| /* |
| * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx7d.dtsi" |
| |
| / { |
| model = "Freescale i.MX7 LPDDR3 12x12 ARM2 Board"; |
| compatible = "fsl,imx7d-12x12-lpddr3-arm2", "fsl,imx7d"; |
| |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| status = "okay"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| pinctrl-1 = <&pinctrl_gpio_keys_sleep>; |
| |
| volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| }; |
| |
| pxp_v4l2_out { |
| compatible = "fsl,imx7d-pxp-v4l2", "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2"; |
| status = "okay"; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg_aud_1v8: aud_1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "AUD_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can1_3v3: can1-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "can1-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_can2_3v3: can2-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "can2-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_coedc_5v: coedc_5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "CODEC_5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sd1_vmmc: sd1_vmmc{ |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_SD1"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_sd2_vmmc: sd2_vmmc{ |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_SD2"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg1_vbus: regulator@0 { |
| compatible = "regulator-fixed"; |
| reg = <0>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_vref_1v8: regulator@2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on { |
| compatible = "regulator-fixed"; |
| regulator-name = "mipi_dsi_pwr_on"; |
| gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| memory { |
| reg = <0x80000000 0x80000000>; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &cpu0 { |
| arm-supply = <&sw1a_reg>; |
| }; |
| |
| &epdc { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_epdc_0>; |
| pinctrl-1 = <&pinctrl_epdc_0>; |
| V3P3-supply = <&V3P3_reg>; |
| VCOM-supply = <&VCOM_reg>; |
| DISPLAY-supply = <&DISPLAY_reg>; |
| status = "okay"; |
| }; |
| |
| &epxp { |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| fsl,spi-num-chipselects = <1>; |
| cs-gpios = <&gpio4 19 0>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_cs_1>; |
| pinctrl-1 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_cs_1>; |
| status = "disabled"; |
| |
| spi_flash1: m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,m25p32"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| pinctrl-1 = <&pinctrl_enet1>; |
| assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy1>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@5 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <5>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| pinctrl-1 = <&pinctrl_enet2>; |
| pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>; |
| assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET2_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "disabled"; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| pinctrl-1 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can1_3v3>; |
| status = "disabled"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| pinctrl-1 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can2_3v3>; |
| status = "disabled"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "sleep", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1_1>; |
| pinctrl-1 = <&pinctrl_i2c1_1>; |
| pinctrl-2 = <&pinctrl_i2c1_1_gpio>; |
| scl-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| pmic: pfuze3000@08 { |
| compatible = "fsl,pfuze3000"; |
| reg = <0x08>; |
| fsl,lpsr-mode; |
| |
| regulators { |
| sw1a_reg: sw1a { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| sw1c_reg: sw1b { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1650000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vldo2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vccsd { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: v33 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vldo3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vldo4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default", "sleep", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c3_1>; |
| pinctrl-1 = <&pinctrl_i2c3_1>; |
| pinctrl-2 = <&pinctrl_i2c3_1_gpio>; |
| scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; |
| sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| max7322: gpio@68 { |
| compatible = "maxim,max7322"; |
| reg = <0x68>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| max17135@48 { |
| compatible = "maxim,max17135"; |
| reg = <0x48>; |
| vneg_pwrup = <1>; |
| gvee_pwrup = <2>; |
| vpos_pwrup = <10>; |
| gvdd_pwrup = <12>; |
| gvdd_pwrdn = <1>; |
| vpos_pwrdn = <2>; |
| gvee_pwrdn = <8>; |
| vneg_pwrdn = <10>; |
| gpio_pmic_pwrgood = <&gpio2 31 0>; |
| gpio_pmic_vcom_ctrl = <&gpio4 14 0>; |
| gpio_pmic_wakeup = <&gpio4 23 0>; |
| gpio_pmic_v3p3 = <&gpio4 20 0>; |
