| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2018 Liviu Dudau <liviu@dudau.co.uk> |
| * |
| * Based on the Linux driver, (C) 2012 Texas Instruments |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <display.h> |
| #include <i2c.h> |
| |
| /* |
| * TDA19988 uses paged registers. We encode the page# in the upper |
| * bits of the register#. It also means that reads/writes to a register |
| * have to ensure that the register's page is selected as the current |
| * page. |
| */ |
| #define REG(page, addr) (((page) << 8) | (addr)) |
| #define REG2ADDR(reg) ((reg) & 0xff) |
| #define REG2PAGE(reg) (((reg) >> 8) & 0xff) |
| |
| /* register for setting current page */ |
| #define REG_CURRENT_PAGE 0xff |
| |
| /* Page 00h: General Control */ |
| #define REG_VERSION_LSB REG(0x00, 0x00) /* read */ |
| #define REG_MAIN_CNTRL0 REG(0x00, 0x01) /* read/write */ |
| #define MAIN_CNTRL0_SR BIT(0) |
| #define MAIN_CNTRL0_DECS BIT(1) |
| #define MAIN_CNTRL0_DEHS BIT(2) |
| #define MAIN_CNTRL0_CECS BIT(3) |
| #define MAIN_CNTRL0_CEHS BIT(4) |
| #define MAIN_CNTRL0_SCALER BIT(7) |
| #define REG_VERSION_MSB REG(0x00, 0x02) /* read */ |
| #define REG_SOFTRESET REG(0x00, 0x0a) /* write */ |
| #define SOFTRESET_AUDIO BIT(0) |
| #define SOFTRESET_I2C_MASTER BIT(1) |
| #define REG_DDC_DISABLE REG(0x00, 0x0b) /* read/write */ |
| #define REG_I2C_MASTER REG(0x00, 0x0d) /* read/write */ |
| #define I2C_MASTER_DIS_MM BIT(0) |
| #define I2C_MASTER_DIS_FILT BIT(1) |
| #define I2C_MASTER_APP_STRT_LAT BIT(2) |
| #define REG_FEAT_POWERDOWN REG(0x00, 0x0e) /* read/write */ |
| #define FEAT_POWERDOWN_PREFILT BIT(0) |
| #define FEAT_POWERDOWN_CSC BIT(1) |
| #define FEAT_POWERDOWN_SPDIF BIT(3) |
| #define REG_INT_FLAGS_0 REG(0x00, 0x0f) /* read/write */ |
| #define REG_INT_FLAGS_1 REG(0x00, 0x10) /* read/write */ |
| #define REG_INT_FLAGS_2 REG(0x00, 0x11) /* read/write */ |
| #define INT_FLAGS_2_EDID_BLK_RD BIT(1) |
| #define REG_ENA_VP_0 REG(0x00, 0x18) /* read/write */ |
| #define REG_ENA_VP_1 REG(0x00, 0x19) /* read/write */ |
| #define REG_ENA_VP_2 REG(0x00, 0x1a) /* read/write */ |
| #define REG_ENA_AP REG(0x00, 0x1e) /* read/write */ |
| #define REG_VIP_CNTRL_0 REG(0x00, 0x20) /* write */ |
| #define VIP_CNTRL_0_MIRR_A BIT(7) |
| #define VIP_CNTRL_0_SWAP_A(x) (((x) & 7) << 4) |
| #define VIP_CNTRL_0_MIRR_B BIT(3) |
| #define VIP_CNTRL_0_SWAP_B(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_1 REG(0x00, 0x21) /* write */ |
| #define VIP_CNTRL_1_MIRR_C BIT(7) |
| #define VIP_CNTRL_1_SWAP_C(x) (((x) & 7) << 4) |
| #define VIP_CNTRL_1_MIRR_D BIT(3) |
| #define VIP_CNTRL_1_SWAP_D(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_2 REG(0x00, 0x22) /* write */ |
| #define VIP_CNTRL_2_MIRR_E BIT(7) |
| #define VIP_CNTRL_2_SWAP_E(x) (((x) & 7) << 4) |
| #define VIP_CNTRL_2_MIRR_F BIT(3) |
| #define VIP_CNTRL_2_SWAP_F(x) (((x) & 7) << 0) |
| #define REG_VIP_CNTRL_3 REG(0x00, 0x23) /* write */ |
| #define VIP_CNTRL_3_X_TGL BIT(0) |
| #define VIP_CNTRL_3_H_TGL BIT(1) |
| #define VIP_CNTRL_3_V_TGL BIT(2) |
| #define VIP_CNTRL_3_EMB BIT(3) |
| #define VIP_CNTRL_3_SYNC_DE BIT(4) |
| #define VIP_CNTRL_3_SYNC_HS BIT(5) |
