq / 4) |
| #define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" |
| |
| /* |
| * NOR flash configuration |
| */ |
| #define CONFIG_SYS_FLASH_BASE 0xfc000000 |
| #define CONFIG_SYS_FLASH_SIZE 0x02000000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 256 |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 240000 |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 |
| #define CONFIG_SYS_FLASH_LOCK_TOUT 5 |
| #define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 |
| #define CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| #define CONFIG_FLASH_VERIFY |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_SECT_SIZE 0x20000 |
| #define CONFIG_ENV_OVERWRITE |
| #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) |
| #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
| |
| /* |
| * Memory map |
| */ |
| #define CONFIG_SYS_MBAR 0xf0000000 |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 |
| |
| /* Use SRAM until RAM will be available */ |
| #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM |
| #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| |
| #define CONFIG_SYS_MONITOR_LEN (512 << 10) |
| #define CONFIG_SYS_MALLOC_LEN (4 << 20) |
| #define CONFIG_SYS_BOOTMAPSZ (8 << 20) |
| |
| /* |
| * Ethernet configuration |
| */ |
| #define CONFIG_MPC5xxx_FEC |
| #define CONFIG_MPC5xxx_FEC_MII100 |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_PHY_ADDR 0x01 |
| #else |
| #define CONFIG_PHY_ADDR 0x00 |
| #endif |
| |
| /* |
| * GPIO configuration |
| */ |
| |
| /* |
| * GPIO-config depends on failsave-level |
| * failsave 0 means just MPX-config, no digiboard, no fpga |
| * 1 means digiboard ok |
| * 2 means fpga ok |
| */ |
| |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C805 |
| #else |
| /* for failsave-level 0 - full failsave */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 |
| /* for failsave-level 1 - only digiboard ok */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C065 |
| /* for failsave-level 2 - all ok */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C065 |
| #endif |
| |
| #define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 |
| #if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD) |
| #define CONFIG_HW_WATCHDOG /* Use external HW-Watchdog */ |
| #endif |
| |
| /* |
| * Configuration matrix |
| * MSB LSB |
| * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) |
| * failsave 1 0x1005C065 00010000000001011100000001100101 ( digib.-ver ok ) |
| * failsave 2 0x1005C065 00010000000001011100000001100101 ( all ok ) |
| * || ||| || | ||| | | | | |
| * || ||| || | ||| | | | | bit rev name |
| * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 |
| * +-+++-++--+---+++-+---+---+---+- 1 30 LPTZ |
| * ||| || | ||| | | | | 2 29 ALTs |
| * +++-++--+---+++-+---+---+---+- 3 28 ALTs |
| * ++-++--+---+++-+---+---+---+- 4 27 CS7 |
| * +-++--+---+++-+---+---+---+- 5 26 CS6 |
| * || | ||| | | | | 6 25 ATA |
| * ++--+---+++-+---+---+---+- 7 24 ATA |
| * +--+---+++-+---+---+---+- 8 23 IR_USB_CLK |
| * | ||| | | | | 9 22 IRDA |
| * | ||| | | | | 10 21 IRDA |
| * +---+++-+---+---+---+- 11 20 IRDA |
| * ||| | | | | 12 19 Ether |
| * ||| | | | | 13 18 Ether |
| * ||| | | | | 14 17 Ether |
| * +++-+---+---+---+- 15 16 Ether |
| * ++-+---+---+---+- 16 15 PCI_DIS |
| * +-+---+---+---+- 17 14 USB_SE |
| * | | | | 18 13 USB |
| * +---+---+---+- 19 12 USB |
| * | | | 20 11 PSC3 |
| * | | | 21 10 PSC3 |
| * | | | 22 9 PSC3 |
| * +---+---+- 23 8 PSC3 |
| * | | 24 7 - |
| * | | 25 6 PSC2 |
| * | | 26 5 PSC2 |
| * +---+- 27 4 PSC2 |
| * | 28 3 - |
| * | 29 2 PSC1 |
| * | 30 1 PSC1 |
| * +- 31 0 PSC1 |
| */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP |
| |
| #define CONFIG_CMDLINE_EDITING |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 |
| #else |
| #define CONFIG_SYS_CBSIZE 256 |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00100000 |
| #define CONFIG_SYS_MEMTEST_END 0x00f00000 |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x00100000 |
| |
| /* |
| * Various low-level settings |
| */ |
| #define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI) |
| #define CONFIG_SYS_HID0_FINAL HID0_ICE |
| |
| #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE |
| #define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE |
| |
| #ifdef CONFIG_A4M2K |
| /* external MRAM */ |
| #define CONFIG_SYS_CS1_START 0xf1000000 |
| #define CONFIG_SYS_CS1_SIZE (512 << 10) /* 512KiB MRAM */ |
| #endif |
| |
| #define CONFIG_SYS_CS2_START 0xe0000000 |
| #define CONFIG_SYS_CS2_SIZE 0x00100000 |
| |
| /* FPGA slave io (512kiB / 1MiB) - see ticket #66 */ |
| #define CONFIG_SYS_CS3_START 0xE9000000 |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_SYS_CS3_SIZE 0x00100000 |
| #else |
| #define CONFIG_SYS_CS3_SIZE 0x00080000 |
| #endif |
| /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ |
| #define CONFIG_SYS_CS3_CFG 0x0032B900 |
| |
| #ifndef CONFIG_A4M2K |
| /* Diagnosis Interface - see ticket #63 */ |
| #define CONFIG_SYS_CS4_START 0xEA000000 |
| #define CONFIG_SYS_CS4_SIZE 0x00000001 |
| /* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */ |
| #define CONFIG_SYS_CS4_CFG 0x0002B900 |
| #endif |
| |
| /* FPGA master io (64kiB / 1MiB) - see ticket #66 */ |
| #define CONFIG_SYS_CS5_START 0xE8000000 |
| #ifdef CONFIG_A4M2K |
| #define CONFIG_SYS_CS5_SIZE 0x00100000 |
| #else |
| #define CONFIG_SYS_CS5_SIZE 0x00010000 |
| #endif |
| /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ |
| #define CONFIG_SYS_CS5_CFG 0x0032B900 |
| |
| #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */ |
| #define CONFIG_SYS_BOOTCS_CFG 0x0006F900 |
| #define CONFIG_SYS_CS1_CFG 0x0008FD00 |
| #define CONFIG_SYS_CS2_CFG 0x0006F90C |
| #else /* for pci_clk = 33 MHz */ |
| #define CONFIG_SYS_BOOTCS_CFG 0x0002F900 |
| #define CONFIG_SYS_CS1_CFG 0x0001FB00 |
| #define CONFIG_SYS_CS2_CFG 0x0002F90C |
| #endif |
| |
| #define CONFIG_SYS_CS_BURST 0x00000000 |
| /* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */ |
| /* R 7 R 6 R 5 R 4 R 3 R 2 R 1 R 0 */ |
| /* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */ |
| #define CONFIG_SYS_CS_DEADCYCLE 0x33030000 |
| |
| #define CONFIG_SYS_RESET_ADDRESS 0xff000000 |
| |
| /* |
| * Environment Configuration |
| */ |
| |
| #undef CONFIG_BOOTARGS |
| |
| #define CONFIG_SYS_AUTOLOAD "n" |
| |
| #define CONFIG_PREBOOT "echo;" \ |
| "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \ |
| "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \ |
| "echo" |
| |
| #undef CONFIG_BOOTARGS |
| |
| #define CONFIG_SYS_FDT_BASE 0xfc1e0000 |
| #define CONFIG_SYS_FDT_SIZE (16<<10) |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "verify=no\0" \ |
| "loadaddr=200000\0" \ |
| "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0" \ |
| "kernel_addr_r=1000000\0" \ |
| "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0" \ |
| "fdt_addr_r=1800000\0" \ |
| "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ |
| "fdtfile=" __stringify(CONFIG_HOSTNAME) "/" \ |
| __stringify(CONFIG_HOSTNAME) ".dtb\0" \ |
| "rootpath=/opt/eldk-5.2.1/powerpc/" \ |
| "core-image-minimal-mtdutils-dropbear-generic\0" \ |
| "consoledev=ttyPSC0\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ |
| "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ |
| "rootfstype=squashfs,jffs2\0" \ |
| "addhost=setenv bootargs ${bootargs} " \ |
| "hostname=${hostname}\0" \ |
| "addip=setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ |
| ":${hostname}:${netdev}:off panic=1\0" \ |
| "addtty=setenv bootargs ${bootargs} " \ |
| "console=${consoledev},${baudrate}\0" \ |
| "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ |
| "bootm ${kernel_addr} - ${fdt_addr}\0" \ |
| "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ |
| "bootm ${kernel_addr} - ${fdt_addr}\0" \ |
| "flash_self=run ramargs addip addtty addmtd addhost;" \ |
| "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ |
| "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ |
| "tftp ${fdt_addr_r} ${fdtfile};" \ |
| "run nfsargs addip addtty addmtd addhost;" \ |
| "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ |
| "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ |
| "/u-boot-img.bin\0" \ |
| "update=protect off fc000000 fc07ffff;" \ |
| "era fc000000 fc07ffff;" \ |
| "cp.b ${loadaddr} fc000000 ${filesize}\0" \ |
| "upd=run load;run update\0" \ |
| "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ |
| "run mtdargs addip addtty addmtd addhost;" \ |
| "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ |
| "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ |
| "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ |
| "erase fc200000 fc6fffff;" \ |
| "cp.b 1000000 fc200000 ${filesize}" \ |
| "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ |
| "mtdids=" MTDIDS_DEFAULT "\0" \ |
| "mtdparts=" MTDPARTS_DEFAULT "\0" \ |
| "" |
| |
| #define CONFIG_BOOTCOMMAND "run flash_mtd" |
| |
| /* |
| * SPL related defines |
| */ |
| #define CONFIG_SPL_FRAMEWORK |
| #define CONFIG_SPL_BOARD_INIT |
| #define CONFIG_SPL_TEXT_BASE 0xfc000000 |
| |
| /* Place BSS for SPL near end of SDRAM */ |
| #define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20) |
| #define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) |
| |
| /* Place patched DT blob (fdt) at this address */ |
| #define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 |
| |
| /* Settings for real U-Boot to be loaded from NOR flash */ |
| #ifndef __ASSEMBLY__ |
| extern char __spl_flash_end[]; |
| #endif |
| #define CONFIG_SYS_UBOOT_BASE __spl_flash_end |
| #define CONFIG_SYS_SPL_MAX_LEN (32 << 10) |
| #define CONFIG_SYS_UBOOT_START 0x1000100 |
| |
| #endif /* __CONFIG_H */ |