| gpio_pmic_intr = <&gpio4 18 0>; |
| |
| regulators { |
| DISPLAY_reg: DISPLAY { |
| regulator-name = "DISPLAY"; |
| }; |
| |
| GVDD_reg: GVDD { |
| /* 20v */ |
| regulator-name = "GVDD"; |
| }; |
| |
| GVEE_reg: GVEE { |
| /* -22v */ |
| regulator-name = "GVEE"; |
| }; |
| |
| HVINN_reg: HVINN { |
| /* -22v */ |
| regulator-name = "HVINN"; |
| }; |
| |
| HVINP_reg: HVINP { |
| /* 20v */ |
| regulator-name = "HVINP"; |
| }; |
| |
| VCOM_reg: VCOM { |
| regulator-name = "VCOM"; |
| /* 2's-compliment, -4325000 */ |
| regulator-min-microvolt = <0xffbe0178>; |
| /* 2's-compliment, -500000 */ |
| regulator-max-microvolt = <0xfff85ee0>; |
| }; |
| |
| VNEG_reg: VNEG { |
| /* -15v */ |
| regulator-name = "VNEG"; |
| }; |
| |
| VPOS_reg: VPOS { |
| /* 15v */ |
| regulator-name = "VPOS"; |
| }; |
| |
| V3P3_reg: V3P3 { |
| regulator-name = "V3P3"; |
| }; |
| }; |
| }; |
| |
| codec: wm8958@1a { |
| compatible = "wlf,wm8958"; |
| reg = <0x1a>; |
| clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "mclk1", "mclk2"; |
| |
| DBVDD1-supply = <®_aud_1v8>; |
| DBVDD2-supply = <®_aud_1v8>; |
| DBVDD3-supply = <®_aud_1v8>; |
| AVDD2-supply = <®_aud_1v8>; |
| CPVDD-supply = <®_aud_1v8>; |
| SPKVDD1-supply = <®_coedc_5v>; |
| SPKVDD2-supply = <®_coedc_5v>; |
| wlf,ldo1ena; |
| wlf,ldo2ena; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_hog_1 &pinctrl_hog_sd2_vselect &pinctrl_hog_mipi>; |
| pinctrl-1 = <&pinctrl_hog_1 &pinctrl_hog_sd2_vselect &pinctrl_hog_mipi>; |
| |
| imx7d-12x12-lpddr3-arm2 { |
| |
| pinctrl_bt: btgrp-1 { |
| fsl,pins = < |
| MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x80000000 /* BT REG on */ |
| >; |
| }; |
| |
| pinctrl_ecspi1_cs_1: ecspi1_cs_grp-1 { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x2 |
| >; |
| }; |
| |
| pinctrl_ecspi1_1: ecspi1grp-1 { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 |
| MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 |
| MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 |
| MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 |
| MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 |
| MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 |
| MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 |
| MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 |
| MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 |
| MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 |
| MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 |
| MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 |
| MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 |
| MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 |
| MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 |
| >; |
| }; |
| |
| pinctrl_epdc_0: epdcgrp-0 { |
| fsl,pins = < |
| MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x2 |
| MX7D_PAD_EPDC_DATA01__EPDC_DATA1 0x2 |
| MX7D_PAD_EPDC_DATA02__EPDC_DATA2 0x2 |
| MX7D_PAD_EPDC_DATA03__EPDC_DATA3 0x2 |
| MX7D_PAD_EPDC_DATA04__EPDC_DATA4 0x2 |
| MX7D_PAD_EPDC_DATA05__EPDC_DATA5 0x2 |
| MX7D_PAD_EPDC_DATA06__EPDC_DATA6 0x2 |
| MX7D_PAD_EPDC_DATA07__EPDC_DATA7 0x2 |
| MX7D_PAD_EPDC_DATA08__EPDC_DATA8 0x2 |
| MX7D_PAD_EPDC_DATA09__EPDC_DATA9 0x2 |
| MX7D_PAD_EPDC_DATA10__EPDC_DATA10 0x2 |
| MX7D_PAD_EPDC_DATA11__EPDC_DATA11 0x2 |
| MX7D_PAD_EPDC_DATA12__EPDC_DATA12 0x2 |
| MX7D_PAD_EPDC_DATA13__EPDC_DATA13 0x2 |
| MX7D_PAD_EPDC_DATA14__EPDC_DATA14 0x2 |
| MX7D_PAD_EPDC_DATA15__EPDC_DATA15 0x2 |
| MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK 0x2 |
| MX7D_PAD_EPDC_SDLE__EPDC_SDLE 0x2 |
| MX7D_PAD_EPDC_SDOE__EPDC_SDOE 0x2 |
| MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR 0x2 |
| MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 0x2 |
| MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 0x2 |
| MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 0x2 |
| MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 0x2 |
| MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK 0x2 |
| MX7D_PAD_EPDC_GDOE__EPDC_GDOE 0x2 |
| MX7D_PAD_EPDC_GDRL__EPDC_GDRL 0x2 |
| MX7D_PAD_EPDC_GDSP__EPDC_GDSP 0x2 |
| MX7D_PAD_EPDC_BDR0__EPDC_BDR0 0x2 |
| MX7D_PAD_EPDC_BDR1__EPDC_BDR1 0x2 |
| MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x80000000 /* pwr int */ |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x59 |
| MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x59 |
| MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x59 /* STBY */ |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x59 |
| MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x59 |
| MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x59 /* STBY */ |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpio_keysgrp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x32 |
| MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x32 |
| >; |
| }; |
| |
| pinctrl_gpio_keys_sleep: gpio_keysgrp_sleep { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 |
| MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 |
| >; |
| }; |