| #define VIP_CNTRL_3_DE_INT BIT(6) |
| #define VIP_CNTRL_3_EDGE BIT(7) |
| #define REG_VIP_CNTRL_4 REG(0x00, 0x24) /* write */ |
| #define VIP_CNTRL_4_BLC(x) (((x) & 3) << 0) |
| #define VIP_CNTRL_4_BLANKIT(x) (((x) & 3) << 2) |
| #define VIP_CNTRL_4_CCIR656 BIT(4) |
| #define VIP_CNTRL_4_656_ALT BIT(5) |
| #define VIP_CNTRL_4_TST_656 BIT(6) |
| #define VIP_CNTRL_4_TST_PAT BIT(7) |
| #define REG_VIP_CNTRL_5 REG(0x00, 0x25) /* write */ |
| #define VIP_CNTRL_5_CKCASE BIT(0) |
| #define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1) |
| #define REG_MUX_VP_VIP_OUT REG(0x00, 0x27) /* read/write */ |
| #define REG_MAT_CONTRL REG(0x00, 0x80) /* write */ |
| #define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0) |
| #define MAT_CONTRL_MAT_BP BIT(2) |
| #define REG_VIDFORMAT REG(0x00, 0xa0) /* write */ |
| #define REG_REFPIX_MSB REG(0x00, 0xa1) /* write */ |
| #define REG_REFPIX_LSB REG(0x00, 0xa2) /* write */ |
| #define REG_REFLINE_MSB REG(0x00, 0xa3) /* write */ |
| #define REG_REFLINE_LSB REG(0x00, 0xa4) /* write */ |
| #define REG_NPIX_MSB REG(0x00, 0xa5) /* write */ |
| #define REG_NPIX_LSB REG(0x00, 0xa6) /* write */ |
| #define REG_NLINE_MSB REG(0x00, 0xa7) /* write */ |
| #define REG_NLINE_LSB REG(0x00, 0xa8) /* write */ |
| #define REG_VS_LINE_STRT_1_MSB REG(0x00, 0xa9) /* write */ |
| #define REG_VS_LINE_STRT_1_LSB REG(0x00, 0xaa) /* write */ |
| #define REG_VS_PIX_STRT_1_MSB REG(0x00, 0xab) /* write */ |
| #define REG_VS_PIX_STRT_1_LSB REG(0x00, 0xac) /* write */ |
| #define REG_VS_LINE_END_1_MSB REG(0x00, 0xad) /* write */ |
| #define REG_VS_LINE_END_1_LSB REG(0x00, 0xae) /* write */ |
| #define REG_VS_PIX_END_1_MSB REG(0x00, 0xaf) /* write */ |
| #define REG_VS_PIX_END_1_LSB REG(0x00, 0xb0) /* write */ |
| #define REG_VS_LINE_STRT_2_MSB REG(0x00, 0xb1) /* write */ |
| #define REG_VS_LINE_STRT_2_LSB REG(0x00, 0xb2) /* write */ |
| #define REG_VS_PIX_STRT_2_MSB REG(0x00, 0xb3) /* write */ |
| #define REG_VS_PIX_STRT_2_LSB REG(0x00, 0xb4) /* write */ |
| #define REG_VS_LINE_END_2_MSB REG(0x00, 0xb5) /* write */ |
| #define REG_VS_LINE_END_2_LSB REG(0x00, 0xb6) /* write */ |
| #define REG_VS_PIX_END_2_MSB REG(0x00, 0xb7) /* write */ |
| #define REG_VS_PIX_END_2_LSB REG(0x00, 0xb8) /* write */ |
| #define REG_HS_PIX_START_MSB REG(0x00, 0xb9) /* write */ |
| #define REG_HS_PIX_START_LSB REG(0x00, 0xba) /* write */ |
| #define REG_HS_PIX_STOP_MSB REG(0x00, 0xbb) /* write */ |
| #define REG_HS_PIX_STOP_LSB REG(0x00, 0xbc) /* write */ |
| #define REG_VWIN_START_1_MSB REG(0x00, 0xbd) /* write */ |
| #define REG_VWIN_START_1_LSB REG(0x00, 0xbe) /* write */ |
| #define REG_VWIN_END_1_MSB REG(0x00, 0xbf) /* write */ |
| #define REG_VWIN_END_1_LSB REG(0x00, 0xc0) /* write */ |
| #define REG_VWIN_START_2_MSB REG(0x00, 0xc1) /* write */ |
| #define REG_VWIN_START_2_LSB REG(0x00, 0xc2) /* write */ |
| #define REG_VWIN_END_2_MSB REG(0x00, 0xc3) /* write */ |
| #define REG_VWIN_END_2_LSB REG(0x00, 0xc4) /* write */ |
| #define REG_DE_START_MSB REG(0x00, 0xc5) /* write */ |
| #define REG_DE_START_LSB REG(0x00, 0xc6) /* write */ |
| #define REG_DE_STOP_MSB REG(0x00, 0xc7) /* write */ |
| #define REG_DE_STOP_LSB REG(0x00, 0xc8) /* write */ |
