| /* |
| * Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org> |
| * Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <div64.h> |
| #include <netdev.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/imx-common/sys_proto.h> |
| #ifdef CONFIG_MMC_MXC |
| #include <asm/arch/mxcmmc.h> |
| #endif |
| |
| /* |
| * get the system pll clock in Hz |
| * |
| * mfi + mfn / (mfd +1) |
| * f = 2 * f_ref * -------------------- |
| * pd + 1 |
| */ |
| static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref) |
| { |
| unsigned int mfi = (pll >> 10) & 0xf; |
| unsigned int mfn = pll & 0x3ff; |
| unsigned int mfd = (pll >> 16) & 0x3ff; |
| unsigned int pd = (pll >> 26) & 0xf; |
| |
| mfi = mfi <= 5 ? 5 : mfi; |
| |
| return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn), |
| (mfd + 1) * (pd + 1)); |
| } |
| |
| static ulong clk_in_32k(void) |
| { |
| return 1024 * CONFIG_MX27_CLK32; |
| } |
| |
| static ulong clk_in_26m(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) { |
| /* divide by 1.5 */ |
| return 26000000 * 2 / 3; |
| } else { |
| return 26000000; |
| } |
| } |
| |
| static ulong imx_get_mpllclk(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| ulong cscr = readl(&pll->cscr); |
| ulong fref; |
| |
| if (cscr & CSCR_MCU_SEL) |
| fref = clk_in_26m(); |
| else |
| fref = clk_in_32k(); |
| |
| return imx_decode_pll(readl(&pll->mpctl0), fref); |
| } |
| |
| static ulong imx_get_armclk(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| ulong cscr = readl(&pll->cscr); |
| ulong fref = imx_get_mpllclk(); |
| ulong div; |
| |
| if (!(cscr & CSCR_ARM_SRC_MPLL)) |
| fref = lldiv((fref * 2), 3); |
| |
| div = ((cscr >> 12) & 0x3) + 1; |
| |
| return lldiv(fref, div); |
| } |
| |
| static ulong imx_get_ahbclk(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| ulong cscr = readl(&pll->cscr); |
| ulong fref = imx_get_mpllclk(); |
| ulong div; |
| |
| div = ((cscr >> 8) & 0x3) + 1; |
| |
| return lldiv(fref * 2, 3 * div); |
| } |
| |
| static __attribute__((unused)) ulong imx_get_spllclk(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| ulong cscr = readl(&pll->cscr); |
| ulong fref; |
| |
| if (cscr & CSCR_SP_SEL) |
| fref = clk_in_26m(); |
| else |
| fref = clk_in_32k(); |
| |
| return imx_decode_pll(readl(&pll->spctl0), fref); |
| } |
| |
| static ulong imx_decode_perclk(ulong div) |
| { |
| return lldiv((imx_get_mpllclk() * 2), (div * 3)); |
| } |
| |
| static ulong imx_get_perclk1(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1); |
| } |
| |
| static ulong imx_get_perclk2(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1); |
| } |
| |
| static __attribute__((unused)) ulong imx_get_perclk3(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1); |
| } |
| |
| static __attribute__((unused)) ulong imx_get_perclk4(void) |
| { |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1); |
| } |
| |
| unsigned int mxc_get_clock(enum mxc_clock clk) |
| { |
| switch (clk) { |
| case MXC_ARM_CLK: |
| return imx_get_armclk(); |
| case MXC_I2C_CLK: |
| return imx_get_ahbclk()/2; |
| case MXC_UART_CLK: |
| return imx_get_perclk1(); |
| case MXC_FEC_CLK: |
| return imx_get_ahbclk(); |
| case MXC_ESDHC_CLK: |
| return imx_get_perclk2(); |
| } |
| return -1; |
| } |
| |
| |
| u32 get_cpu_rev(void) |
| { |
| return MXC_CPU_MX27 << 12; |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo (void) |
| { |
| char buf[32]; |
| |
| printf("CPU: Freescale i.MX27 at %s MHz\n\n", |
| strmhz(buf, imx_get_mpllclk())); |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| #if defined(CONFIG_FEC_MXC) |
| struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; |
| |
| /* enable FEC clock */ |
| writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1); |
| writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0); |
| return fecmxc_initialize(bis); |
| #else |
| return 0; |
| #endif |
| } |
| |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(bd_t *bis) |
| { |
| #ifdef CONFIG_MMC_MXC |
| return mxc_mmc_init(bis); |
| #else |
| return 0; |
| #endif |
| } |
| |
| void imx_gpio_mode(int gpio_mode) |
| { |
| struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE; |
| unsigned int pin = gpio_mode & GPIO_PIN_MASK; |
| unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; |
| unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; |
| unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT; |
| unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT; |
| unsigned int tmp; |
| |
| /* Pullup enable */ |
| if (gpio_mode & GPIO_PUEN) { |
| writel(readl(®s->port[port].puen) | (1 << pin), |
| ®s->port[port].puen); |
| } else { |
| writel(readl(®s->port[port].puen) & ~(1 << pin), |
| ®s->port[port].puen); |
| } |
| |
| /* Data direction */ |
| if (gpio_mode & GPIO_OUT) { |
| writel(readl(®s->port[port].gpio_dir) | 1 << pin, |
| ®s->port[port].gpio_dir); |
| } else { |
| writel(readl(®s->port[port].gpio_dir) & ~(1 << pin), |
| ®s->port[port].gpio_dir); |
| } |
| |
| /* Primary / alternate function */ |
| if (gpio_mode & GPIO_AF) { |
| writel(readl(®s->port[port].gpr) | (1 << pin), |
| ®s->port[port].gpr); |
| } else { |
| writel(readl(®s->port[port].gpr) & ~(1 << pin), |
| ®s->port[port].gpr); |
| } |
| |
| /* use as gpio? */ |
| if (!(gpio_mode & (GPIO_PF | GPIO_AF))) { |
| writel(readl(®s->port[port].gius) | (1 << pin), |
| ®s->port[port].gius); |
| } else { |
| writel(readl(®s->port[port].gius) & ~(1 << pin), |
| ®s->port[port].gius); |
| } |
| |
| /* Output / input configuration */ |
| if (pin < 16) { |
| tmp = readl(®s->port[port].ocr1); |
| tmp &= ~(3 << (pin * 2)); |
| tmp |= (ocr << (pin * 2)); |
| writel(tmp, ®s->port[port].ocr1); |
| |
| writel(readl(®s->port[port].iconfa1) & ~(3 << (pin * 2)), |
| ®s->port[port].iconfa1); |
| writel(readl(®s->port[port].iconfa1) | aout << (pin * 2), |
| ®s->port[port].iconfa1); |
| writel(readl(®s->port[port].iconfb1) & ~(3 << (pin * 2)), |
| ®s->port[port].iconfb1); |
| writel(readl(®s->port[port].iconfb1) | bout << (pin * 2), |
| ®s->port[port].iconfb1); |
| } else { |
| pin -= 16; |
| |
| tmp = readl(®s->port[port].ocr2); |
| tmp &= ~(3 << (pin * 2)); |
| tmp |= (ocr << (pin * 2)); |
| writel(tmp, ®s->port[port].ocr2); |
| |
| writel(readl(®s->port[port].iconfa2) & ~(3 << (pin * 2)), |
| ®s->port[port].iconfa2); |
| writel(readl(®s->port[port].iconfa2) | aout << (pin * 2), |
| ®s->port[port].iconfa2); |
| writel(readl(®s->port[port].iconfb2) & ~(3 << (pin * 2)), |
| ®s->port[port].iconfb2); |
| writel(readl(®s->port[port].iconfb2) | bout << (pin * 2), |
| ®s->port[port].iconfb2); |
| } |
| } |
| |
| #ifdef CONFIG_MXC_UART |
| void mx27_uart1_init_pins(void) |
| { |
| int i; |
| unsigned int mode[] = { |
| PE12_PF_UART1_TXD, |
| PE13_PF_UART1_RXD, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mode); i++) |
| imx_gpio_mode(mode[i]); |
| |
| } |
| #endif /* CONFIG_MXC_UART */ |
| |
| #ifdef CONFIG_FEC_MXC |
| void mx27_fec_init_pins(void) |
| { |
| int i; |
| unsigned int mode[] = { |
| PD0_AIN_FEC_TXD0, |
| PD1_AIN_FEC_TXD1, |
| PD2_AIN_FEC_TXD2, |
| PD3_AIN_FEC_TXD3, |
| PD4_AOUT_FEC_RX_ER, |
| PD5_AOUT_FEC_RXD1, |
| PD6_AOUT_FEC_RXD2, |
| PD7_AOUT_FEC_RXD3, |
| PD8_AF_FEC_MDIO, |
| PD9_AIN_FEC_MDC | GPIO_PUEN, |
| PD10_AOUT_FEC_CRS, |
| PD11_AOUT_FEC_TX_CLK, |
| PD12_AOUT_FEC_RXD0, |
| PD13_AOUT_FEC_RX_DV, |
| PD14_AOUT_FEC_CLR, |
| PD15_AOUT_FEC_COL, |
| PD16_AIN_FEC_TX_ER, |
| PF23_AIN_FEC_TX_EN, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mode); i++) |
| imx_gpio_mode(mode[i]); |
| } |
| |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) |
| { |
| int i; |
| struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; |
| struct fuse_bank *bank = &iim->bank[0]; |
| struct fuse_bank0_regs *fuse = |
| (struct fuse_bank0_regs *)bank->fuse_regs; |
| |
| for (i = 0; i < 6; i++) |
| mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff; |
| } |
| #endif /* CONFIG_FEC_MXC */ |
| |
| #ifdef CONFIG_MMC_MXC |
| void mx27_sd1_init_pins(void) |
| { |
| int i; |
| unsigned int mode[] = { |
| PE18_PF_SD1_D0, |
| PE19_PF_SD1_D1, |
| PE20_PF_SD1_D2, |
| PE21_PF_SD1_D3, |
| PE22_PF_SD1_CMD, |
| PE23_PF_SD1_CLK, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mode); i++) |
| imx_gpio_mode(mode[i]); |
| |
| } |
| |
| void mx27_sd2_init_pins(void) |
| { |
| int i; |
| unsigned int mode[] = { |
| PB4_PF_SD2_D0, |
| PB5_PF_SD2_D1, |
| PB6_PF_SD2_D2, |
| PB7_PF_SD2_D3, |
| PB8_PF_SD2_CMD, |
| PB9_PF_SD2_CLK, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(mode); i++) |
| imx_gpio_mode(mode[i]); |
| |
| } |
| #endif /* CONFIG_MMC_MXC */ |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| void enable_caches(void) |
| { |
| /* Enable D-cache. I-cache is already enabled in start.S */ |
| dcache_enable(); |
| } |
| #endif /* CONFIG_SYS_DCACHE_OFF */ |