| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2017 NXP Semiconductor, Inc. |
| * |
| */ |
| #ifndef __FSL_STREAM_ID_H |
| #define __FSL_STREAM_ID_H |
| |
| /* |
| * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices |
| * are not hardwired and are programmed by sw. There are a limited number |
| * of stream IDs available, and the partitioning of them is scenario |
| * dependent. This header defines the partitioning between legacy, PCI, |
| * and DPAA1 devices. |
| * |
| * This partitioning can be customized in this file depending |
| * on the specific hardware config: |
| * |
| * -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc) |
| * -all legacy devices get a unique stream ID assigned and programmed in |
| * their AMQR registers by u-boot |
| * |
| * -PCIe |
| * -there is a range of stream IDs set aside for PCI in this |
| * file. U-boot will scan the PCI bus and for each device discovered: |
| * -allocate a streamID |
| * -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID' |
| * -set a msi-map entry in the PEXn controller node in the |
| * device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt |
| * for more info on the msi-map definition) |
| * -set a iommu-map entry in the PEXn controller node in the |
| * device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt |
| * for more info on the iommu-map definition) |
| * |
| * -DPAA1 |
| * - Stream ids for DPAA1 use are reserved for future usecase. |
| * |
| */ |
| |
| |
| #define FSL_INVALID_STREAM_ID 0 |
| |
| /* legacy devices */ |
| #define FSL_USB1_STREAM_ID 1 |
| #define FSL_USB2_STREAM_ID 2 |
| #define FSL_USB3_STREAM_ID 3 |
| #define FSL_SDHC_STREAM_ID 4 |
| #define FSL_SATA_STREAM_ID 5 |
| #define FSL_QE_STREAM_ID 6 |
| #define FSL_QDMA_STREAM_ID 7 |
| #define FSL_EDMA_STREAM_ID 8 |
| #define FSL_ETR_STREAM_ID 9 |
| #define FSL_DEBUG_STREAM_ID 10 |
| |
| /* PCI - programmed in PEXn_LUT */ |
| #define FSL_PEX_STREAM_ID_START 11 |
| #define FSL_PEX_STREAM_ID_END 26 |
| |
| /* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */ |
| #define FSL_DPAA1_STREAM_ID_START 27 |
| #define FSL_DPAA1_STREAM_ID_END 63 |
| |
| #endif |