| #define REG_TBG_CNTRL_0 REG(0x00, 0xca) /* write */ |
| #define TBG_CNTRL_0_TOP_TGL BIT(0) |
| #define TBG_CNTRL_0_TOP_SEL BIT(1) |
| #define TBG_CNTRL_0_DE_EXT BIT(2) |
| #define TBG_CNTRL_0_TOP_EXT BIT(3) |
| #define TBG_CNTRL_0_FRAME_DIS BIT(5) |
| #define TBG_CNTRL_0_SYNC_MTHD BIT(6) |
| #define TBG_CNTRL_0_SYNC_ONCE BIT(7) |
| #define REG_TBG_CNTRL_1 REG(0x00, 0xcb) /* write */ |
| #define TBG_CNTRL_1_H_TGL BIT(0) |
| #define TBG_CNTRL_1_V_TGL BIT(1) |
| #define TBG_CNTRL_1_TGL_EN BIT(2) |
| #define TBG_CNTRL_1_X_EXT BIT(3) |
| #define TBG_CNTRL_1_H_EXT BIT(4) |
| #define TBG_CNTRL_1_V_EXT BIT(5) |
| #define TBG_CNTRL_1_DWIN_DIS BIT(6) |
| #define REG_ENABLE_SPACE REG(0x00, 0xd6) /* write */ |
| #define REG_HVF_CNTRL_0 REG(0x00, 0xe4) /* write */ |
| #define HVF_CNTRL_0_SM BIT(7) |
| #define HVF_CNTRL_0_RWB BIT(6) |
| #define HVF_CNTRL_0_PREFIL(x) (((x) & 3) << 2) |
| #define HVF_CNTRL_0_INTPOL(x) (((x) & 3) << 0) |
| #define REG_HVF_CNTRL_1 REG(0x00, 0xe5) /* write */ |
| #define HVF_CNTRL_1_FOR BIT(0) |
| #define HVF_CNTRL_1_YUVBLK BIT(1) |
| #define HVF_CNTRL_1_VQR(x) (((x) & 3) << 2) |
| #define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4) |
| #define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */ |
| #define REG_AIP_CLKSEL REG(0x00, 0xfd) /* write */ |
| #define AIP_CLKSEL_AIP_SPDIF (0 << 3) |
| #define AIP_CLKSEL_AIP_I2S BIT(3) |
| #define AIP_CLKSEL_FS_ACLK (0 << 0) |
| #define AIP_CLKSEL_FS_MCLK BIT(0) |
| |
| /* Page 02h: PLL settings */ |
| #define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */ |
| #define PLL_SERIAL_1_SRL_FDN BIT(0) |
| #define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1) |
| #define PLL_SERIAL_1_SRL_MAN_IZ BIT(6) |
| #define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */ |
| #define PLL_SERIAL_2_SRL_NOSC(x) ((x) << 0) |
| #define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4) |
| #define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */ |
| #define PLL_SERIAL_3_SRL_CCIR BIT(0) |
| #define PLL_SERIAL_3_SRL_DE BIT(2) |
| #define PLL_SERIAL_3_SRL_PXIN_SEL BIT(4) |
| #define REG_SERIALIZER REG(0x02, 0x03) /* read/write */ |
| #define REG_BUFFER_OUT REG(0x02, 0x04) /* read/write */ |
| #define REG_PLL_SCG1 REG(0x02, 0x05) /* read/write */ |
| #define REG_PLL_SCG2 REG(0x02, 0x06) /* read/write */ |
| #define REG_PLL_SCGN1 REG(0x02, 0x07) /* read/write */ |
| #define REG_PLL_SCGN2 REG(0x02, 0x08) /* read/write */ |
| #define REG_PLL_SCGR1 REG(0x02, 0x09) /* read/write */ |
| #define REG_PLL_SCGR2 REG(0x02, 0x0a) /* read/write */ |
| #define REG_AUDIO_DIV REG(0x02, 0x0e) /* read/write */ |
| #define AUDIO_DIV_SERCLK_1 0 |
| #define AUDIO_DIV_SERCLK_2 1 |
| #define AUDIO_DIV_SERCLK_4 2 |
| #define AUDIO_DIV_SERCLK_8 3 |
| #define AUDIO_DIV_SERCLK_16 4 |
| #define AUDIO_DIV_SERCLK_32 5 |
| #define REG_SEL_CLK REG(0x02, 0x11) /* read/write */ |
| #define SEL_CLK_SEL_CLK1 BIT(0) |
| #define SEL_CLK_SEL_VRF_CLK(x) (((x) & 3) << 1) |
| #define SEL_CLK_ENA_SC_CLK BIT(3) |
| #define REG_ANA_GENERAL REG(0x02, 0x12) /* read/write */ |
| |
| /* Page 09h: EDID Control */ |
| #define REG_EDID_DATA_0 REG(0x09, 0x00) /* read */ |
