blob: b9a026abb5c5b9e985558a004736fa8eaa37f24f [file] [log] [blame]
if ARCH_ROCKCHIP
config ROCKCHIP_RK3036
bool "Support Rockchip RK3036"
select CPU_V7A
select SUPPORT_SPL
select SPL
imply USB_FUNCTION_ROCKUSB
imply CMD_ROCKUSB
help
The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
including NEON and GPU, Mali-400 graphics, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
config ROCKCHIP_RK3128
bool "Support Rockchip RK3128"
select CPU_V7A
help
The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
including NEON and GPU, Mali-400 graphics, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
config ROCKCHIP_RK3188
bool "Support Rockchip RK3188"
select CPU_V7A
select SPL_BOARD_INIT if SPL
select SUPPORT_SPL
select SPL
select SPL_CLK
select SPL_REGMAP
select SPL_SYSCON
select SPL_RAM
select SPL_DRIVERS_MISC_SUPPORT
select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
select DEBUG_UART_BOARD_INIT
select BOARD_LATE_INIT
select ROCKCHIP_BROM_HELPER
help
The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9
including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
video interfaces, several memory options and video codec support.
Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S,
UART, SPI, I2C and PWMs.
config ROCKCHIP_RK322X
bool "Support Rockchip RK3228/RK3229"
select CPU_V7A
select SUPPORT_SPL
select SPL
select ROCKCHIP_BROM_HELPER
select DEBUG_UART_BOARD_INIT
help
The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7
including NEON and GPU, Mali-400 graphics, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
config ROCKCHIP_RK3288
bool "Support Rockchip RK3288"
select CPU_V7A
select SPL_BOARD_INIT if SPL
select SUPPORT_SPL
select SPL
imply USB_FUNCTION_ROCKUSB
imply CMD_ROCKUSB
help
The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
if ROCKCHIP_RK3288
config TPL_TEXT_BASE
default 0xff704000
config TPL_MAX_SIZE
default 32768
endif
config ROCKCHIP_RK3328
bool "Support Rockchip RK3328"
select ARM64
help
The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
config ROCKCHIP_RK3368
bool "Support Rockchip RK3368"
select ARM64
select SUPPORT_SPL
select SUPPORT_TPL
select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL
select TPL_NEEDS_SEPARATE_STACK if TPL
imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
imply TPL_SERIAL_SUPPORT
select DEBUG_UART_BOARD_INIT
help
The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
into a big and little cluster with 4 cores each) Cortex-A53 including
AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache
(for the little cluster), PowerVR G6110 based graphics, one video
output processor supporting LVDS/HDMI/eDP, several DDR3 options and
video codec support.
On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO,
I2S, UARTs, SPI, I2C and PWMs.
if ROCKCHIP_RK3368
config TPL_TEXT_BASE
default 0xff8c1000
config TPL_MAX_SIZE
default 28672
config TPL_STACK
default 0xff8cffff
endif
config ROCKCHIP_RK3399
bool "Support Rockchip RK3399"
select ARM64
select SUPPORT_SPL
select SPL
select SPL_SEPARATE_BSS
select SPL_SERIAL_SUPPORT
select SPL_DRIVERS_MISC_SUPPORT
select DEBUG_UART_BOARD_INIT
select BOARD_LATE_INIT
select ROCKCHIP_BROM_HELPER
help
The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
and quad-core Cortex-A53.
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
config ROCKCHIP_RV1108
bool "Support Rockchip RV1108"
select CPU_V7A
help
The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
and a DSP.
config ROCKCHIP_USB_UART
bool "Route uart output to usb pins"
help
Rockchip SoCs have the ability to route the signals of the debug
uart through the d+ and d- pins of a specific usb phy to enable
some form of closed-case debugging. With this option supported
SoCs will enable this routing as a debug measure.
config SPL_ROCKCHIP_BACK_TO_BROM
bool "SPL returns to bootrom"
default y if ROCKCHIP_RK3036
select ROCKCHIP_BROM_HELPER
depends on SPL
help
Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
SPL will return to the boot rom, which will then load the U-Boot
binary to keep going on.
config TPL_ROCKCHIP_BACK_TO_BROM
bool "TPL returns to bootrom"
default y if ROCKCHIP_RK3368
select ROCKCHIP_BROM_HELPER
depends on TPL
help
Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
SPL will return to the boot rom, which will then load the U-Boot
binary to keep going on.
config ROCKCHIP_BOOT_MODE_REG
hex "Rockchip boot mode flag register address"
default 0x200081c8 if ROCKCHIP_RK3036
default 0x20004040 if ROCKCHIP_RK3188
default 0x110005c8 if ROCKCHIP_RK322X
default 0xff730094 if ROCKCHIP_RK3288
default 0xff738200 if ROCKCHIP_RK3368
default 0xff320300 if ROCKCHIP_RK3399
default 0x10300580 if ROCKCHIP_RV1108
default 0
help
The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h)
according to the value from this register.
config ROCKCHIP_SPL_RESERVE_IRAM
hex "Size of IRAM reserved in SPL"
default 0
help
SPL may need reserve memory for firmware loaded by SPL, whose load
address is in IRAM and may overlay with SPL text area if not
reserved.
config ROCKCHIP_BROM_HELPER
bool
config SPL_ROCKCHIP_EARLYRETURN_TO_BROM
bool "SPL requires early-return (for RK3188-style BROM) to BROM"
depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK
help
Some Rockchip BROM variants (e.g. on the RK3188) load the
first stage in segments and enter multiple times. E.g. on
the RK3188, the first 1KB of the first stage are loaded
first and entered; after returning to the BROM, the
remainder of the first stage is loaded, but the BROM
re-enters at the same address/to the same code as previously.
This enables support code in the BOOT0 hook for the SPL stage
to allow multiple entries.
config TPL_ROCKCHIP_EARLYRETURN_TO_BROM
bool "TPL requires early-return (for RK3188-style BROM) to BROM"
depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK
help
Some Rockchip BROM variants (e.g. on the RK3188) load the
first stage in segments and enter multiple times. E.g. on
the RK3188, the first 1KB of the first stage are loaded
first and entered; after returning to the BROM, the
remainder of the first stage is loaded, but the BROM
re-enters at the same address/to the same code as previously.
This enables support code in the BOOT0 hook for the TPL stage
to allow multiple entries.
config SPL_MMC_SUPPORT
default y if !SPL_ROCKCHIP_BACK_TO_BROM
source "arch/arm/mach-rockchip/rk3036/Kconfig"
source "arch/arm/mach-rockchip/rk3128/Kconfig"
source "arch/arm/mach-rockchip/rk3188/Kconfig"
source "arch/arm/mach-rockchip/rk322x/Kconfig"
source "arch/arm/mach-rockchip/rk3288/Kconfig"
source "arch/arm/mach-rockchip/rk3328/Kconfig"
source "arch/arm/mach-rockchip/rk3368/Kconfig"
source "arch/arm/mach-rockchip/rk3399/Kconfig"
source "arch/arm/mach-rockchip/rv1108/Kconfig"
endif