| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * Copyright 2017 NXP |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "fsl-imx8-ca53.dtsi" |
| #include <dt-bindings/clock/imx8mq-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/pins-imx8mq.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "fsl,imx8mq"; |
| interrupt-parent = <&gpc>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| ethernet0 = &fec1; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| i2c3 = &i2c4; |
| usb0 = &usb3_0; |
| usb1 = &usb3_1; |
| spi0 = &qspi; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x40000000 0 0xc0000000>; |
| }; |
| |
| gic: interrupt-controller@38800000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ |
| <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | |
| IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | |
| IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | |
| IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | |
| IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ |
| clock-frequency = <8333333>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| power: power-controller { |
| compatible = "fsl,imx8mq-pm-domain"; |
| num-domains = <11>; |
| #power-domain-cells = <1>; |
| }; |
| |
| pwm2: pwm@30670000 { |
| compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; |
| reg = <0x0 0x30670000 0x0 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, |
| <&clk IMX8MQ_CLK_PWM2_ROOT>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@30200000 { |
| compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; |
| reg = <0x0 0x30200000 0x0 0x10000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@30210000 { |
| compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; |
| reg = <0x0 0x30210000 0x0 0x10000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@30220000 { |
| compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; |
| reg = <0x0 0x30220000 0x0 0x10000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@30230000 { |
| compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; |
| reg = <0x0 0x30230000 0x0 0x10000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio5: gpio@30240000 { |
| compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; |
| reg = <0x0 0x30240000 0x0 0x10000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| tmu: tmu@30260000 { |
| compatible = "fsl,imx8mq-tmu"; |
| reg = <0x0 0x30260000 0x0 0x10000>; |
| interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| little-endian; |
| u-boot,dm-pre-reloc; |
| fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; |
| fsl,tmu-calibration = <0x00000000 0x00000023 |
| 0x00000001 0x00000029 |
| 0x00000002 0x0000002f |
| 0x00000003 0x00000035 |
| 0x00000004 0x0000003d |
| 0x00000005 0x00000043 |
| 0x00000006 0x0000004b |
| 0x00000007 0x00000051 |
| 0x00000008 0x00000057 |
| 0x00000009 0x0000005f |
| 0x0000000a 0x00000067 |
| 0x0000000b 0x0000006f |
| |
| 0x00010000 0x0000001b |
| 0x00010001 0x00000023 |
| 0x00010002 0x0000002b |
| 0x00010003 0x00000033 |
| 0x00010004 0x0000003b |
| 0x00010005 0x00000043 |
| 0x00010006 0x0000004b |
| 0x00010007 0x00000055 |
| 0x00010008 0x0000005d |
| 0x00010009 0x00000067 |
| 0x0001000a 0x00000070 |
| |
| 0x00020000 0x00000017 |
| 0x00020001 0x00000023 |
| 0x00020002 0x0000002d |
| 0x00020003 0x00000037 |
| 0x00020004 0x00000041 |
| 0x00020005 0x0000004b |
| 0x00020006 0x00000057 |
| 0x00020007 0x00000063 |
| 0x00020008 0x0000006f |
| |
| 0x00030000 0x00000015 |
| 0x00030001 0x00000021 |
| 0x00030002 0x0000002d |
| 0x00030003 0x00000039 |
| 0x00030004 0x00000045 |
| 0x00030005 0x00000053 |
| 0x00030006 0x0000005f |
| 0x00030007 0x00000071>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| thermal-zones { |
| /* cpu thermal */ |
| cpu-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <2000>; |
| thermal-sensors = <&tmu>; |
| trips { |
| cpu_alert0: trip0 { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit0: trip1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| |
| lcdif: lcdif@30320000 { |
| compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; |
| reg = <0x0 0x30320000 0x0 0x10000>; |
| clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL_DIV>, |
| <&clk IMX8MQ_CLK_DUMMY>, |
| <&clk IMX8MQ_CLK_DUMMY>; |
| clock-names = "pix", "axi", "disp_axi"; |
| assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL_SRC>; |
| assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; |
| assigned-clock-rate = <594000000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@30330000 { |
| compatible = "fsl,imx8mq-iomuxc"; |
| reg = <0x0 0x30330000 0x0 0x10000>; |
| }; |
| |