| /* next 127 successive registers are the EDID block */ |
| #define REG_EDID_CTRL REG(0x09, 0xfa) /* read/write */ |
| #define REG_DDC_ADDR REG(0x09, 0xfb) /* read/write */ |
| #define REG_DDC_OFFS REG(0x09, 0xfc) /* read/write */ |
| #define REG_DDC_SEGM_ADDR REG(0x09, 0xfd) /* read/write */ |
| #define REG_DDC_SEGM REG(0x09, 0xfe) /* read/write */ |
| |
| /* Page 11h: audio settings and content info packets */ |
| #define REG_AIP_CNTRL_0 REG(0x11, 0x00) /* read/write */ |
| #define AIP_CNTRL_0_RST_FIFO BIT(0) |
| #define REG_ENC_CNTRL REG(0x11, 0x0d) /* read/write */ |
| #define ENC_CNTRL_RST_ENC BIT(0) |
| #define ENC_CNTRL_RST_SEL BIT(1) |
| #define ENC_CNTRL_CTL_CODE(x) (((x) & 3) << 2) |
| |
| /* Page 12h: HDCP and OTP */ |
| #define REG_TX3 REG(0x12, 0x9a) /* read/write */ |
| #define REG_TX4 REG(0x12, 0x9b) /* read/write */ |
| #define TX4_PD_RAM BIT(1) |
| #define REG_TX33 REG(0x12, 0xb8) /* read/write */ |
| #define TX33_HDMI BIT(1) |
| |
| /* CEC registers, not paged */ |
| #define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */ |
| #define CEC_FRO_IM_CLK_CTRL_GHOST_DIS BIT(7) |
| #define CEC_FRO_IM_CLK_CTRL_ENA_OTP BIT(6) |
| #define CEC_FRO_IM_CLK_CTRL_IMCLK_SEL BIT(1) |
| #define CEC_FRO_IM_CLK_CTRL_FRO_DIV BIT(0) |
| #define REG_CEC_RXSHPDINTENA 0xfc /* read/write */ |
| #define REG_CEC_RXSHPDINT 0xfd /* read */ |
| #define CEC_RXSHPDINT_RXSENS BIT(0) |
| #define CEC_RXSHPDINT_HPD BIT(1) |
| #define TDA19988_CEC_ENAMODS 0xff /* read/write */ |
| #define CEC_ENAMODS_EN_RXSENS BIT(2) |
| #define CEC_ENAMODS_EN_HDMI BIT(1) |
| #define CEC_ENAMODS_EN_CEC BIT(0) |
| |
| /* Device versions */ |
| #define TDA9989N2 0x0101 |
| #define TDA19989 0x0201 |
| #define TDA19989N2 0x0202 |
| #define TDA19988 0x0301 |
| |
| struct tda19988_priv { |
| struct udevice *chip; |
| struct udevice *cec_chip; |
| u16 revision; |
| u8 current_page; |
| }; |
| |
| static void tda19988_register_set(struct tda19988_priv *priv, u16 reg, u8 val) |
| { |
| u8 old_val, page = REG2PAGE(reg); |
| |
| if (priv->current_page != page) { |
| dm_i2c_reg_write(priv->chip, REG_CURRENT_PAGE, page); |
| priv->current_page = page; |
| } |
| old_val = dm_i2c_reg_read(priv->chip, REG2ADDR(reg)); |
| old_val |= val; |
| dm_i2c_reg_write(priv->chip, REG2ADDR(reg), old_val); |
| } |
| |
| static void tda19988_register_clear(struct tda19988_priv *priv, u16 reg, u8 val) |
| { |
| u8 old_val, page = REG2PAGE(reg); |
| |
| if (priv->current_page != page) { |
| dm_i2c_reg_write(priv->chip, REG_CURRENT_PAGE, page); |
| priv->current_page = page; |
| } |
| old_val = dm_i2c_reg_read(priv->chip, REG2ADDR(reg)); |
| old_val &= ~val; |
| dm_i2c_reg_write(priv->chip, REG2ADDR(reg), old_val); |
| } |
| |
| static void tda19988_register_write(struct tda19988_priv *priv, u16 reg, u8 val) |
| { |
| u8 page = REG2PAGE(reg); |
| |
| if (priv->current_page != page) { |
| dm_i2c_reg_write(priv->chip, REG_CURRENT_PAGE, page); |
| priv->current_page = page; |
| } |
| dm_i2c_reg_write(priv->chip, REG2ADDR(reg), val); |
| } |
| |
| static int tda19988_register_read(struct tda19988_priv *priv, u16 reg) |
| { |
| u8 page = REG2PAGE(reg); |
| |
