| /* |
| * Device Tree Source for UniPhier sLD8 SoC |
| * |
| * Copyright (C) 2015-2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ X11 |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| compatible = "socionext,uniphier-sld8"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| enable-method = "psci"; |
| next-level-cache = <&l2>; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| clocks { |
| refclk: ref { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| arm_timer_clk: arm_timer_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <50000000>; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-parent = <&intc>; |
| u-boot,dm-pre-reloc; |
| |
| l2: l2-cache@500c0000 { |
| compatible = "socionext,uniphier-system-cache"; |
| reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, |
| <0x506c0000 0x400>; |
| interrupts = <0 174 4>, <0 175 4>; |
| cache-unified; |
| cache-size = <(256 * 1024)>; |
| cache-sets = <256>; |
| cache-line-size = <128>; |
| cache-level = <2>; |
| }; |
| |
| serial0: serial@54006800 { |
| compatible = "socionext,uniphier-uart"; |
| status = "disabled"; |
| reg = <0x54006800 0x40>; |
| interrupts = <0 33 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart0>; |
| clocks = <&peri_clk 0>; |
| clock-frequency = <80000000>; |
| }; |
| |
| serial1: serial@54006900 { |
| compatible = "socionext,uniphier-uart"; |
| status = "disabled"; |
| reg = <0x54006900 0x40>; |
| interrupts = <0 35 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| clocks = <&peri_clk 1>; |
| clock-frequency = <80000000>; |
| }; |
| |
| serial2: serial@54006a00 { |
| compatible = "socionext,uniphier-uart"; |
| status = "disabled"; |
| reg = <0x54006a00 0x40>; |
| interrupts = <0 37 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| clocks = <&peri_clk 2>; |
| clock-frequency = <80000000>; |
| }; |
| |
| serial3: serial@54006b00 { |
| compatible = "socionext,uniphier-uart"; |
| status = "disabled"; |
| reg = <0x54006b00 0x40>; |
| interrupts = <0 29 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| clocks = <&peri_clk 3>; |
| clock-frequency = <80000000>; |
| }; |
| |
| port0x: gpio@55000008 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000008 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port1x: gpio@55000010 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000010 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port2x: gpio@55000018 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000018 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port3x: gpio@55000020 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000020 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port4: gpio@55000028 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000028 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port5x: gpio@55000030 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000030 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port6x: gpio@55000038 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000038 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port7x: gpio@55000040 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000040 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port8x: gpio@55000048 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000048 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port9x: gpio@55000050 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000050 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port10x: gpio@55000058 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000058 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port11x: gpio@55000060 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000060 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port12x: gpio@55000068 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000068 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port13x: gpio@55000070 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000070 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port14x: gpio@55000078 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000078 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| port16x: gpio@55000088 { |
| compatible = "socionext,uniphier-gpio"; |
| reg = <0x55000088 0x8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| i2c0: i2c@58400000 { |
| compatible = "socionext,uniphier-i2c"; |
| status = "disabled"; |
| reg = <0x58400000 0x40>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 41 1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0>; |
| clocks = <&peri_clk 4>; |
| clock-frequency = <100000>; |
| }; |
| |
| i2c1: i2c@58480000 { |
| compatible = "socionext,uniphier-i2c"; |
| status = "disabled"; |
| reg = <0x58480000 0x40>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 42 1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| clocks = <&peri_clk 5>; |
| clock-frequency = <100000>; |
| }; |
| |
| /* chip-internal connection for DMD */ |
| i2c2: i2c@58500000 { |
| compatible = "socionext,uniphier-i2c"; |
| reg = <0x58500000 0x40>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 43 1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| clocks = <&peri_clk 6>; |
