| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2018 NXP |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| */ |
| |
| #ifndef __FSL_SERDES_H__ |
| #define __FSL_SERDES_H__ |
| |
| #include <config.h> |
| |
| #ifdef CONFIG_FSL_LSCH3 |
| enum srds_prtcl { |
| /* |
| * Nobody will check whether the device 'NONE' has been configured, |
| * So use it to indicate if the serdes_prtcl_map has been initialized. |
| */ |
| NONE = 0, |
| PCIE1, |
| PCIE2, |
| PCIE3, |
| PCIE4, |
| PCIE5, |
| PCIE6, |
| SATA1, |
| SATA2, |
| SATA3, |
| SATA4, |
| XAUI1, |
| XAUI2, |
| XFI1, |
| XFI2, |
| XFI3, |
| XFI4, |
| XFI5, |
| XFI6, |
| XFI7, |
| XFI8, |
| XFI9, |
| XFI10, |
| XFI11, |
| XFI12, |
| XFI13, |
| XFI14, |
| SGMII1, |
| SGMII2, |
| SGMII3, |
| SGMII4, |
| SGMII5, |
| SGMII6, |
| SGMII7, |
| SGMII8, |
| SGMII9, |
| SGMII10, |
| SGMII11, |
| SGMII12, |
| SGMII13, |
| SGMII14, |
| SGMII15, |
| SGMII16, |
| SGMII17, |
| SGMII18, |
| QSGMII_A, |
| QSGMII_B, |
| QSGMII_C, |
| QSGMII_D, |
| _25GE1, |
| _25GE2, |
| _25GE3, |
| _25GE4, |
| _25GE5, |
| _25GE6, |
| _25GE7, |
| _25GE8, |
| _25GE9, |
| _25GE10, |
| _40GE1, |
| _40GE2, |
| _50GE1, |
| _50GE2, |
| _100GE1, |
| _100GE2, |
| SERDES_PRCTL_COUNT |
| }; |
| |
| enum srds { |
| FSL_SRDS_1 = 0, |
| FSL_SRDS_2 = 1, |
| NXP_SRDS_3 = 2, |
| }; |
| #elif defined(CONFIG_FSL_LSCH2) |
| enum srds_prtcl { |
| /* |
| * Nobody will check whether the device 'NONE' has been configured, |
| * So use it to indicate if the serdes_prtcl_map has been initialized. |
| */ |
| NONE = 0, |
| PCIE1, |
| PCIE2, |
| PCIE3, |
| PCIE4, |
| SATA1, |
| SATA2, |
| SRIO1, |
| SRIO2, |
| SGMII_FM1_DTSEC1, |
| SGMII_FM1_DTSEC2, |
| SGMII_FM1_DTSEC3, |
| SGMII_FM1_DTSEC4, |
| SGMII_FM1_DTSEC5, |
| SGMII_FM1_DTSEC6, |
| SGMII_FM1_DTSEC9, |
| SGMII_FM1_DTSEC10, |
| SGMII_FM2_DTSEC1, |
| SGMII_FM2_DTSEC2, |
| SGMII_FM2_DTSEC3, |
| SGMII_FM2_DTSEC4, |
| SGMII_FM2_DTSEC5, |
| SGMII_FM2_DTSEC6, |
| SGMII_FM2_DTSEC9, |
| SGMII_FM2_DTSEC10, |
| SGMII_TSEC1, |
| SGMII_TSEC2, |
| SGMII_TSEC3, |
| SGMII_TSEC4, |
| XAUI_FM1, |
| XAUI_FM2, |
| AURORA, |
| CPRI1, |
| CPRI2, |
| CPRI3, |
| CPRI4, |
| CPRI5, |
| CPRI6, |
| CPRI7, |
| CPRI8, |
| XAUI_FM1_MAC9, |
| XAUI_FM1_MAC10, |
| XAUI_FM2_MAC9, |
| XAUI_FM2_MAC10, |
| HIGIG_FM1_MAC9, |
| HIGIG_FM1_MAC10, |
| HIGIG_FM2_MAC9, |
| HIGIG_FM2_MAC10, |
| QSGMII_FM1_A, /* A indicates MACs 1,2,5,6 */ |
| QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ |
| QSGMII_FM2_A, |
| QSGMII_FM2_B, |
| XFI_FM1_MAC1, |
| XFI_FM1_MAC2, |
| XFI_FM1_MAC9, |
| XFI_FM1_MAC10, |
| XFI_FM2_MAC9, |
| XFI_FM2_MAC10, |
| INTERLAKEN, |
| QSGMII_SW1_A, /* Indicates ports on L2 Switch */ |
| QSGMII_SW1_B, |
| SGMII_2500_FM1_DTSEC1, |
| SGMII_2500_FM1_DTSEC2, |
| SGMII_2500_FM1_DTSEC3, |
| SGMII_2500_FM1_DTSEC4, |
| SGMII_2500_FM1_DTSEC5, |
| SGMII_2500_FM1_DTSEC6, |
| SGMII_2500_FM1_DTSEC9, |
| SGMII_2500_FM1_DTSEC10, |
| SGMII_2500_FM2_DTSEC1, |
| SGMII_2500_FM2_DTSEC2, |
| SGMII_2500_FM2_DTSEC3, |
| SGMII_2500_FM2_DTSEC4, |
| SGMII_2500_FM2_DTSEC5, |
| SGMII_2500_FM2_DTSEC6, |
| SGMII_2500_FM2_DTSEC9, |
| SGMII_2500_FM2_DTSEC10, |
| TX_CLK, |
| SERDES_PRCTL_COUNT |
| }; |
| |
| enum srds { |
| FSL_SRDS_1 = 0, |
| FSL_SRDS_2 = 1, |
| }; |
| |
| #endif |
| |
| int is_serdes_configured(enum srds_prtcl device); |
| void fsl_serdes_init(void); |
| int serdes_get_first_lane(u32 sd, enum srds_prtcl device); |
| enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); |
| int is_serdes_prtcl_valid(int serdes, u32 prtcl); |
| int serdes_get_number(int serdes, int cfg); |
| void fsl_rgmii_init(void); |
| |
| #ifdef CONFIG_FSL_LSCH2 |
| const char *serdes_clock_to_string(u32 clock); |
| int get_serdes_protocol(void); |
| #endif |
| #ifdef CONFIG_SYS_HAS_SERDES |
| /* Get the volt of SVDD in unit mV */ |
| int get_serdes_volt(void); |
| /* Set the volt of SVDD in unit mV */ |
| int set_serdes_volt(int svdd); |
| /* The target volt of SVDD in unit mV */ |
| int setup_serdes_volt(u32 svdd); |
| #endif |
| |
| #endif /* __FSL_SERDES_H__ */ |