| if (priv->current_page != page) { |
| dm_i2c_reg_write(priv->chip, REG_CURRENT_PAGE, page); |
| priv->current_page = page; |
| } |
| return dm_i2c_reg_read(priv->chip, REG2ADDR(reg)); |
| } |
| |
| static void tda19988_register_write16(struct tda19988_priv *priv, |
| u16 reg, u16 val) |
| { |
| u8 buf[] = { val >> 8, val }, page = REG2PAGE(reg); |
| |
| if (priv->current_page != page) { |
| dm_i2c_reg_write(priv->chip, REG_CURRENT_PAGE, page); |
| priv->current_page = page; |
| } |
| dm_i2c_write(priv->chip, REG2ADDR(reg), buf, 2); |
| } |
| |
| static int tda19988_read_edid(struct udevice *dev, u8 *buf, int buf_size) |
| { |
| struct tda19988_priv *priv = dev_get_priv(dev); |
| int i, val = 0, offset = 0; |
| |
| /* |
| * The TDA998x has a problem when trying to read the EDID close to a |
| * HPD assertion: it needs a delay of 100ms to avoid timing out while |
| * trying to read EDID data. |
| */ |
| mdelay(120); |
| |
| if (priv->revision == TDA19988) |
| tda19988_register_clear(priv, REG_TX4, TX4_PD_RAM); |
| |
| while (offset < buf_size) { |
| tda19988_register_write(priv, REG_DDC_ADDR, 0xa0); |
| tda19988_register_write(priv, REG_DDC_OFFS, offset); |
| tda19988_register_write(priv, REG_DDC_SEGM_ADDR, 0x60); |
| tda19988_register_write(priv, REG_DDC_SEGM, 0); |
| |
| /* enable reading EDID */ |
| tda19988_register_write(priv, REG_EDID_CTRL, 1); |
| |
| /* flags must be cleared by software */ |
| tda19988_register_write(priv, REG_EDID_CTRL, 0); |
| |
| /* wait for block read to complete */ |
| for (i = 300; i > 0; i--) { |
| mdelay(1); |
| val = tda19988_register_read(priv, REG_INT_FLAGS_2); |
| if (val < 0) |
| return val; |
| if (val & INT_FLAGS_2_EDID_BLK_RD) |
| break; |
| } |
| |
| if (i == 0) |
| return -ETIMEDOUT; |
| |
| priv->current_page = REG2PAGE(REG_EDID_DATA_0); |
| dm_i2c_reg_write(priv->chip, |
| REG_CURRENT_PAGE, REG2PAGE(REG_EDID_DATA_0)); |
| val = dm_i2c_read(priv->chip, |
| REG2ADDR(REG_EDID_DATA_0), buf + offset, 128); |
| offset += 128; |
| } |
| |
| if (priv->revision == TDA19988) |
| tda19988_register_set(priv, REG_TX4, TX4_PD_RAM); |
| |
| return offset; |
| } |
| |
| static int tda19988_enable(struct udevice *dev, int panel_bpp, |
| const struct display_timing *timing) |
| { |
| struct tda19988_priv *priv = dev_get_priv(dev); |
| u8 div = 148500000 / timing->pixelclock.typ, reg; |
| u16 line_clocks, lines; |
| |
| if (dev != 0) { |
| div--; |
| if (div > 3) |
| div = 3; |
| } |
| /* first disable the video ports */ |
| tda19988_register_write(priv, REG_ENA_VP_0, 0); |
| tda19988_register_write(priv, REG_ENA_VP_1, 0); |
| tda19988_register_write(priv, REG_ENA_VP_2, 0); |
| |
| /* shutdown audio */ |
| tda19988_register_write(priv, REG_ENA_AP, 0); |
| |
| line_clocks = timing->hsync_len.typ + timing->hback_porch.typ + |
| timing->hactive.typ + timing->hfront_porch.typ; |
| lines = timing->vsync_len.typ + timing->vback_porch.typ + |
| timing->vactive.typ + timing->vfront_porch.typ; |
| |
| /* mute the audio FIFO */ |
| tda19988_register_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO); |
| /* HDMI HDCP: off */ |
| tda19988_register_write(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); |