| |
| pinctrl_hog_1: hoggrp-1 { |
| fsl,pins = < |
| MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x80000000 |
| MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x80000000 |
| MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x80000000 |
| MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x80000000 |
| MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x80000000 |
| MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x80000000 |
| MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 |
| MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 |
| MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 |
| MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 |
| MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 |
| MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x59 |
| MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 |
| >; |
| }; |
| |
| pinctrl_hog_mipi: hoggrp_mipi { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x59 |
| MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x59 |
| >; |
| }; |
| |
| pinctrl_hog_sd2_vselect: hoggrp_sd2vselect { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x59 |
| >; |
| }; |
| |
| pinctrl_hog_headphone_det: hoggrp_headphone_det { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 |
| >; |
| }; |
| |
| pinctrl_i2c1_1: i2c1grp-1 { |
| fsl,pins = < |
| MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f |
| MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c1_1_gpio: i2c1grp-1-gpio { |
| fsl,pins = < |
| MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x7f |
| MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x7f |
| >; |
| }; |
| |
| pinctrl_i2c2_1: i2c2grp-1 { |
| fsl,pins = < |
| MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c3_1: i2c3grp-1 { |
| fsl,pins = < |
| MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f |
| MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c3_1_gpio: i2c3grp-1-gpio { |
| fsl,pins = < |
| MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x7f |
| MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x7f |
| >; |
| }; |
| |
| pinctrl_i2c4_1: i2c4grp-1 { |
| fsl,pins = < |
| MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f |
| MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_lcdif_dat: lcdifdatgrp { |
| fsl,pins = < |
| MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 |
| MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 |
| MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 |
| MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 |
| MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 |
| MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 |
| MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 |
| MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 |
| MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 |
| MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 |
| MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 |
| MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 |
| MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 |
| MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 |
| MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 |
| MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 |
| MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 |
| MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 |
| MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 |
| MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 |
| MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 |
| MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 |
| MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 |
| MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 |
| >; |
| }; |
| |
| pinctrl_lcdif_ctrl: lcdifctrlgrp { |
| fsl,pins = < |
| MX7D_PAD_LCD_CLK__LCD_CLK 0x79 |
| MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 |
| MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 |
| MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 |
| >; |
| }; |
| |
| pinctrl_mqs: mqsgrp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT 0x0 |
| MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT 0x0 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x2 |
| MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x2 |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f |
| MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f |
| MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f |
| MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC 0x1f |
| MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f |
| MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f |
| MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f |
| MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f |
| MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0 |
| >; |
| }; |
| |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| >; |
| }; |
| |
| pinctrl_uart3_1: uart3grp-1 { |
| fsl,pins = < |
| MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 |
| MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 |
| MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79 |
| MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79 |
| >; |
| }; |
| |
| pinctrl_uart3dte_1: uart3dtegrp-1 { |
| fsl,pins = < |
| MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 |
| MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 |
| MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x79 |
| MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS 0x79 |
| >; |
| }; |
| |
| pinctrl_usdhc1_1: usdhc1grp-1 { |
| fsl,pins = < |
| MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| >; |
| }; |
| |
| pinctrl_usdhc2_1: usdhc2grp-1 { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x59 |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x19 |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 |
| >; |
| }; |
| |
| pinctrl_usdhc2_1_100mhz: usdhc2grp-1_100mhz { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x5a |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x1a |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a |
| >; |
| }; |
| |
| pinctrl_usdhc2_1_200mhz: usdhc2grp-1_200mhz { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x5b |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x1b |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b |
| >; |
| }; |
| |
| pinctrl_usdhc3_1: usdhc3grp-1 { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 |
| >; |
| }; |
| |
| pinctrl_usdhc3_1_100mhz: usdhc3grp-1_100mhz { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5a |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1a |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a |
| >; |
| }; |
| |
| pinctrl_usdhc3_1_200mhz: usdhc3grp-1_200mhz { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x5b |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x1b |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b |
| MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b |
| >; |
| }; |
| |
| pinctrl_sim1_1: sim1grp-1 { |
| fsl,pins = < |
| MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B 0x77 |
| MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD 0x77 |
| MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN 0x77 |
| MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK 0x73 |
| MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD 0x73 |
| >; |
| }; |
| |
| }; |
| }; |
| |
| &iomuxc_lpsr { |
| imx7d-12x12-lpddr3-arm2 { |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x30 |
| >; |
| }; |
| }; |
| |
| imx7d-sdb { |
| pinctrl_usbotg1_vbus: usbotg1vbusgrp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 |
| >; |
| }; |
| |
| pinctrl_usbotg2_vbus: usbotg2vbusgrp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 |
| >; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_lcdif_dat |
| &pinctrl_lcdif_ctrl>; |
| pinctrl-1 = <&pinctrl_lcdif_dat |
| &pinctrl_lcdif_ctrl>; |
| display = <&display0>; |
| status = "okay"; |
| |
| display0: display { |
| bits-per-pixel = <16>; |
| bus-width = <24>; |
| |
| display-timings { |
| native-mode = <&timing0>; |
| timing0: timing0 { |
| clock-frequency = <33500000>; |
| hactive = <800>; |
| vactive = <480>; |
| hback-porch = <89>; |
| hfront-porch = <164>; |
| vback-porch = <23>; |
| vfront-porch = <10>; |
| hsync-len = <10>; |
| vsync-len = <10>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &ocrams { |
| fsl,enable-lpsr; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio6 21 GPIO_ACTIVE_LOW>; |
| power-on-gpio = <&gpio6 19 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &sim1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_sim1_1>; |
| pinctrl-1 = <&pinctrl_sim1_1>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_uart1_1>; |
| pinctrl-1 = <&pinctrl_uart1_1>; |
| assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_uart3_1 |
| &pinctrl_bt>; |
| pinctrl-1 = <&pinctrl_uart3_1 |
| &pinctrl_bt>; |
| fsl,uart-has-rtscts; |
| assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| status = "okay"; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode;*/ |
| /* pinctrl-0 = <&pinctrl_uart3dte_1>; */ |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_vbus>; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2_vbus>; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc1_1>; |
| pinctrl-1 = <&pinctrl_usdhc1_1>; |
| cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| vmmc-supply = <®_sd1_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc2_1>; |
| pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>; |
| pinctrl-3 = <&pinctrl_usdhc2_1>; |
| cd-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| vmmc-supply = <®_sd2_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc3_1>; |
| pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; |
| pinctrl-3 = <&pinctrl_usdhc3_1>; |
| assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| non-removable; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,wdog_b; |
| }; |