| clock-frequency = <400000>; |
| }; |
| |
| i2c3: i2c@58580000 { |
| compatible = "socionext,uniphier-i2c"; |
| status = "disabled"; |
| reg = <0x58580000 0x40>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 44 1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| clocks = <&peri_clk 7>; |
| clock-frequency = <100000>; |
| }; |
| |
| system_bus: system-bus@58c00000 { |
| compatible = "socionext,uniphier-system-bus"; |
| status = "disabled"; |
| reg = <0x58c00000 0x400>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_system_bus>; |
| }; |
| |
| smpctrl@59800000 { |
| compatible = "socionext,uniphier-smpctrl"; |
| reg = <0x59801000 0x400>; |
| }; |
| |
| mioctrl@59810000 { |
| compatible = "socionext,uniphier-sld8-mioctrl", |
| "simple-mfd", "syscon"; |
| reg = <0x59810000 0x800>; |
| |
| mio_clk: clock { |
| compatible = "socionext,uniphier-sld8-mio-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| mio_rst: reset { |
| compatible = "socionext,uniphier-sld8-mio-reset"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| perictrl@59820000 { |
| compatible = "socionext,uniphier-sld8-perictrl", |
| "simple-mfd", "syscon"; |
| reg = <0x59820000 0x200>; |
| |
| peri_clk: clock { |
| compatible = "socionext,uniphier-sld8-peri-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| peri_rst: reset { |
| compatible = "socionext,uniphier-sld8-peri-reset"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| sd: sdhc@5a400000 { |
| compatible = "socionext,uniphier-sdhc"; |
| status = "disabled"; |
| reg = <0x5a400000 0x200>; |
| interrupts = <0 76 4>; |
| pinctrl-names = "default", "1.8v"; |
| pinctrl-0 = <&pinctrl_sd>; |
| pinctrl-1 = <&pinctrl_sd_1v8>; |
| clocks = <&mio_clk 0>; |
| reset-names = "host", "bridge"; |
| resets = <&mio_rst 0>, <&mio_rst 3>; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| }; |
| |
| emmc: sdhc@5a500000 { |
| compatible = "socionext,uniphier-sdhc"; |
| status = "disabled"; |
| reg = <0x5a500000 0x200>; |
| interrupts = <0 78 4>; |
| pinctrl-names = "default", "1.8v"; |
| pinctrl-0 = <&pinctrl_emmc>; |
| pinctrl-1 = <&pinctrl_emmc_1v8>; |
| clocks = <&mio_clk 1>; |
| reset-names = "host", "bridge"; |
| resets = <&mio_rst 1>, <&mio_rst 4>; |
| bus-width = <8>; |
| non-removable; |
| cap-mmc-highspeed; |
| cap-mmc-hw-reset; |
| }; |
| |
| usb0: usb@5a800100 { |
| compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| status = "disabled"; |
| reg = <0x5a800100 0x100>; |
| interrupts = <0 80 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb0>; |
| clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; |
| resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, |
| <&mio_rst 12>; |
| }; |
| |
| usb1: usb@5a810100 { |
| compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| status = "disabled"; |
| reg = <0x5a810100 0x100>; |
| interrupts = <0 81 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb1>; |
| clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; |
| resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, |
| <&mio_rst 13>; |
| }; |
| |
| usb2: usb@5a820100 { |
| compatible = "socionext,uniphier-ehci", "generic-ehci"; |
| status = "disabled"; |
| reg = <0x5a820100 0x100>; |
| interrupts = <0 82 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb2>; |
| clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; |
| resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, |
| <&mio_rst 14>; |
| }; |
| |
| soc-glue@5f800000 { |
| compatible = "socionext,uniphier-sld8-soc-glue", |
| "simple-mfd", "syscon"; |
| reg = <0x5f800000 0x2000>; |
| u-boot,dm-pre-reloc; |
| |
| pinctrl: pinctrl { |
| compatible = "socionext,uniphier-sld8-pinctrl"; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| timer@60000200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0x60000200 0x20>; |
| interrupts = <1 11 0x104>; |
| clocks = <&arm_timer_clk>; |
| }; |
| |
| timer@60000600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0x60000600 0x20>; |
| interrupts = <1 13 0x104>; |
| clocks = <&arm_timer_clk>; |
| }; |
| |
| intc: interrupt-controller@60001000 { |
| compatible = "arm,cortex-a9-gic"; |
| reg = <0x60001000 0x1000>, |
| <0x60000100 0x100>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| }; |
| |
| aidet@61830000 { |
| compatible = "simple-mfd", "syscon"; |
| reg = <0x61830000 0x200>; |
| }; |
| |
| sysctrl@61840000 { |
| compatible = "socionext,uniphier-sld8-sysctrl", |
| "simple-mfd", "syscon"; |
| reg = <0x61840000 0x10000>; |
| |
| sys_clk: clock { |
| compatible = "socionext,uniphier-sld8-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| sys_rst: reset { |
| compatible = "socionext,uniphier-sld8-reset"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| nand: nand@68000000 { |
| compatible = "socionext,denali-nand-v5a"; |
| status = "disabled"; |
| reg-names = "nand_data", "denali_reg"; |
| reg = <0x68000000 0x20>, <0x68100000 0x1000>; |
| interrupts = <0 65 4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nand>; |
| clocks = <&sys_clk 2>; |
| nand-ecc-strength = <8>; |
| }; |
| }; |
| }; |
| |
| /include/ "uniphier-pinctrl.dtsi" |
