| /* |
| * relocate - i.MX27-specific vector relocation |
| * |
| * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <linux/linkage.h> |
| |
| /* |
| * The i.MX27 SoC is very specific with respect to exceptions: it |
| * does not provide RAM at the high vectors address (0xFFFF0000), |
| * thus only the low address (0x00000000) is useable; but that is |
| * in ROM. Therefore, vectors cannot be changed at all. |
| * |
| * However, these ROM-based vectors actually just perform indirect |
| * calls through pointers located in RAM at SoC-specific addresses, |
| * as follows: |
| * |
| * Offset Exception Use by ROM code |
| * 0x00000000 reset indirect branch to [0x00000014] |
| * 0x00000004 undefined instruction indirect branch to [0xfffffef0] |
| * 0x00000008 software interrupt indirect branch to [0xfffffef4] |
| * 0x0000000c prefetch abort indirect branch to [0xfffffef8] |
| * 0x00000010 data abort indirect branch to [0xfffffefc] |
| * 0x00000014 (reserved in ARMv5) vector to ROM reset: 0xc0000000 |
| * 0x00000018 IRQ indirect branch to [0xffffff00] |
| * 0x0000001c FIQ indirect branch to [0xffffff04] |
| * |
| * In order to initialize exceptions on i.MX27, we must copy U-Boot's |
| * indirect (not exception!) vector table into 0xfffffef0..0xffffff04 |
| * taking care not to copy vectors number 5 (reserved exception). |
| */ |
| |
| .section .text.relocate_vectors,"ax",%progbits |
| |
| ENTRY(relocate_vectors) |
| |
| ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */ |
| ldr r1, =32 /* size of vector table */ |
| add r0, r0, r1 /* skip to indirect table */ |
| ldr r1, =0xFFFFFEF0 /* i.MX27 indirect table */ |
| ldmia r0!, {r2-r8} /* load indirect vectors 1..7 */ |
| stmia r1!, {r2-r5, r7,r8} /* write all but vector 5 */ |
| |
| bx lr |
| |
| ENDPROC(relocate_vectors) |