| tda19988_register_clear(priv, REG_TX33, TX33_HDMI); |
| tda19988_register_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0)); |
| |
| /* no pre-filter or interpolator */ |
| tda19988_register_write(priv, REG_HVF_CNTRL_0, HVF_CNTRL_0_PREFIL(0) | |
| HVF_CNTRL_0_INTPOL(0)); |
| tda19988_register_set(priv, REG_FEAT_POWERDOWN, |
| FEAT_POWERDOWN_PREFILT); |
| tda19988_register_write(priv, REG_VIP_CNTRL_5, VIP_CNTRL_5_SP_CNT(0)); |
| tda19988_register_write(priv, REG_VIP_CNTRL_4, |
| VIP_CNTRL_4_BLANKIT(0) | VIP_CNTRL_4_BLC(0) | |
| VIP_CNTRL_4_TST_PAT); |
| |
| tda19988_register_clear(priv, REG_PLL_SERIAL_1, |
| PLL_SERIAL_1_SRL_MAN_IZ); |
| tda19988_register_clear(priv, REG_PLL_SERIAL_3, PLL_SERIAL_3_SRL_CCIR | |
| PLL_SERIAL_3_SRL_DE); |
| |
| tda19988_register_write(priv, REG_SERIALIZER, 0); |
| tda19988_register_write(priv, REG_HVF_CNTRL_1, HVF_CNTRL_1_VQR(0)); |
| |
| tda19988_register_write(priv, REG_RPT_CNTRL, 0); |
| tda19988_register_write(priv, REG_SEL_CLK, SEL_CLK_SEL_VRF_CLK(0) | |
| SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK); |
| tda19988_register_write(priv, REG_PLL_SERIAL_2, |
| PLL_SERIAL_2_SRL_NOSC(div) | |
| PLL_SERIAL_2_SRL_PR(0)); |
| |
| /* set color matrix bypass flag: */ |
| tda19988_register_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP | |
| MAT_CONTRL_MAT_SC(1)); |
| tda19988_register_set(priv, REG_FEAT_POWERDOWN, FEAT_POWERDOWN_CSC); |
| |
| /* set BIAS tmds value: */ |
| tda19988_register_write(priv, REG_ANA_GENERAL, 0x09); |
| |
| /* |
| * Sync on rising HSYNC/VSYNC |
| */ |
| reg = VIP_CNTRL_3_SYNC_HS; |
| |
| /* |
| * TDA19988 requires high-active sync at input stage, |
| * so invert low-active sync provided by master encoder here |
| */ |
| if (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) |
| reg |= VIP_CNTRL_3_H_TGL; |
| if (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) |
| reg |= VIP_CNTRL_3_V_TGL; |
| tda19988_register_write(priv, REG_VIP_CNTRL_3, reg); |
| |
| tda19988_register_write(priv, REG_VIDFORMAT, 0x00); |
| tda19988_register_write16(priv, REG_REFPIX_MSB, |
| timing->hfront_porch.typ + 3); |
| tda19988_register_write16(priv, REG_REFLINE_MSB, |
| timing->vfront_porch.typ + 1); |
| tda19988_register_write16(priv, REG_NPIX_MSB, line_clocks); |
| tda19988_register_write16(priv, REG_NLINE_MSB, lines); |
| tda19988_register_write16(priv, REG_VS_LINE_STRT_1_MSB, |
| timing->vfront_porch.typ); |
| tda19988_register_write16(priv, REG_VS_PIX_STRT_1_MSB, |
| timing->hfront_porch.typ); |
| tda19988_register_write16(priv, REG_VS_LINE_END_1_MSB, |
| timing->vfront_porch.typ + |
| timing->vsync_len.typ); |
| tda19988_register_write16(priv, REG_VS_PIX_END_1_MSB, |
| timing->hfront_porch.typ); |
| tda19988_register_write16(priv, REG_VS_LINE_STRT_2_MSB, 0); |
| tda19988_register_write16(priv, REG_VS_PIX_STRT_2_MSB, 0); |
| tda19988_register_write16(priv, REG_VS_LINE_END_2_MSB, 0); |
| tda19988_register_write16(priv, REG_VS_PIX_END_2_MSB, 0); |
| tda19988_register_write16(priv, REG_HS_PIX_START_MSB, |
| timing->hfront_porch.typ); |
| tda19988_register_write16(priv, REG_HS_PIX_STOP_MSB, |
| timing->hfront_porch.typ + |
| timing->hsync_len.typ); |