| gpr: iomuxc-gpr@30340000 { |
| compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx7d-iomuxc-gpr", "syscon"; |
| reg = <0x0 0x30340000 0x0 0x10000>; |
| }; |
| |
| ocotp: ocotp-ctrl@30350000 { |
| compatible = "fsl,imx8mq-ocotp", "fsl,imx7d-ocotp", "syscon"; |
| reg = <0x0 0x30350000 0x0 0x10000>; |
| }; |
| |
| anatop: anatop@30360000 { |
| compatible = "fsl,imx8mq-anatop", "fsl,imx6q-anatop", |
| "syscon", "simple-bus"; |
| reg = <0x0 0x30360000 0x0 0x10000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| clk: ccm@30380000 { |
| compatible = "fsl,imx8mq-ccm"; |
| reg = <0x0 0x30380000 0x0 0x10000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <1>; |
| }; |
| |
| gpc: gpc@303a0000 { |
| compatible = "fsl,imx8mq-gpc", "fsl,imx7d-gpc", "syscon"; |
| reg = <0x0 0x303a0000 0x0 0x10000>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| uart1: serial@30860000 { |
| compatible = "fsl,imx8mq-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x0 0x30860000 0x0 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, |
| <&clk IMX8MQ_CLK_UART1_ROOT>; |
| clock-names = "ipg", "per"; |
| interrupt-parent = <&gpc>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@30880000 { |
| compatible = "fsl,imx8mq-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x0 0x30880000 0x0 0x10000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, |
| <&clk IMX8MQ_CLK_UART3_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@30890000 { |
| compatible = "fsl,imx8mq-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x0 0x30890000 0x0 0x10000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, |
| <&clk IMX8MQ_CLK_UART2_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@30a60000 { |
| compatible = "fsl,imx8mq-uart", |
| "fsl,imx6q-uart", "fsl,imx21-uart"; |
| reg = <0x0 0x30a60000 0x0 0x10000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, |
| <&clk IMX8MQ_CLK_UART4_ROOT>; |
| clock-names = "ipg", "per"; |
| dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| usb3_phy0: phy@381f0040 { |
| compatible = "fsl,imx8mq-usb-phy"; |
| #phy-cells = <1>; |
| reg = <0x0 0x381f0040 0x0 0x40>; |
| clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; |
| clock-names = "usb_phy_root_clk"; |
| assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF_SRC>; |
| assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; |
| assigned-clock-rates = <100000000>; |
| status = "disabled"; |
| }; |
| |
| usb3_0: usb@38100000 { |
| compatible = "fsl, imx8mq-dwc3"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; |
| clock-names = "usb1_ctrl_root_clk"; |
| assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS_SRC>, |
| <&clk IMX8MQ_CLK_USB_CORE_REF_SRC>; |
| assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, |
| <&clk IMX8MQ_SYS1_PLL_100M>; |
| assigned-clock-rates = <500000000>, <100000000>; |
| status = "disabled"; |
| |
| usb_dwc3_0: dwc3_0 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x38100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gpc>; |
| phys = <&usb3_phy0 0>, <&usb3_phy0 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| power-domains = <&power 2>; |
| snps,power-down-scale = <2>; |
| snps,dis_u2_susphy_quirk; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb3_phy1: phy@382f0040 { |
| compatible = "fsl,imx8mq-usb-phy"; |
| #phy-cells = <1>; |
| reg = <0x0 0x382f0040 0x0 0x40>; |
| clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; |
| clock-names = "usb_phy_root_clk"; |
| assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF_SRC>; |
| assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; |
| assigned-clock-rates = <100000000>; |
| status = "disabled"; |
| }; |
| |
| usb3_1: usb@38200000 { |
| compatible = "fsl, imx8mq-dwc3"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; |
| clock-names = "usb2_ctrl_root_clk"; |
| assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS_SRC>, |
| <&clk IMX8MQ_CLK_USB_CORE_REF_SRC>; |
| assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, |
| <&clk IMX8MQ_SYS1_PLL_100M>; |
| assigned-clock-rates = <500000000>, <100000000>; |
| status = "disabled"; |
| |
| usb_dwc3_1: dwc3_1 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x38200000 0x0 0x10000>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gpc>; |
| phys = <&usb3_phy1 0>, <&usb3_phy1 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| power-domains = <&power 3>; |
| snps,power-down-scale = <2>; |
| snps,dis_u2_susphy_quirk; |
| status = "disabled"; |
| }; |
| }; |
| |
| usdhc1: usdhc@30b40000 { |
| compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc"; |
| reg = <0x0 0x30b40000 0x0 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_DUMMY>, |
| <&clk IMX8MQ_CLK_NAND_USDHC_BUS_DIV>, |
| <&clk IMX8MQ_CLK_USDHC1_ROOT>; |
| clock-names = "ipg", "ahb", "per"; |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC1_DIV>; |
| assigned-clock-rates = <400000000>; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step= <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: usdhc@30b50000 { |
| compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc"; |
| reg = <0x0 0x30b50000 0x0 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_DUMMY>, |
| <&clk IMX8MQ_CLK_NAND_USDHC_BUS_DIV>, |
| <&clk IMX8MQ_CLK_USDHC2_ROOT>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step= <2>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sdma1: sdma@30bd0000 { |
| compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma"; |
| reg = <0x0 0x30bd0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, |
| <&clk IMX8MQ_CLK_SDMA1_ROOT>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| status = "okay"; |
| }; |
| |
| sdma2: sdma@302c0000 { |
| compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma"; |
| reg = <0x0 0x302c0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, |
| <&clk IMX8MQ_CLK_SDMA2_ROOT>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| status = "okay"; |
| }; |
| |
| fec1: ethernet@30be0000 { |
| compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; |
| reg = <0x0 0x30be0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>, |
| <&clk IMX8MQ_CLK_ENET1_ROOT>, |
| <&clk IMX8MQ_CLK_ENET_TIMER_DIV>, |
| <&clk IMX8MQ_CLK_ENET_REF_DIV>, |
| <&clk IMX8MQ_CLK_ENET_PHY_REF_DIV>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI_SRC>, |
| <&clk IMX8MQ_CLK_ENET_TIMER_SRC>, |
| <&clk IMX8MQ_CLK_ENET_REF_SRC>, |
| <&clk IMX8MQ_CLK_ENET_TIMER_DIV>; |
| assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, |
| <&clk IMX8MQ_SYS2_PLL_100M>, |
| <&clk IMX8MQ_SYS2_PLL_125M>; |
| assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; |
| stop-mode = <&gpr 0x10 3>; |
| fsl,num-tx-queues=<3>; |
| fsl,num-rx-queues=<3>; |
| fsl,wakeup_irq = <2>; |
| status = "disabled"; |
| }; |
| |
| imx_ion { |
| compatible = "fsl,mxc-ion"; |
| fsl,heap-id = <0>; |
| }; |
| |
| i2c1: i2c@30a20000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx21-i2c"; |
| reg = <0x0 0x30a20000 0x0 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@30a30000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx21-i2c"; |
| reg = <0x0 0x30a30000 0x0 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@30a40000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx21-i2c"; |
| reg = <0x0 0x30a40000 0x0 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@30a50000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx21-i2c"; |
| reg = <0x0 0x30a50000 0x0 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>; |
| status = "disabled"; |
| }; |
| |
| wdog1: wdog@30280000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0 0x30280000 0 0x10000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>; |
| status = "disabled"; |
| }; |
| |
| wdog2: wdog@30290000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0 0x30290000 0 0x10000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>; |
| status = "disabled"; |
| }; |
| |
| wdog3: wdog@302a0000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0 0x302a0000 0 0x10000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; |
| status = "disabled"; |
| }; |
| |
| dma_cap: dma_cap { |
| compatible = "dma-capability"; |
| only-dma-mask32 = <1>; |
| }; |
| |
| qspi: qspi@30bb0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-qspi"; |
| reg = <0 0x30bb0000 0 0x10000>, <0 0x08000000 0 0x10000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>, |
| <&clk IMX8MQ_CLK_QSPI_ROOT>; |
| clock-names = "qspi_en", "qspi"; |
| status = "disabled"; |
| }; |
| |
| dma_apbh: dma-apbh@33000000 { |
| compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; |
| reg = <0 0x33000000 0 0x2000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| clocks = <&clk IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| }; |
| |
| gpmi: gpmi-nand@33002000{ |
| compatible = "fsl,imx7d-gpmi-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0 0x33002000 0 0x2000>, <0 0x33004000 0 0x4000>; |
| reg-names = "gpmi-nand", "bch"; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "bch"; |
| clocks = <&clk IMX8MQ_CLK_RAWNAND_ROOT>, |
| <&clk IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| clock-names = "gpmi_io", "gpmi_bch_apb"; |
| dmas = <&dma_apbh 0>; |
| dma-names = "rx-tx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| &A53_0 { |
| #cooling-cells = <2>; |
| }; |