| tda19988_register_write16(priv, REG_VWIN_START_1_MSB, |
| lines - timing->vactive.typ - 1); |
| tda19988_register_write16(priv, REG_VWIN_END_1_MSB, lines - 1); |
| tda19988_register_write16(priv, REG_VWIN_START_2_MSB, 0); |
| tda19988_register_write16(priv, REG_VWIN_END_2_MSB, 0); |
| tda19988_register_write16(priv, REG_DE_START_MSB, |
| line_clocks - timing->hactive.typ); |
| tda19988_register_write16(priv, REG_DE_STOP_MSB, line_clocks); |
| |
| if (priv->revision == TDA19988) { |
| /* let incoming pixels fill the active space (if any) */ |
| tda19988_register_write(priv, REG_ENABLE_SPACE, 0x00); |
| } |
| |
| /* |
| * Always generate sync polarity relative to input sync and |
| * revert input stage toggled sync at output stage |
| */ |
| reg = TBG_CNTRL_1_DWIN_DIS | TBG_CNTRL_1_TGL_EN; |
| if (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) |
| reg |= TBG_CNTRL_1_H_TGL; |
| if (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) |
| reg |= TBG_CNTRL_1_V_TGL; |
| tda19988_register_write(priv, REG_TBG_CNTRL_1, reg); |
| |
| /* must be last register set: */ |
| tda19988_register_write(priv, REG_TBG_CNTRL_0, 0); |
| |
| /* turn on HDMI HDCP */ |
| reg &= ~TBG_CNTRL_1_DWIN_DIS; |
| tda19988_register_write(priv, REG_TBG_CNTRL_1, reg); |
| tda19988_register_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1)); |
| tda19988_register_set(priv, REG_TX33, TX33_HDMI); |
| |
| mdelay(400); |
| |
| /* enable video ports */ |
| tda19988_register_write(priv, REG_ENA_VP_0, 0xff); |
| tda19988_register_write(priv, REG_ENA_VP_1, 0xff); |
| tda19988_register_write(priv, REG_ENA_VP_2, 0xff); |
| /* set muxing after enabling ports: */ |
| tda19988_register_write(priv, REG_VIP_CNTRL_0, |
| VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3)); |
| tda19988_register_write(priv, REG_VIP_CNTRL_1, |
| VIP_CNTRL_1_SWAP_C(4) | VIP_CNTRL_1_SWAP_D(5)); |
| tda19988_register_write(priv, REG_VIP_CNTRL_2, |
| VIP_CNTRL_2_SWAP_E(0) | VIP_CNTRL_2_SWAP_F(1)); |
| |
| return 0; |
| } |
| |
| struct dm_display_ops tda19988_ops = { |
| .read_edid = tda19988_read_edid, |
| .enable = tda19988_enable, |
| }; |
| |
| static const struct udevice_id tda19988_ids[] = { |
| { .compatible = "nxp,tda998x" }, |
| { } |
| }; |
| |
| static int tda19988_probe(struct udevice *dev) |
| { |
| u8 cec_addr, chip_addr, rev_lo, rev_hi; |
| int err; |
| struct tda19988_priv *priv = dev_get_priv(dev); |
| |
| chip_addr = dev_read_addr(dev); |
| /* CEC I2C address is using TDA19988 I2C address configuration pins */ |
| cec_addr = 0x34 + (chip_addr & 0x03); |
| |
| err = i2c_get_chip_for_busnum(0, cec_addr, 1, &priv->cec_chip); |
| if (err) { |
| printf("cec i2c_get_chip_for_busnum returned %d\n", err); |
| return err; |
| } |
| |
| err = i2c_get_chip_for_busnum(0, chip_addr, 1, &priv->chip); |
| if (err) { |
| printf("i2c_get_chip_for_busnum returned %d\n", err); |
| return err; |
| } |
| |
| priv->current_page = 0xff; |
| |
| /* wake up device */ |
| dm_i2c_reg_write(priv->cec_chip, TDA19988_CEC_ENAMODS, |
| CEC_ENAMODS_EN_RXSENS | CEC_ENAMODS_EN_HDMI); |
| |
| /* reset audio and I2C master */ |
| tda19988_register_write(priv, REG_SOFTRESET, |
| SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); |
| mdelay(50); |
| tda19988_register_write(priv, REG_SOFTRESET, 0); |
| mdelay(50); |
| |
| /* reset transmitter */ |
| tda19988_register_set(priv, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); |
| tda19988_register_clear(priv, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); |
| |
| /* PLL registers common configuration */ |
| tda19988_register_write(priv, REG_PLL_SERIAL_1, 0x00); |
| tda19988_register_write(priv, REG_PLL_SERIAL_2, |
| PLL_SERIAL_2_SRL_NOSC(1)); |
| tda19988_register_write(priv, REG_PLL_SERIAL_3, 0x00); |
| tda19988_register_write(priv, REG_SERIALIZER, 0x00); |
| tda19988_register_write(priv, REG_BUFFER_OUT, 0x00); |
| tda19988_register_write(priv, REG_PLL_SCG1, 0x00); |
| tda19988_register_write(priv, REG_AUDIO_DIV, AUDIO_DIV_SERCLK_8); |
| tda19988_register_write(priv, REG_SEL_CLK, |
| SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK); |
| tda19988_register_write(priv, REG_PLL_SCGN1, 0xfa); |
| tda19988_register_write(priv, REG_PLL_SCGN2, 0x00); |
| tda19988_register_write(priv, REG_PLL_SCGR1, 0x5b); |
| tda19988_register_write(priv, REG_PLL_SCGR2, 0x00); |
| tda19988_register_write(priv, REG_PLL_SCG2, 0x10); |
| |
| /* Write the default value MUX register */ |
| tda19988_register_write(priv, REG_MUX_VP_VIP_OUT, 0x24); |
| |
| /* read version */ |
| rev_lo = dm_i2c_reg_read(priv->chip, REG_VERSION_LSB); |
| rev_hi = dm_i2c_reg_read(priv->chip, REG_VERSION_MSB); |
| |
| /* mask off feature bits */ |
| priv->revision = ((rev_hi << 8) | rev_lo) & ~0x30; |
| |
| printf("HDMI: "); |
| switch (priv->revision) { |
| case TDA9989N2: |
| printf("TDA9989 n2\n"); |
| break; |
| case TDA19989: |
| printf("TDA19989\n"); |
| break; |
| case TDA19989N2: |
| printf("TDA19989 n2\n"); |
| break; |
| case TDA19988: |
| printf("TDA19988\n"); |
| break; |
| default: |
| printf("unknown TDA device: 0x%04x\n", priv->revision); |
| return -ENXIO; |
| } |
| |
| /* after reset, enable DDC */ |
| tda19988_register_write(priv, REG_DDC_DISABLE, 0x00); |
| |
| /* set clock on DDC channel */ |
| tda19988_register_write(priv, REG_TX3, 39); |
| |
| /* if necessary, disable multi-master */ |
| if (priv->revision == TDA19989) |
| tda19988_register_set(priv, REG_I2C_MASTER, I2C_MASTER_DIS_MM); |
| |
| dm_i2c_reg_write(priv->cec_chip, REG_CEC_FRO_IM_CLK_CTRL, |
| CEC_FRO_IM_CLK_CTRL_GHOST_DIS | |
| CEC_FRO_IM_CLK_CTRL_IMCLK_SEL); |
| /* ensure interrupts are disabled */ |
| dm_i2c_reg_write(priv->cec_chip, REG_CEC_RXSHPDINTENA, 0); |
| /* clear pending interrupts */ |
| dm_i2c_reg_read(priv->cec_chip, REG_CEC_RXSHPDINT); |
| tda19988_register_read(priv, REG_INT_FLAGS_0); |
| tda19988_register_read(priv, REG_INT_FLAGS_1); |
| tda19988_register_read(priv, REG_INT_FLAGS_2); |
| |
| /* enable EDID read irq */ |
| tda19988_register_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD); |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(tda19988) = { |
| .name = "tda19988", |
| .id = UCLASS_DISPLAY, |
| .of_match = tda19988_ids, |
| .ops = &tda19988_ops, |
| .probe = tda19988_probe, |
| .priv_auto_alloc_size = sizeof(struct tda19988_priv), |
| }; |
